Listar Tecnología Cerámica – GITEC por título
Mostrando ítems 26-45 de 93
-
Determination of expandability clay from San José de Cúcuta metropolitan area, by adding different percentages of sewage sludge
(Journal of Physics: Conference SeriesReino Unido, 2019-11-19)This article shows the research carried out on clay from the San José de Cúcuta metropolitan area, Colombia, to which was added several percentages of a wastewater sludge, which is called as a technological nutrient. The ... -
Determination of the efficiency of hafnium carbide and tantalum carbide coatings deposited on exchange membrane fuel cells
(Rasayan Journal of ChemistryIndia, 2021-10) -
Developing a Ceramic Construction Product under Bioclimatic and Sustainable Architecture Principles
(Ciencia e Ingeniería NeogranadinaBogota , Colombia, 2020-12-09)The role of facades is fundamental to determine the energy performance of a building. According to the properties of construction elements, the heat transfer towards the interior can be strategically controlled to avoid ... -
DISEÑO DE UN PRODUCTO DE CONSTRUCCIÓN DE CONCRETO REFORZADO CON FIBRAS DE VIDRIO Y CON FIBRAS A PARTIR DE SUB-PRODUCTOS INDUSTRIALES
(Universidad Francisco de Paula SantanderCúcuta, Norte de Santander, 2021-08-25)El concreto es un material que ha sido utilizado desde la antigüedad en la construcción de edificaciones que han sobrevivido el paso de los años. El concreto a su vez ha sido foco de investigación por muchos científicos a ... -
Effect of forming technique BixSiyOz coatings obtained by solgel and supported on 316L stainless steel
(Journal of Physics: Conference SeriesEstados Unidos, 2016-02-12)BixSiyOz type coatings via sol-gel synthesized from bismuth nitrate pentahydrate, and tetraethyl orthosilicate as precursors; glacial acetic acid and 2-ethoxyethanol as solvents, and ethanolamine as complexing. The coatings ... -
Effect of layer thickness on anticorrosive performance of 316L steel coated with bismuth-titanium films
(Journal of Physics: Conference Series, 2021-05). Bismuth and titanium are elements with remarkable properties and applications in technological developments and in the field of biomedical engineering. The sol-gel method was used to form a bismuth-titanium system, ... -
Effect of nitrogen flow ratio on microstructure, mechanical and tribological properties of TiWSiN x thin film deposited by magnetron co-sputtering
(Applied Surface ScienceBogota , Colombia, 2018-10-31)We investigate the deposition of TiWSiNx thin films by means of the method of reactive magnetron co-sputtering, setting the nitrogen flow ratios N2/(Ar + N2) at 4.8%, 9.1%,16.7 and 33.3%. The crystallographic structure of ... -
Effect of Temperature on the Tribological Properties of Hafnium Carbonitrides Coatings
(Metals, 2023-04-21)For industrial processes in which refractory metals are necessary, hafnium carbonitride exhibits excellent performance due to its high thermal conductivity and resistance to oxidation. In this study, hafnium carbonitride ... -
Effect of the addition of rice husk in technological properties of materials for the manufacture of ceramic
(Rasayan Journal of ChemistryIndia, 2021-06)In this study, the rice husk discarded by the agro-industrial rice company in the department of Norte de Santander (Colombia) was used to replace clay material in the manufacture of tile-type ceramics. The materials were ... -
Effect of the application technique on the colorimetric coordinates for a ceramic enamel
(Journal of Physics: Conference SeriesInglaterra, 2020-12)In ceramic tiles production processes for ornamental purposes, the industry uses enamel as raw materials that support the pigments that give coloration and tonal constancy in a glassy matrix. These parameters are of great ... -
Effect of the incorporation of residual sludge from water treatment on the technological properties of ceramic bodies: A review
(Journal of Physics: Conference Series, 2019-11-19)The disposal of sludge generated by water treatment by chemical coagulation is considered an environmental problem that has attracted attention of researchers worldwide, whose objective is to promote strategies for their ... -
Effect of the number of layers on surface topography of bismuth-titanium coatings
(Journal of Physics: Conference SeriesInglaterra, 2019-11-29)The objective of this research is to perform a topographic characterization by atomic force microscopy of the surface of bismuth titanate (Bi/Ti) coatings varying the number of layers deposited on the substrates, considering ... -
Effect of use residual sludge from watertreatment plants as a partial substitute forclay for refractory bricks production
(Revista UIS IngenieríasColombia, 2020-10-21)The sludge generated from water treatment has been classified as a potential environmental pollutant. Because of its chemical composition similar to clay, was proposed to evaluate the effect of its incorporation as a ... -
Effort and safety factor in the unions of wooden structures used as carbon mine sustainability, mine case Baseli, Colombia
(Contemporary Engineering SciencesBulgaria, 2018-08-30)The research has been dedicated to the study of the calculation of the stresses and design conditions given by the safety factor of operation of the structural members of the mines that use wood as their main support ... -
Elaboración Y Caracterización De Bloques Cerámicos Extruídos Usando Cenizas De La Combustión De Carbón A Escala De Laboratorio
(RespuestasColombia, 2020-01-01)Ashes resulting from the combustion of coal used to feed the hive furnaces of the ceramic industry of Norte de Santander, contain potentially hazardous pollutants for the environment and have no practical application so ... -
Empleo del residuo agroindustrial del plátano como sustituto parcial del feldespato en la formulación de pasta cerámica
(Revista UIS IngenieríasColombia, 2020-09-02)El objetivo de esta investigación fue analizar el uso de residuos agroindustriales del plátano como sustituto de feldespato para el desarrollo de baldosas cerámicas que cumplan con la Norma Técnica Colombiana - NTC 919. ... -
Estrategias para mejorar la productividad y competitividad de las empresas de calzado de Cúcuta
(Espacios, 2017)La presente investigación tiene como objetivo plantear estrategias para mejorar la productividad y competitividad de las empresas de calzado de Cúcuta. La población estuvo conformada por 32 empresas de calzado de Cúcuta, ... -
Evaluación de arcillas caoliniticas-illiticas provenientes de la formación guayabo del Área Metropolitana de Cúcuta, Norte de Santander, Colombia
(Revista IONColombia, 2017-07-28)La caracterización de arcillas procedentes de la Formación Guayabo del Área Metropolitana de Cúcuta, Norte de Santander (Colombia) es presentada. Los resultados obtenidos de estos análisis permiten determinar las propiedades ... -
Evaluation of mechanical wear in bismuth-titanium coatings synthesized by the sol-gel method and applied on 316 L stainless steel substrates
(Journal of Physics: Conference SeriesInglaterra, 2019-11)Steels are part of the basic equipment of most of the industrial framework, including very diverse sectors such as the oil, chemical and automotive industries. However, steels are susceptible to wear phenomena limiting ... -
Evaluation of micro-abrasion-corrosion on SiO2-TiO2-ZrO2 coatings synthesized by the sol-gel method
(Journal of Physics: Conference SeriesEstados Unidos, 2016-02-12)The medical science and the engineering, work to improve the materials used in the manufacture of joint implants, since they have a direct impact on the quality of people life. The surgical interventions are increasing ...