Mostrar el registro sencillo del ítem

dc.contributor.authorCoba Salcedo, Milton Fabian
dc.contributor.authorRojas Suárez, Jhan Piero
dc.contributor.authorAcevedo Peñaloza, Carlos Humberto
dc.date.accessioned2021-12-08T17:02:12Z
dc.date.available2021-12-08T17:02:12Z
dc.date.issued2018-09-18
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/1746
dc.description.abstractBurnishing is a machining process without chip removal that seeks to improve the surface roughness of a component by means of plastic deformation of the surface layers. Due to the process mechanics, during its execution, a compressive residual stress is introduced into the surface of the workpiece during its execution, which improves various physical-mechanical properties of the component. This process has been used industrially since the 1950s, mainly in pieces made of soft materials (hardnesses up to 45 HRC), in operations subsequent to processes such as turning. The development of tools with harder materials, has opened up the possibility of burnishing on harder materials (hardnesses up to 62 HRC). Burnishing of hard materials has opened up an alternative to traditional finishing processes such as grinding, its main comparative advantage is its low-cost operation, which reduces grinding costs by 8 to 15 times. The plastic deformation burnishing is a metal working process with material removal whose advantages are that it does not generate waste, which is a competitive advantage over other surface finishing processes such as grinding, where waste is generated which also needs to be collected and subsequently treated. The use of e.g. coolants is not necessary either, in recent years, attempts have been made to eliminate them from material working processes, because their presence not only causes a significant cost that impacts the manufacturing process, also represents an environmental problem due to its polluting effect, with the associated management costs involved. This article presents the results of an AISI 1045 test specimen experiment, to which a turning process has previously been carried out.eng
dc.format.extent09 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherContemporary Engineering Sciencesspa
dc.relation.ispartofContemporary Engineering Sciences
dc.rights© 2018 Milton Coba Salcedo, Jhan P. Rojas and Carlos Acevedo Penaloza. This article is distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.eng
dc.sourcehttp://www.m-hikari.com/ces/ces2018/ces77-80-2018/88424.htmlspa
dc.titleStudy of the influence of the honing process by plastic deformation on the turning of AISI 1045steeleng
dc.typeArtículo de revistaspa
dcterms.referencesA.M.Hassan, A.M. Maqableh, The effect of initial burnishing parameters on non-ferrous components, Journal of Materials Processing Technology, 102 (2000), 115-121. https://doi.org/10.1016/s0924-0136(00)00464-7spa
dcterms.referencesM.H. El-Axir, An investigation into roller burnishing, International Journal of Machine Tool and Manufacture, 40 (2000), 1603-1617. https://doi.org/10.1016/s0890-6955(00)00019-5spa
dcterms.referencesM.M. El-Khabeery, M.H. El-Axir, Experimental techniques for studying the effects of milling-roller burnishing parameters on surface integrity, International Journal of Machine Tools and Manufacture, 41 (2001), 1705- 1719. https://doi.org/10.1016/s0890-6955(01)00036-0spa
dcterms.referencesPaul S. Prevey, N. Jayaraman, Overview of low plasticity burnishing for mitigation of fatigue damage mechanisms. In Proceeding(s) of the ICSP 9 on Shot Peening, (2005), 260.spa
dcterms.referencesH. Hamadache, L. Laouar, N.E. Zeghib, K. Chaoui, Characteristics of Rb40 Steel Superficial Layer under Ball and Roller burnishing, Journal of Material Processing Technology, 180 (2006), 130-136. https://doi.org/10.1016/j.jmatprotec.2006.05.013spa
dcterms.referencesS. Thamizhmnaii, B. Bin Omar, S. Saparudin, S. Hasan, Surface roughness investigation and hardness by burnishing on titanium alloy, Journal of Achievements in Materials and Manufacturing Engineering, 28 (2008), 139- 142.spa
dcterms.referencesTadeusz Hryniewicz, Krzysztof Rokosz, Corrosion behavior of c45 carbon steel after roller burnishing, Hradec nad Moravici.Metal, 5 (2005), 24-26.spa
dcterms.referencesP. Ravindra Babu, T. Siva Prasad, A. V. S. Raju, A. Jawahar Babu, Effects of internal roller burnishing on surface roughness and surface hardness of mild steel, Journal of Scientific & Industrial Research, 68 (2008), 29-31.spa
dcterms.referencesBinu C. Yeldose, B. Ramamoorthy, An Investigation into the High Performance of Tin-coated Rollers in Burnishing Process, Journal of Material Processing Technology, 207 (2008), 350-355. https://doi.org/10.1016/j.jmatprotec.2008.06.058spa
dcterms.referencesF. J. Shiou, C. H. Chang, Ultra precision surface finish of NAK 80 mould tool steel using sequential ball burnishing and ball polishing, Journal Material Process Technology, 201 (2008), no. 1-3, 554-559. https://doi.org/10.1016/j.jmatprotec.2007.11.235spa
dcterms.referencesC. S. Jawalkar, R. S. Walia, Experimental Investigations into Micro hardness in Roller Burnishing processes on EN-8 and Aluminum Specimens using design of experiments, In Proceeding(s) of the 2nd Intl & 23rd AIMTDR Conf., IIT Chennai, 2008, 733-739.spa
dcterms.referencesR.B. Alvarez, H.J. Martin, M.F. Horstemeyer, M.Q. Chandler, N. Williams, P.T. Wang, A. Ruiz, Corrosion relationships as a function of time and surface roughness on a structural AE44 magnesium alloy, Corros. Sci., 52 (2010), 1635–1648. https://doi.org/10.1016/j.corsci.2010.01.018spa
dcterms.referencesW. Li, D.Y. Li, Influence of surface morphology on corrosion and electronic behavior, Acta Mater., 54 (2006), 445–452. https://doi.org/10.1016/j.actamat.2005.09.017spa
dcterms.referencesL.G. Odintsov, Endurecimiento y Acabado de Piezas por Deformación Plástica Superficial. Manual. Moscu (URSS): Editorial Mashinostroenie, 1987, Cap. 2spa
dc.identifier.doihttps://doi.org/10.12988/ces.2018.88424
dc.publisher.placeBulgariaspa
dc.relation.citationeditionVol.11 No.79.(2018)spa
dc.relation.citationendpage3947spa
dc.relation.citationissue79(2018)spa
dc.relation.citationstartpage3939spa
dc.relation.citationvolume11spa
dc.relation.citesSalcedo, M. C., Rojas, J. P., & Peñaloza, C. A. (2018). Study of the Influence of the Honing Process by Plastic Deformation on the Turning of AISI 1045Steel. Contemporary Engineering Sciences, 11(79), 3939-3947.
dc.relation.ispartofjournalContemporary Engineering Sciencesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)spa
dc.subject.proposalhoning processeng
dc.subject.proposalplastic deformationeng
dc.subject.proposalturningeng
dc.subject.proposalAISI 1045 steeleng
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem