Show simple item record

dc.contributor.authorGARZÓN AGUDELO, PEDRO
dc.contributor.authorBautista-Ruiz, Jorge
dc.description.abstract. Bismuth and titanium are elements with remarkable properties and applications in technological developments and in the field of biomedical engineering. The sol-gel method was used to form a bismuth-titanium system, which allowed to establish if it was possible to obtain films with anticorrosive properties on 316L stainless steel. The anticorrosive response was evaluated by means of Tafel curves, defining the parameters to obtain thin and functional films with good tribological properties. The coatings were obtained by the spin coating technique, varying the spin speeds from 3000 rpm to 5000 rpm with monolayer and bilayer systems. More positive values of corrosion potential were obtained when the steel is coated by the films, which implies a lower propensity to corrosion in saline medium, lower corrosion rates and higher potentials are reported for films with higher titanium content, likewise, better efficiency of the films with respect to the uncoated substrate is presented, the higher the titanium content and a strong influence between the calculated efficiencies and the centrifugation speeds is not observedeng
dc.format.extent5 Pàginasspa
dc.publisherJournal of Physics: Conference Seriesspa
dc.relation.ispartofJournal of Physics: Conference Series Vol.2139 No.1 (2021)
dc.titleEffect of layer thickness on anticorrosive performance of 316L steel coated with bismuth-titanium filmseng
dc.typeDocumento de Conferenciaspa
dcterms.referencesCallister 2007 Introducción a la Ciencia e Ingeniería de los Materiales (Barcelona: Reverté)spa
dcterms.referencesMangonon P 2001 Ciencia de Materiales: Selección y Diseño (México: Pearson Educacional)spa
dcterms.referencesVelazquez M 2014 La Corrosión: El Peor de los Villanos Cuando Dominan los Metales (Buenos Aires: Universidad de Mar del Plata)spa
dcterms.referencesNavarrete E, Salgado O 2007 Determinación de la Corrosividad Atmosférica de las Ciudades de Santo Domingo y Esmeraldas (Quito: Escuela Politecnica Nacional)spa
dcterms.referencesSmith W, Hashemi J 2006 Fundamentos de la Ciencia e Ingeniería de Materiales (Mexico: McGrawHil)spa
dcterms.referencesRojas Z 2016 Biocompatibilidad y Resistencia a la Corrosión de Recubrimientos de Titanato de con un Abordaje desde la Perspectiva de la Bioética (Bogotá: Universidad Nacional de Colombia)spa
dcterms.referencesMendoza E, García C 2007 Recubrimientos por sol-gel sobre sustratos de acero inoxidable, revisión del estado del arte Dyna 74(153) 101spa
dcterms.referencesBenysek L, Fuierer P 2005 Photoresist modification of sol–gel solutions for texturing of Bi4Ti3O12 and Bi3TiNbO9 thin films Journal of Sol-Gel Science and Technology 34(3) 241spa
dcterms.referencesBautista J, Aperador W, Olaya J 2018 Effect of centrifugal speed on the anticorrosive properties of bismuth-silicon coatings by sol-gel on 316L substrates RASAYAN Journal of Chemistry 11(2) 597spa
dcterms.referencesAntunes R, Lorenzetti R, Higa O 2008 Corrosion and cytotoxic behaviour of passivated and tincoated 316l stainless steel Congresso Brasileiro de Engenharia e Ciência dos Materiais (Porto de Galinhas: Associação Brasileira de Cerâmica (ABC), Associação Brasileira de Metalurgia, Materiais e Mineração (ABM), and Associação Brasileira de Polímeros (ABPol))spa
dcterms.referencesAlférez F, Olaya J, Bautista J 2018 Synthesis and corrosion resistance of SiO2-TiO2-ZrO2-Bi2O3 coatings spin-coated on Ti6Al4V alloy Ceramics International 44(2) 2123spa
dcterms.referencesAperador W, Amaya C, Bautista J 2012 Evaluación de la resistencia a la corrosión erosión de recubrimientosmulticapas de TiN/AlTiN Revista Latinoamericana de Metalurgia y Materiales 32(2) 210spa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa

Files in this item


This item appears in the following Collection(s)

Show simple item record
Except where otherwise noted, this item's license is described as