Buscar
Mostrando ítems 1-10 de 10
Experimental study of the correlation the surface roughness 2D and 3D in the honing process of the steel cylinder
(Indian Journal of Science and Technology ISSN, 2018-08)
Objectives: This research proposes the feasibility of working on surfaces obtained by honing with 2D roughness
parameters, as the 3D roughness measurement commonly used in the industry requires many hours of measurement
time. ...
Probability parameters and estimated firestone abbott plateau honing curves
(Contemporary Engineering Sciences, 2018-09-12)
This paper developed a methodology for estimating Abbott-Firestone curves from
the roughness parameters of the material probability curves. The surface
roughness profile obtained in plateau-honing processes is the ...
Technical-economic study of the feed per tooth influence in a cylindrical milling process of alloyed steels
(International Journal of Engineering and Technology, 2018-07)
The economy of the machining process is an important point that has been given attention since
the beginning of the process. For this reason, this study focuses on the evaluation of the performance of
the cylindrical ...
A bibliometric analysis environmental impact assessment literature: An expanding and shifting focus
(Chemical Engineering Transactions, 2018-09)
A bibliometric analysis of the literature on the subject of Environmental Impact Assessment for a period from
2007 to 2015 was carried out under an expanding and shifting focus. For this purpose, the metadata used ...
Effects of depth of cut on cylindrical milling process in steel casting: A numerical study
(International Journal of ChemTech Research, 2018)
The complexity of the milling process has led us to study different
parameters, among which are the cutting speed, feed speed, chip volume, cutting time
and associated costs, which are the focus of this study. For this ...
Experimental study of the cutting processes effect on the surface hardness of ASTM A36 steel
(Contemporary Engineering Sciences, 2018-05-30)
This article analyses the hardness of ASTM-A36 steel both in its delivery state
and after various cutting processes. The material was cut with different methods
conventionally used in the metal-mechanic and construction ...
Regenerative chatter Phenomenon in the Turning Process based on the alloy steels 1020, 1035 and 1045
(International Journal of ChemTech Research, 2018)
Regenerative vibration is a major drawback in machining processes reducing the
geometric accuracy and dynamic stability of the cutting system. Achieving a dynamically stable
cutting operation represents a significant ...
Experimental study of the cutting processes on the microstructure of an ASTM A36 steel
(Contemporary Engineering Sciences, 2018-06-25)
This article analyses the microstructure of ASTM-A36 steel both in its delivery
state and after various cutting processes. The material was cut with some methods
conventionally used in the metal-mechanical and construction ...
Experimental study of the effect of cutting processes on the roughness of ASTM A36 steel
(Contemporary Engineering Sciences, 2018-06-06)
This article analyses the roughness of ASTM-A36 steel both in its delivery state
and after various cutting processes. The material was cut with different methods
conventionally used in the metal-mechanic and construction ...
Regenerative reassembly phenomenon in the turning process machining the A1020 steel
(Contemporary Engineering Sciences, 2018-08-01)
The chattering in the machine tools is a phenomenon that causes instability in the
machining process, surface finish with high roughness, also produces excessive
and accelerated wear on the tool in the metal cutting ...