| dc.contributor.author | Florez-Vargas, Anderson | |
| dc.contributor.author | Sanchez Molina, Jorge | |
| dc.contributor.author | Garcia Morales, Felix Maria | |
| dc.contributor.author | Bautista-Ruiz, Jorge | |
| dc.date.accessioned | 2021-11-04T15:07:47Z | |
| dc.date.available | 2021-11-04T15:07:47Z | |
| dc.date.issued | 2018-12-07 | |
| dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/645 | |
| dc.description.abstract | The present study characterized the clays found in the Guayabo group in the metropolitan area of Cúcuta. Material samples were taken at 2km south of Cúcuta – El Zulia road, right on the border between the two municipalities. The objective was to evaluate the chemical, mineralogical composition and behavior of the raw material for the elaboration of ceramic tiles. Techniques such as X-ray diffraction and X-ray fluorescence were used. Physic-ceramic parameters were determined, such as the percentage of shrinkage per shot, water absorption and resistance to bending. The results showed a majority composition of quartz (above 57%), which is consistent with a high silica content (higher than 68%). Firing parameters revealed low contractions, a medium degree of water absorption, and a lower resistance value compared with the standard, therefore it is recommended to mix this clay with materials that improve the resistance value in order to comply with product quality standards. | eng |
| dc.format.mimetype | application/pdf | spa |
| dc.language.iso | eng | spa |
| dc.publisher | Journal of Physics: Conference Series | spa |
| dc.relation.ispartof | Journal of Physics: Conference Series | |
| dc.rights | Content from this work may be used under the terms of theCreative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltd | eng |
| dc.source | https://iopscience.iop.org/article/10.1088/1742-6596/1126/1/012036/meta | spa |
| dc.title | Technological characterization of Guayabo group clays from Cúcuta-El Zulia sector for use in ceramic industry | eng |
| dc.type | Artículo de revista | spa |
| dcterms.references | Abdelmalek B, Rekia B, Youcef B, Lakhdar B and Nathalie F 2017 Appl. Clay Sci. 136 176-183 | spa |
| dcterms.references | Garcia A 1985 Bol. Soc. Esp. Ceram. Vidr. 24 395-404 | spa |
| dcterms.references | Miloševi M, Logar M, Kaluđerović L and Jelić I 2017 Energy Procedia 125 650-5 | spa |
| dcterms.references | Departamento Nacional de Planeación (DNP) 2004 Cerámica cadenas productivas estructura, comercio internacional y protección (Colombia: Departamento Nacional de Planeación) | spa |
| dcterms.references | Sánchez-Molina J, Sarabia-Guarin A and Alvarez-Rozo D C 2016 Respuestas 21 48-56 | spa |
| dcterms.references | Sánchez J and Ramirez R P 2013 El clúster de la cerámica del área metropolitana de Cúcuta. (Cúcuta: Universidad Francisco de Paula Santander) | spa |
| dcterms.references | Departamento Administrativo Nacional de Estadística 2015 Encuesta anual manufacturera 2015 (Bogotá: DANE) | spa |
| dcterms.references | Oviedo J, Rios P, García G and Ochoa A 2016 Geología de la plancha 88-Cúcuta a escala 1: 100.000 departamento de Norte de Santander–Colombia (Colombia: Servicio Geológico Colombiano) | spa |
| dcterms.references | Medina H, García J and Nuñes D 2016 Revista Ciencias Técnicas Agropecuarias 16 19-24 | spa |
| dcterms.references | Ramón M L and Ramón M 2007 Introducción al método de Rietveld (México: Universidad Nacional Autónoma de México) | spa |
| dcterms.references | Instituto Colombiano de Normas Técnicas y Certificación (INCONTEC) 1998 Ingeniería civil y arquitectura. Baldosas cerámicas. Parte 3: Método de ensayo para determinar la absorción de agua, porosidad aparente, densidad relativa aparente y densidad aparente, Norma Técnica Colombiana, NTC 4321-3 (Colombia: Instituto Colombiano de Normas Técnicas y Certificación) | spa |
| dcterms.references | Instituto Colombiano de Normas Técnicas y Certificación (INCONTEC) 2015 Ingeniería civil y arquitectura. baldosas cerámicas. parte 4: método de ensayo para determinar el módulo de rotura y la resistencia a la flexion, Norma Técnica Colombiana, NTC 4321-4 (Colombia: Instituto Colombiano de Normas Técnicas y Certificación) | spa |
| dcterms.references | Gelves J F, Sanchez J and Peña G 2009 Respuestas 14 32-38 | spa |
| dcterms.references | Mahmoudi S, Srasra E and Zargouni F 2008 Appl. Clay Sci. 42 125-9 | spa |
| dcterms.references | Bernal I, Cabezas H, Espitia C, Mojica J and Quintero J 2003 Ver. Acad. Colom. Cienc 27 569-78 | spa |
| dcterms.references | Mora R 2015 Caracterización de arcillas provenientes de la mina murano del municipio el zulia, Norte de Santander, Colombia (Pamplona: Universidad de Pamplona) | spa |
| dcterms.references | Baccour H, Medhioub M, Jamoussi F and Mhiri T 2009 J. Mater. Process. Technol. 209 2812-17 | spa |
| dcterms.references | Rado P 1990 Introducción a la tecnología cerámica (tecnología-cerámica) (Barcelona: Omega) | spa |
| dcterms.references | Instituto Colombiano de Normas Tecnicas y Certificación (INCONTEC) 2015 Baldosas cerámicas. definiciones, clasificación, características y rotulado, Norma Técnica Colombiana, NTC 919 (Colombia: Instituto Colombiano de Normas Técnicas y Certificación) | spa |
| dcterms.references | Escardino A, Amoros J L and Enrrique J E 1981 Bol. Soc. Esp. Ceram. Vidr. 20 17-24 | spa |
| dcterms.references | Sarabia A and Ramírez R 2017 Desarrollo de mezclas para la producción por prensado de baldosas cerámicas aligeradas (Cúcuta: Universidad Francisco de Paula Santander) | spa |
| dcterms.references | Elias X 1982 Bol. Soc. Esp. Ceram. Vidr. 21 99-114 | spa |
| dc.identifier.doi | 10.1088/1742-6596/1126/1/012036 | |
| dc.publisher.place | Colombia | spa |
| dc.relation.citationedition | Vol.1126 No.1.(2018) | spa |
| dc.relation.citationendpage | 8 | spa |
| dc.relation.citationissue | 1 (2018) | spa |
| dc.relation.citationstartpage | 1 | spa |
| dc.relation.citationvolume | 1126 | spa |
| dc.relation.cites | Florez, A. O., Sánchez, J., García, F. M., & Bautista-Ruiz, J. (2018, November). Technological characterization of Guayabo group clays from Cúcuta-El Zulia sector for use in ceramic industry. In Journal of Physics: Conference Series (Vol. 1126, No. 1, p. 012036). IOP Publishing. | |
| dc.relation.ispartofjournal | Journal of Physics: Conference Series | spa |
| dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
| dc.rights.creativecommons | Atribución 4.0 Internacional (CC BY 4.0) | spa |
| dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
| dc.type.content | Text | spa |
| dc.type.driver | info:eu-repo/semantics/article | spa |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
| oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
| oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
| dc.type.version | info:eu-repo/semantics/publishedVersion | spa |
