Mostrar el registro sencillo del ítem

Evaluation of micro-abrasion-corrosion on SiO2-TiO2-ZrO2 coatings synthesized by the sol-gel method

dc.contributor.authorBautista-Ruiz, Jorge
dc.contributor.authorAperador Chaparro, William Arnulfo
dc.contributor.authorCaballero Gómez, J
dc.date.accessioned2021-11-06T15:51:24Z
dc.date.available2021-11-06T15:51:24Z
dc.date.issued2016-02-12
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/704
dc.description.abstractThe medical science and the engineering, work to improve the materials used in the manufacture of joint implants, since they have a direct impact on the quality of people life. The surgical interventions are increasing worldwide with a high probability of a second or even a third intervention. Around these circumstances, it was evaluated the behaviour against microabrasion-corrosion phenomena on SiO2 TiO2 ZrO2 coatings, synthesized by the sol-gel method with concentration of the Si/Ti/Zr precursors: 10/70/20 and 10/20/70. The coatings were deposited on AISI 316 LVM stainless steel substrates. The morphological characterization of the wear was made by AFM techniques. It was observed that the coatings with higher levels of titanium have a good response to the phenomena of microabrasion-corrosion.eng
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherJournal of Physics: Conference Seriesspa
dc.relation.ispartofJournal of Physics: Conference Series
dc.rightsContent from this work may be used under the terms of theCreative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltdeng
dc.sourcehttps://iopscience.iop.org/article/10.1088/1742-6596/687/1/012031spa
dc.titleEvaluation of micro-abrasion-corrosion on SiO2-TiO2-ZrO2 coatings synthesized by the sol-gel methodeng
dc.typeArtículo de revistaspa
dcterms.referencesBautista-Ruiz J, Sandoval J and Ortiz C 2009 Revista Mexicana de Física 55 144spa
dcterms.referencesBrinker C and Scherer 1990 Sol-gel science the physics and chemistry of sol-gel processing (New York: Academic Press)spa
dcterms.referencesHech L and Ulrich D 1986 Science of ceramic chemical processing (New York: John Wiley & Sons)spa
dcterms.referencesKlein L 1988 Sol-gel technology for thin films, fibers, performs, electronics and speciality shape (New Yersey: Noyes Publications)spa
dcterms.referencesBautista-Ruiz J, Ortiz C, Vera E and Rodríguez-Páez J 2007 Rev Acad Colomb Cienc 31 235spa
dcterms.referencesYao T and Takashima K 1998 Biosens 13 67spa
dcterms.referencesLi H, Jin D, Yu Q and Tu H 2011 J Power Sources 196 3836spa
dcterms.referencesZalga A, Reklaitis J, Norkus E, Beganskiene A and Kareiva A 2006 Chem Phy 327 220spa
dcterms.referencesTao S, Wu Q, Zhan Z and Meng G 1999 Solid State Ionics 124 53spa
dcterms.referencesOlding T, Sayer M and Barrow D 2001 Thin Solid Films 398 581spa
dcterms.referencesCastro Y 2003 Recubrimientos protectores por deposici (Madrid: Instituto de Cerámica y Vidrio)spa
dcterms.referencesBautista-Ruiz J, Aperador W, Díaz M and Delgado E 2014 Int J Electrochem Sci 9 4144spa
dcterms.referencesStack M M, Rodling J, Mathew M T, Jawan H, Huang W, Park G and Hodge C 2010 Wear 269 376spa
dcterms.referencesGee M G, Gant A, Hutchintgs I, Schiffmann K, Van Acker K, Poulat S, Gachon Y and Von Stebut J 2002 Cratering or micro-abrasion wear testing of coating, measurement good practice guide (Teddington: National Physical Laboratory)spa
dcterms.referencesLi Y S, Wang K, He P, Huang B X and Kovacs P 1999 J Raman Spectrosc 30 97spa
dc.identifier.doi10.1088/1742-6596/687/1/012031
dc.publisher.placeEstados Unidosspa
dc.relation.citationeditionVol.687 No.1.(2016)spa
dc.relation.citationendpage4spa
dc.relation.citationissue1 (2016)spa
dc.relation.citationstartpage1spa
dc.relation.citationvolume687spa
dc.relation.citesRuiz, J. B., Aperador, W., & Gómez, J. C. (2016, February). Evaluation of micro-abrasion-corrosion on SiO2-TiO2-ZrO2 coatings synthesized by the sol-gel method. In Journal of Physics: Conference Series (Vol. 687, No. 1, p. 012031). IOP Publishing.
dc.relation.ispartofjournalJournal of Physics: Conference Seriesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail
Nombre:
Evaluation of micro-abrasion-c ...
Tamaño:
1.194Mb
Formato:
application/pdf
Ver/

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem