dc.contributor.author | Peralta Hernandez, Edwin | |
dc.contributor.author | Sorzano Jimenez, Francisco | |
dc.contributor.author | Coba Salcedo, Milton Fabian | |
dc.contributor.author | Acevedo Peñaloza, Carlos Humberto | |
dc.contributor.author | Valencia Ochoa, Guillermo | |
dc.date.accessioned | 2021-12-12T23:35:32Z | |
dc.date.available | 2021-12-12T23:35:32Z | |
dc.date.issued | 2018-06-25 | |
dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/6384 | |
dc.description.abstract | This article analyses the microstructure of ASTM-A36 steel both in its delivery
state and after various cutting processes. The material was cut with some methods
conventionally used in the metal-mechanical and construction industry, in
addition to other non-conventional processes used to a lesser extent in the same
industry. Similarly, similar cuts were made to maintain test homogeneity and to
analyze the faces of the cut on each specimen in a similar manner. Among the
conventional cuts made to the specimens are the milling, oxy-cutting and cutting
machine, while the unconventional cuts applied were the wire by EDM and
plasma, maintaining as far as possible similar cutting and working parameters.
Subsequently, the cut surface of each of the specimens was analyzed and
microscopic images of their microstructure were taken, from the results differences were established and it was defined which of the cutting methods used had the
greatest effect on the material. | eng |
dc.format.extent | 08 páginas | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | eng | spa |
dc.publisher | Contemporary Engineering Sciences | spa |
dc.relation.ispartof | Contemporary Engineering Sciences | |
dc.rights | © 2018 Edwin Peralta Hernandez, Francisco Sorzano Jimenez, Milton F. Coba Salcedo, Carlos Acevedo Penaloza and Guillermo Valencia Ochoa. This article is distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. | eng |
dc.source | http://www.m-hikari.com/ces/ces2018/ces45-48-2018/85238.html | spa |
dc.title | Experimental study of the cutting processes on the microstructure of an ASTM A36 steel | eng |
dc.type | Artículo de revista | spa |
dcterms.references | J. M. S. Eng and H. Mf, Analysis of Mechanical Behavior and Microstructural Characteristics Change of ASTM A-36 Steel Applying Various Heat Treatment, Journal of Material Science & Engineering, 5 (2016), no. 2. | spa |
dcterms.references | S. Karagöz and H. F. Fischmeister, Metallographic observations on the wear process of TiN-coated cutting tools, Surf. Coatings Technol., 81 (1996), no. 2, 190–200. https://doi.org/10.1016/0257-8972(95)02487-5 | spa |
dcterms.references | H. Zhang, B. Long and Y. Dai, Metallography studies and hardness measurements on ferritic/martensitic steels irradiated in STIP, J. Nucl. Mater., 377 (2008), no. 1, 122–131. https://doi.org/10.1016/j.jnucmat.2008.02.037 | spa |
dcterms.references | A. Lawley and T. F. Murphy, Metallography of powder metallurgy materials, 51 (2004), no. 5, 315–327. https://doi.org/10.1016/j.matchar.2004.01.006 | spa |
dcterms.references | J. Kümmel, J. Gibmeier, E. Müller, R. Schneider, V. Schulze and A. Wanner, Detailed analysis of microstructure of intentionally formed built-up edges for improving wear behaviour in dry metal cutting process of steel, Wear, 311 (2014), no. 1, 21–30. https://doi.org/10.1016/j.wear.2013.12.012 | spa |
dcterms.references | X. Gao, W. Zeng, Q. Zhao, S. Zhang, M. Li and Z. Zhu, Acquisition of recrystallization information using optical metallography in a metastable beta titanium alloy, J. Alloys Compd., 727 (2017), 346–352. https://doi.org/10.1016/j.jallcom.2017.08.141 | spa |
dcterms.references | S. Coatings, Standard Guide for Preparation of Metallographic Specimens 1, 2012, 1–12. | spa |
dcterms.references | A. B. Gokhale and B. Sharbari, Sample Preparation For Metallography, in Characterization of Materials, American Cancer Society, 2012, 1–8. https://doi.org/10.1002/0471266965.com007.pub2 | spa |
dcterms.references | C. Jen‐Hao and P. Peng‐Chi, Using the microstructure and mechanical behavior of steel materials to develop a new fire investigation technology, Fire Mater., 41 (2017), no. 7, 864–870. https://doi.org/10.1002/fam.2438 | spa |
dcterms.references | A. B. P. B. Bhattacharyya, Modeling and analysis of white layer depth in a wire-cut EDM process through response surface methodology, The International Journal of Advanced Manufacturing Technology, 25 (2005), 301–302. https://doi.org/10.1007/s00170-003-2045-8 | spa |
dc.identifier.doi | https://doi.org/10.12988/ces.2018.85238 | |
dc.publisher.place | Bulgaria | spa |
dc.relation.citationedition | Vol.11 No.47.(2018) | spa |
dc.relation.citationendpage | 2340 | spa |
dc.relation.citationissue | 47(2018) | spa |
dc.relation.citationstartpage | 2333 | spa |
dc.relation.citationvolume | 11 | spa |
dc.relation.cites | Hernández, E. P., Jímenez, F. S., Salcedo, M. F. C., Peñaloza, C. A., & Ochoa, G. V. (2018). Experimental Study of the Cutting Processes on the Microstructure of an ASTM A36 Steel. | |
dc.relation.ispartofjournal | Contemporary Engineering Sciences | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.rights.creativecommons | Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) | spa |
dc.subject.proposal | Microstructure | eng |
dc.subject.proposal | Metallography | eng |
dc.subject.proposal | Cutting processes | eng |
dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
dc.type.content | Text | spa |
dc.type.driver | info:eu-repo/semantics/article | spa |
dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
dc.type.version | info:eu-repo/semantics/publishedVersion | spa |