Mostrar el registro sencillo del ítem

dc.contributor.authorPulgarín, D A
dc.contributor.authorDe Plaza, J S
dc.contributor.authorRuge Cárdenas, Juan Carlos
dc.contributor.authorRojas, J P
dc.date.accessioned2022-12-06T20:27:15Z
dc.date.available2022-12-06T20:27:15Z
dc.date.issued2021-01-19
dc.identifier.urihttps://repositorio.ufps.edu.co/handle/ufps/6652
dc.description.abstractThis study proposes a methodology for the calibration of combined sewer overflow (CSO), incorporating the results of the three-dimensional ANSYS CFX model in the SWMM onedimensional model. The procedure consists of constructing calibration curves in ANSYS CFX that relate the input flow to the CSO with the overflow, to then incorporate them into the SWMM model. The results obtained show that the behavior of the flow over the crest of the overflow weir varies in space and time. Therefore, the flow of entry to the CSO and the flow of excesses maintain a non-linear relationship, contrary to the results obtained in the onedimensional model. However, the uncertainty associated with the idealization of flow methodologies in one dimension is reduced under the SWMM model with kinematic wave conditions and simulating CSO from curves obtained in ANSYS CFX. The result obtained facilitates the calibration of combined sewer networks for permanent or non-permanent flow conditions, by means of the construction of curves in a three-dimensional model, especially when the information collected in situ is limited.eng
dc.format.extent13 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherRevista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieriaspa
dc.relation.ispartofRevista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria. Vol.37 N°.1. (2021)
dc.rightsThis is an article distributed under the terms of the Creative Commons BY-NC-SA licenseeng
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/4.0/spa
dc.sourcehttps://www.scipedia.com/public/Pulgarin_et_al_2021a#spa
dc.titleHydraulic modeling of combined sewers overflow integrating the results of the swmm and CFX modelseng
dc.typeArtículo de revistaspa
dcterms.referencesU.S. Environmental Protection Agency. Combined sewer overflows guidance for monitoring and modeling. Washington, 1999.spa
dcterms.referencesCapital District Regional Planning Commission (CDRPC). Combined sewer system modeling work plan. New York, 2007.spa
dcterms.referencesRossman L.A. Storm water management model user’s manual, version 5.0. National Risk Management Research Laboratory, 2010.spa
dcterms.referencesHarwood R., Saul A.J. Modelling the performance of combined‐sewer overflow chambers. Water and Environment Journal, 15(4):300–304, 2001.spa
dcterms.referencesVazquez J., Kouyi G.L., Zug M. Modelling and instrumentation of the storm overflows of the combined sewer system of Sélestat. Urban Water Journal, 3(2):91–110, 2006.spa
dcterms.referencesHe C., Marsalek J., Rochfort Q., Krishnappan B.G. Case study: refinement of hydraulic operation of a complex CSO storage/treatment facility by numerical and physical modeling. Journal of Hydraulic Engineering, 132(2):131–139, 2006.spa
dcterms.referencesHe C., Marsalek J. Hydraulic optimization of a combined sewer overflow (CSO) storage facility using numerical and physical modeling. Canadian Journal of Civil Engineering, 36(2):363–373, 2009.spa
dcterms.referencesFach S., Sitzenfrei R., Rauch W. Determining the spill flow discharge of combined sewer overflows using rating curves based on computational fluid dynamics instead of the standard weir equation. Water Science and Technology, 60(12):3035–3043, 2009.spa
dcterms.referencesDufresne M., Vazquez J., Terfous A., Ghenaim A., Poulet J.-B. CFD modeling of solid separation in three combined sewer overflow chambers. Journal of Environmental Engineering, 135(9):776–787, 2009.spa
dcterms.referencesIsel S., Dufresne M., Bardiaux J.B., Fischer M., Vazquez J. Computational fluid dynamics based assessment of discharge-water depth relationships for combined sewer overflows. Urban Water Journal, 11(8):631–640, 2014.spa
dcterms.referencesChen Z., Han S., Zhou F.-Y., Wang K. A CFD modeling approach for municipal sewer system design optimization to minimize emissions into receiving water body. Water Resources Management, 27(7):2053–2069, 2013.spa
dcterms.referencesHarwood R. CSO modeling strategies using computational fluid dynamics. In Global Solutions for Urban Drainage, pp. 1–9, 2002.spa
dcterms.referencesGRUCON. Estudio de la rehabilitación del alcantarillado de la ciudad de Bogotá, 1999.spa
dcterms.referencesStovin V.R., Saul A.J. Computational fluid dynamics and the design of sewage storage chambers. Water and Environment Journal, 14(2):103–110, 2000.spa
dcterms.referencesDufresne M., Vazquez J., Terfous A., Ghenaim A., Poulet J.-B. Experimental investigation and CFD modelling of flow, sedimentation, and solids separation in a combined sewer detention tank. Computers & Fluids, 38(5):1042–1049, 2009.spa
dcterms.referencesCataño-Lopera Y.A., Bedoya D., Anderson N. Using computational fluid dynamics modeling to improve flow partition in a combined sewer diversion structure under supercritical flow. Proceedings of the Water Environment Federation, 2017(2):642–654, 2017.spa
dcterms.referencesKouyi G.L., Bret P., Didier J.-M., Chocat B., Billat C. The use of CFD modelling to optimise measurement of overflow rates in a downstream-controlled dual-overflow structure. Water Science and Technology, 64(2):521–527, 2011.spa
dc.contributor.corporatenameRevista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieriaspa
dc.identifier.doi10.23967/j.rimni.2021.01.006
dc.publisher.placeEspañaspa
dc.relation.citationeditionVol.37 N°.1. (2021)spa
dc.relation.citationendpage13spa
dc.relation.citationissue1(2021)spa
dc.relation.citationstartpage1spa
dc.relation.citationvolume37spa
dc.relation.citesPulgarín, D., Plaza, J., Cárdenas, J. C. R., & Rojas, J. P. (2021). Hydraulic modeling of combined sewers overflow integrating the results of the SWMM and CFX models. Métodos numéricos para cálculo y diseño en ingeniería: Revista internacional, 37(1), 1-964.
dc.relation.ispartofjournalRevista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieriaspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.subject.proposalnumerical modellingeng
dc.subject.proposalConstitutive modelseng
dc.subject.proposalHydraulic simulationeng
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

This is an article distributed under the terms of the Creative Commons BY-NC-SA license
Excepto si se señala otra cosa, la licencia del ítem se describe como This is an article distributed under the terms of the Creative Commons BY-NC-SA license