Buscar
Mostrando ítems 1-10 de 21
Experimental characterization of the mechanical properties of PETG and PA6 thermoplastics
(Contemporary Engineering Sciences, 2018-09-12)
Simple thermoplastic materials and polymer matrix composites have been used in
this work. Polyethylene terephthalate glycol (PETG) plates, a copolymer of
CHDM- cyclohexane dimethanol modified polyethylene terephthalate ...
Development of non-conservative mechanical models applied to the low energy impact phenomenon
(Contemporary Engineering Sciences, 2018-07-18)
Non-conservative mechanical models are developed to be applied to the low
energy impact phenomenon. The analytical description of the proposed models is
made and the numerical solution of the system of differential ...
Study of the influence of the honing process by plastic deformation on the turning of AISI 1045steel
(Contemporary Engineering Sciences, 2018-09-18)
Burnishing is a machining process without chip removal that seeks to improve the
surface roughness of a component by means of plastic deformation of the surface
layers. Due to the process mechanics, during its execution, ...
Mechanical characterization of impact resistance by pendulum tensile test on PETG and PA6 thermoplastics
(Contemporary Engineering Sciences, 2018-09-18)
This article presents the results of the mechanical characterization of the impact
resistance of PETG and PA6 thermoplastic polymers. This type of polymer is
being widely used in industrial applications and the ...
Design of a ball burnishing tool with interchangeable tip
(Contemporary Engineering Sciences, 2018-09-18)
The following work was carried out with the goal of studying the functionality of a
previously realized design of an interchangeable indenter tool for the ball
burnishing process in a numerical control milling machine ...
Experimental study of the correlation the surface roughness 2D and 3D in the honing process of the steel cylinder
(Indian Journal of Science and Technology ISSN, 2018-08)
Objectives: This research proposes the feasibility of working on surfaces obtained by honing with 2D roughness
parameters, as the 3D roughness measurement commonly used in the industry requires many hours of measurement
time. ...
Probability parameters and estimated firestone abbott plateau honing curves
(Contemporary Engineering Sciences, 2018-09-12)
This paper developed a methodology for estimating Abbott-Firestone curves from
the roughness parameters of the material probability curves. The surface
roughness profile obtained in plateau-honing processes is the ...
Technical-economic study of the feed per tooth influence in a cylindrical milling process of alloyed steels
(International Journal of Engineering and Technology, 2018-07)
The economy of the machining process is an important point that has been given attention since
the beginning of the process. For this reason, this study focuses on the evaluation of the performance of
the cylindrical ...
Experimental study of the 2D variability roughness in the honing process of the steel cylinder
(Contemporary Engineering Sciences, 2018-05-29)
This article presents the study of the surface roughness inside cylinders, machined
by honing in industrial honing machines, with a detailed review of the variability
of the values obtained in the measurement of the ...
A bibliometric analysis environmental impact assessment literature: An expanding and shifting focus
(Chemical Engineering Transactions, 2018-09)
A bibliometric analysis of the literature on the subject of Environmental Impact Assessment for a period from
2007 to 2015 was carried out under an expanding and shifting focus. For this purpose, the metadata used ...