Listar Tecnología Cerámica – GITEC por título
Mostrando ítems 34-53 de 93
-
Effect of the addition of rice husk in technological properties of materials for the manufacture of ceramic
(Rasayan Journal of ChemistryIndia, 2021-06)In this study, the rice husk discarded by the agro-industrial rice company in the department of Norte de Santander (Colombia) was used to replace clay material in the manufacture of tile-type ceramics. The materials were ... -
Effect of the application technique on the colorimetric coordinates for a ceramic enamel
(Journal of Physics: Conference SeriesInglaterra, 2020-12)In ceramic tiles production processes for ornamental purposes, the industry uses enamel as raw materials that support the pigments that give coloration and tonal constancy in a glassy matrix. These parameters are of great ... -
Effect of the incorporation of residual sludge from water treatment on the technological properties of ceramic bodies: A review
(Journal of Physics: Conference Series, 2019-11-19)The disposal of sludge generated by water treatment by chemical coagulation is considered an environmental problem that has attracted attention of researchers worldwide, whose objective is to promote strategies for their ... -
Effect of the number of layers on surface topography of bismuth-titanium coatings
(Journal of Physics: Conference SeriesInglaterra, 2019-11-29)The objective of this research is to perform a topographic characterization by atomic force microscopy of the surface of bismuth titanate (Bi/Ti) coatings varying the number of layers deposited on the substrates, considering ... -
Effect of use residual sludge from watertreatment plants as a partial substitute forclay for refractory bricks production
(Revista UIS IngenieríasColombia, 2020-10-21)The sludge generated from water treatment has been classified as a potential environmental pollutant. Because of its chemical composition similar to clay, was proposed to evaluate the effect of its incorporation as a ... -
Effort and safety factor in the unions of wooden structures used as carbon mine sustainability, mine case Baseli, Colombia
(Contemporary Engineering SciencesBulgaria, 2018-08-30)The research has been dedicated to the study of the calculation of the stresses and design conditions given by the safety factor of operation of the structural members of the mines that use wood as their main support ... -
Elaboración Y Caracterización De Bloques Cerámicos Extruídos Usando Cenizas De La Combustión De Carbón A Escala De Laboratorio
(RespuestasColombia, 2020-01-01)Ashes resulting from the combustion of coal used to feed the hive furnaces of the ceramic industry of Norte de Santander, contain potentially hazardous pollutants for the environment and have no practical application so ... -
Empleo del residuo agroindustrial del plátano como sustituto parcial del feldespato en la formulación de pasta cerámica
(Revista UIS IngenieríasColombia, 2020-09-02)El objetivo de esta investigación fue analizar el uso de residuos agroindustriales del plátano como sustituto de feldespato para el desarrollo de baldosas cerámicas que cumplan con la Norma Técnica Colombiana - NTC 919. ... -
Estrategias para mejorar la productividad y competitividad de las empresas de calzado de Cúcuta
(Espacios, 2017)La presente investigación tiene como objetivo plantear estrategias para mejorar la productividad y competitividad de las empresas de calzado de Cúcuta. La población estuvo conformada por 32 empresas de calzado de Cúcuta, ... -
Evaluación de arcillas caoliniticas-illiticas provenientes de la formación guayabo del Área Metropolitana de Cúcuta, Norte de Santander, Colombia
(Revista IONColombia, 2017-07-28)La caracterización de arcillas procedentes de la Formación Guayabo del Área Metropolitana de Cúcuta, Norte de Santander (Colombia) es presentada. Los resultados obtenidos de estos análisis permiten determinar las propiedades ... -
Evaluation of mechanical wear in bismuth-titanium coatings synthesized by the sol-gel method and applied on 316 L stainless steel substrates
(Journal of Physics: Conference SeriesInglaterra, 2019-11)Steels are part of the basic equipment of most of the industrial framework, including very diverse sectors such as the oil, chemical and automotive industries. However, steels are susceptible to wear phenomena limiting ... -
Evaluation of micro-abrasion-corrosion on SiO2-TiO2-ZrO2 coatings synthesized by the sol-gel method
(Journal of Physics: Conference SeriesEstados Unidos, 2016-02-12)The medical science and the engineering, work to improve the materials used in the manufacture of joint implants, since they have a direct impact on the quality of people life. The surgical interventions are increasing ... -
Evaluation of the wear-corrosion process in beta-tricalcium(β-TCP) films obtained by physical vapor deposition (PVD)
(Tribology in IndustryBelgrado , Serbia, 2019)A simultaneous evaluation was done of the wear-corrosion of the coatings of beta-tricalcium phosphate on titanium (Ti) substrate deposits obtained by the magnetron sputtering technique. The characterization was developed ... -
Experimentación comparativa de transferencia de calor por puente térmico a partir de la modificación de la geometría de los tabiques en bloque cerámico H10
(RespuestasColombia, 2020-01-01)The cooked block H10 of dimensions L: 300 mm, A: 100 mm, H: 200 mm and 6 rectangular cavities is the leading product of the ceramic masonry industry in the Norte de Santander region, this research takes as its starting ... -
Exploration of types of ventilated air chambers to improve thermal efficiency of bricks in fired clay
(Journal of Physics: Conference SeriesColombia, 2020-12-05)The products and construction systems for facades regulate energy transfer in the architectural envelopes. Therefore, this paper developed an exploration of types of ventilated air chambers to improve thermal efficiency ... -
Fly ash as to solidify liquid radioactive waste
(Journal of Physics: Conference SeriesInglaterra, 2020-12)The "Termopaipa" power plant located in Boyaca, Colombia, generates electricity based on coal and whose residue is fly ash. In this study we consider it important to understand its physical, chemical and morphological ... -
Formación ciudadana en comportamientos urbanos responsables: Etnografía rápida orientada a la convivencia en el espacio público urbano
(Cuadernos de Vivienda y UrbanismoColombia, 2018-06-05)Se desarrolló un estudio dirigido a analizar el efecto del diseño de un metacontingencia apoyada en una señalización urbana en el seguimiento de reglas que guían la adopción de comportamientos urbanos responsables a lo ... -
Geopolymers Based on a Mixture of Steel Slag and Fly Ash, Activated with Rice Husks and Reinforced with Guadua angustifolia Fibers
(Sustainability (Switzerland), 2023-08-15)At present, the conservation of the environment represents an objective that everyone wants to achieve. The construction industry has influenced the advancement of alternative materials that comply with sustainable ... -
Heat transfer generated in an underground mining environment
(Contemporary Engineering SciencesBulgaria, 2018-10-18)The transfer of heat in an underground environment is due to circumstances, natural and introduced elements. In an underground mine, the heat is generated by the geothermal gradient, the self-compression of the rocks, ... -
High-Temperature Corrosion Behavior of Bi3.75La0.25Ti3O12 and Bi3La1Ti3O12 Coating Prepared by rf Magnetron Sputtering
(MetalsSuiza, 2022-09-23): Using the rf magnetron sputtering technique, Bi3.75La0.25Ti3O12 and Bi3La1Ti3O12 coatings were formed and obtained as a thin film on Hastelloy substrates. When subjected to high-temperature conditions, the effect of ...