dc.contributor.author | Sanchez Molina, Jorge | |
dc.contributor.author | Sánchez Zúñiga, Jessica Viviana | |
dc.contributor.author | Diaz Fuentes, Carmen Xiomara | |
dc.date.accessioned | 2021-10-30T13:57:01Z | |
dc.date.available | 2021-10-30T13:57:01Z | |
dc.date.issued | 2020-09 | |
dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/504 | |
dc.description.abstract | Industrial organic waste reuse in product manufacturing processes is a strategy that strengthens the circular economy. Thanks to materials science, the coffee husk is considered a sustainable alternative that promotes industrial processes optimization in the ceramic industry and contributes to the energy efficiency of buildings. This paper summarizes the behavior of H10 blocks on a laboratory scale in 2 mixtures of clay and coffee husk fired in 3 different temperatures: 900 °C, 1000 °C, and 1100 °C, at the "Centro de Investigación en Materiales Cerámicos, Universidad Francisco de Paula Santander", Colombia; and evaluates the relationship of physical and mechanical properties with thermal behavior by heat transfer and heat fluxes, simulated in the analysis system software through the finite element method. The results support the improvement of thermal insulation capacity. Due to this, coffee husk combustion generates internal air chambers that increase the porosity of the product. In spite of, physical and mechanical properties contrast thermal benefits with increasing water absorption percentages and thus decreasing the compressive strength of samples. In conclusion, new materials development is a technological advance that expands possibilities to create new solutions for buildings and even improves standardized designs in the ceramic industry. | eng |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | eng | spa |
dc.publisher | Journal of Physics: Conference Series | spa |
dc.relation.ispartof | Journal of Physics: Conference Series | |
dc.rights | Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltd | eng |
dc.source | https://iopscience.iop.org/article/10.1088/1742-6596/1645/1/012013/meta | spa |
dc.title | Improvements in the thermal behavior in the manufacture of the H10 block using coffee husks as an alternative industrial additive | eng |
dc.type | Artículo de revista | spa |
dcterms.references | Sánchez-Molina J, Corpas F and Alvarez D 2018 Aplicaciones de los Nutrientes Tecnologicos en la Industria Ceramica del Area Metropolitana de Cúcuta (San José de Cúcuta: Ecoe Ediciones Ltda.) | spa |
dcterms.references | Shakir A, Naganathan S, Nasharuddin K and Mustapha B 2013 Australian Journal of Basic and Applied Sciences 7 812 | spa |
dcterms.references | Centro Nacional de Investigaciones del Café 2010 Los Subproductos del Cafe: Fuente de Energia Renovable (Colombia: Federacion Nacional de Cafeteros de Colombia) | spa |
dcterms.references | Salazar J, Garcia D and Olaya J 1984 Ingeniería e Investigación 8 51 | spa |
dcterms.references | Muñoz P, Mendivil M, Morales M and Muñoz L 2016 Materials and Structures 49 641 | spa |
dcterms.references | Eliche D, Martínez C, Martínez M, Cotes M, Pérez L, Cruz N and Corpas F 2011 Applied Clay Science 52 270 | spa |
dcterms.references | Phonphuak N and Chindaprasirt P 2015 Eco-Efficient Masonry Bricks and Blocks 6 (Thailand: Woodhead Publishing) Types of waste, properties, and durability of pore-forming waste-based fired masonry bricks 103-127 chapter | spa |
dcterms.references | Murmu A and Patel A 2018 Construction and Building Materials 165 112 | spa |
dcterms.references | Bories C, Borredon M, Vedrenne E and Vilarem G 2014 Journal of Environmental Management 143 186 | spa |
dcterms.references | Instituto Colombiano de Normas Tecnicas y Certificación (ICONTEC) 2018 Métodos para Muestreo y Ensayos de Unidades de Mampostería y Otros Productos de Arcilla, NTC 4017 (Colombia: Instituto Colombiano de Normas Tecnicas y Certificación) | spa |
dcterms.references | Instituto de Hidrología, Meteorología y Estudios Ambientales 2010 Atlas Interactivo de Colombia (Bogotá: Instituto de Hidrología, Meteorología y Estudios Ambientales) | spa |
dcterms.references | Instituto Colombiano de Normas Tecnicas y Certificación (ICONTEC) 2018 Unidades de Mampostería de Arcilla Cocida. Ladrillos y Bloques Cerámicos, NTC 4205 (Colombia: Instituto Colombiano de Normas Tecnicas y Certificación) | spa |
dcterms.references | Peña Rodríguez G, Sánchez-Molina J and Monroy R 2008 Revista Colombiana de Física 40 285 | spa |
dc.identifier.doi | 10.1088/1742-6596/1645/1/012013 | |
dc.publisher.place | Reino Unido | spa |
dc.relation.citationedition | Vol.1645 No.1.(2020) | spa |
dc.relation.citationendpage | 7 | spa |
dc.relation.citationissue | 1 (2020) | spa |
dc.relation.citationstartpage | 1 | spa |
dc.relation.citationvolume | 1645 | spa |
dc.relation.cites | Sánchez-Zúñiga, J. V., Sánchez-Molina, J., & Díaz-Fuentes, C. X. (2020, September). Improvements in the thermal behavior in the manufacture of the H10 block using coffee husks as an alternative industrial additive. In Journal of Physics: Conference Series (Vol. 1645, No. 1, p. 012013). IOP Publishing. | |
dc.relation.ispartofjournal | Journal of Physics: Conference Series | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.rights.creativecommons | Atribución 4.0 Internacional (CC BY 4.0) | spa |
dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
dc.type.content | Text | spa |
dc.type.driver | info:eu-repo/semantics/article | spa |
dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
dc.type.version | info:eu-repo/semantics/publishedVersion | spa |