Show simple item record

dc.contributor.authorGARZÓN AGUDELO, PEDRO
dc.contributor.authorpalacios alvarado, wlamyr
dc.contributor.authorMedina Delgado, Byron
dc.date.accessioned2022-11-22T22:01:58Z
dc.date.available2022-11-22T22:01:58Z
dc.date.issued2022-01-05
dc.identifier.urihttps://repositorio.ufps.edu.co/handle/ufps/6596
dc.description.abstractThe 316 L steel is a type of stainless steel widely used in the medical industry, which in recent years has been studied for different uses in society. Being an engineering material, it is imperative to know its performance based on its physical and mechanical properties that allow identifying the response of this steel in addition to thin films as coatings. Bismuth and titanium have been recently used to improve the properties of 316 L steel, so they were used in this study. The sol-gel technique was used as the film forming method. The response of physical and mechanical properties was evaluated from the analysis of microhardness and coefficient of friction reported for the different types of steel-coating systems. Higher microhardness values were found for films with higher proportion of titanium. The coefficient of friction values is influenced by the system used, with higher values obtained for samples with a single coating layer.eng
dc.format.extent7spa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherJournal of Physics: Conference Seriesspa
dc.relation.ispartofJournal of Physics: Conference Series. Vol 2159 No°1[2022]
dc.rights© 2022 by the authorseng
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/spa
dc.sourcehttps://www.scopus.com/record/display.uri?eid=2-s2.0-85124302075&doi=10.1088%2f1742-6596%2f2159%2f1%2f012014&origin=inward&txGid=f1d4288fac35de5f90b0a6b6c7309c79spa
dc.titleCharacterization of physical properties of bismuth-titanium coatings on 316L stainless steeleng
dc.typeArtículo de revistaspa
dcterms.referencesBull S, Jones A 1994 Multilayer coatings for improved performance Surface and Coatings Technology 78(1-3) 173spa
dcterms.referencesLiu G, Tao N, Lu K 2010 316L austenite stainless steels strengthened by means of nanoscale twins Journal of Materials Science & Technology 26(4) 289spa
dcterms.referencesRojas Z 2016 Biocompatibilidad y Resistencia a la Corrosión de Recubrimientos de Titanato de Bismuto con un Abordaje desde la Perspectiva de la Bioética (Bogotá: Universidad Nacional de Colombia)spa
dcterms.referencesBrinker C, Scherer G 1990 Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing (San Diego: Academic Press)spa
dcterms.referencesBautista J, Duque E 2016 Synthesis and biocompatibility properties of bismuth-titanium thin films obtained by sol-gel process International Journal of Chemical Science 14(3) 1447spa
dcterms.referencesBautista J, Olaya J, Aperador W 2017 Biocompatibility of bismuth silicate coatings deposited on 316L stainless steel by sol-gel process Revista Facultad de Ingeniería, Universidad de Antioquia 84 27spa
dcterms.referencesGarzón P, Bautista J, Chaparro A 2019 Evaluation of mechanical wear in bismuth-titanium coatings synthesized by the sol-gel method and applied on 316 L stainless steel substrates Journal of Physics: Conference Series 1386(1) 012090:1spa
dcterms.referencesTapia J 2018 Factibilidad de Unión del Sistema Disímil: Compósito de Matriz Metálica de Aluminio Reforzado con Grafito/A380 Mediante el Proceso Brazing sin y con Deposición de Nanocapas de Bismuto (Saltillo: Corporación Mexicana de Investigación en Materiales)spa
dcterms.referencesLi T, Li H, Pan F 2001 Microstructure and nanoindentation hardness of Ti/TiN multilayered films Surface and Coatings Technology 137(2-3) 225spa
dcterms.referencesMeza J, Chavez C, Vélez J 2006 Técnicas de indentación: medición de propiedades mecánicas en cerámicas Dyna 73(149) 81spa
dcterms.referencesMeza J, Franco E, Farias M, Buiochi F, Souza R, Cruz J 2008 Medición del módulo de elasticidad en materiales de ingeniería utilizando la técnica de indentación instrumentada y de ultrasonido Revista de Metalurgia 44(1) 52spa
dcterms.referencesPazos L, Florez M, García J 2010 Comportamiento al desgaste y a la corrosión de un acero inoxidable martensítico con recubrimientos mono y multicapa para uso en herramental quirúrgico IBEROMET CONAMET/SAM Congreso Internacional de Metalurgia y Materiales (Viña del Mar: Sociedad Chilena de Metalurgia y Materiales)spa
dcterms.referencesArai T 2013 Thermoreactive deposition/diffusion process for surface hardening of steels ASM Handbook: Steel Heat Treating Fundamentals and Processes ed Dossett J, Totten G (Cleveland: ASM International)spa
dcterms.referencesSen U 2005 Friction and wear properties of thermo-reactive diffusion coatings against titanium nitride coated steels Materials and Design 26(2) 167spa
dc.contributor.corporatenameJournal of Physics: Conference Seriesspa
dc.identifier.doi10.1088/1742-6596/2159/1/012014
dc.publisher.placeReino Unidospa
dc.relation.citationeditionVol. 2159 No° 1 [2022]spa
dc.relation.citationendpage6spa
dc.relation.citationissue1[2022]spa
dc.relation.citationstartpage1spa
dc.relation.citationvolume2159spa
dc.relation.citesP A Garzón-Agudelo et al 2022 J. Phys.: Conf. Ser. 2159 012014 DOI 10.1088/1742-6596/2159/1/012014
dc.relation.ispartofjournalJournal of Physics: Conference Seriesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

© 2022 by the authors
Except where otherwise noted, this item's license is described as © 2022 by the authors