| dc.contributor.author | Torres Sánchez, Diana Alexandra | |
| dc.contributor.author | Mora, Ricardo | |
| dc.contributor.author | Chaparro, Amanda | |
| dc.contributor.author | Sanchez Molina, Jorge | |
| dc.date.accessioned | 2021-11-02T14:55:06Z | |
| dc.date.available | 2021-11-02T14:55:06Z | |
| dc.date.issued | 2019-04-01 | |
| dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/593 | |
| dc.description.abstract | General properties of clays from Ceramica Murano Mine, in the municipality of El Zulia, Norte de Santander, have been investigated. Five clay samples were collected from different mantles of the mine. All the samples were characterized using chemical and mineralogical analysis, as well as physical properties like particle size, plasticity, drying and firing shrinkage and water absorption capacity. The chemical and mineralogical results indicated that all samples contained different amount of kaolinite and quartz, followed by hematite and anatase. Low amounts of muscovite were found mainly in samples F2 and F5. These clays are suitable for use as a raw material in creating ceramic construction products, especially for the manufacture of roof tiles and bricks according to the Winkler methodology. The variations found in the characterization of the raw material influence the technological properties of the ceramic that can be obtained from the clays under study. | eng |
| dc.description.abstract | Se evaluaron propiedades generales de arcillas de la Mina Cerámica Murano, ubicada en el municipio de El Zulia, Norte de Santander.
Cinco muestras de arcilla fueron recolectadas de diferentes mantos de la mina. Todas las muestras se caracterizaron mediante análisis
químico, mineralógico, y propiedades físicas como tamaño de partícula, plasticidad, secado, pérdidas por calcinación y capacidad de
absorción de agua. Los resultados indicaron que las muestras contenían diferentes cantidades de caolinita, cuarzo, hematita y anatasa. Se
encontraron bajas cantidades de moscovita principalmente en las muestras F2 y F5. Estas arcillas son adecuadas para su uso como materia
prima en la elaboración de productos cerámicos de construcción, especialmente para la fabricación de tejas y ladrillos según la metodología
de Winkler. Las variaciones encontradas en la caracterización de la materia prima influyen en las propiedades tecnológicas de la cerámica
que se puede obtener de las arcillas objeto de estudio. | spa |
| dc.format.mimetype | application/pdf | spa |
| dc.language.iso | eng | spa |
| dc.publisher | DYNA | spa |
| dc.relation.ispartof | DYNA | |
| dc.rights | Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0. | spa |
| dc.source | https://revistas.unal.edu.co/index.php/dyna/article/view/74291 | spa |
| dc.title | Physicochemical and mineralogical properties of clays used in ceramic industry at North East Colombia | eng |
| dc.type | Artículo de revista | spa |
| dcterms.references | Murray, H. Overview—clay mineral applications, Applied Clay Science, 5 (5-6), pp. 379-395, 1991. https://doi.org/10.1016/0169-1317(91)90014-Z | spa |
| dcterms.references | Suárez-Sanz F., Prias-Caicedo O., Bolaños-Bolaños C., Amarís de León C., Herrera-Cuéllar P., Informe final oportunidades para reducir las emisiones contaminantes SLCPS en el sub-sector de producción de ladrillos en Colombia, Bogotá, Corporación Ambiental Empresarial (CAEM), Universidad Autónoma Metropolitana de México (UAM), 2013, 24 P. | spa |
| dcterms.references | Sanchez, J., Gelves J., Romero Y. Caracterización tecnológica y del talento humano de las empresas fabricantes de cerámica roja ubicadas en el área metropolitana de Cúcuta, Respuestas, 17 (2), pp.71-80, 2012. http://dx.doi.org/10.22463/0122820X.423 | spa |
| dcterms.references | Perez, G., Vargas Y. and Córdoba E., Beneficio de una arcilla caolinítica de la región de Barichara (Santander) para la fabricación de refractarios. Dyna [Online]. 77 (164), 2010. [date of reference August 15th of 2018]. Available at: https://revistas.unal.edu.co/index.php/dyna/article/view/25573 | spa |
| dcterms.references | García, N., Ibarra, A. and López C., Caracterización de arcillas empleadas en pasta cerámica para la elaboración de ladrillos en la zona de Ocaña, Norte de Santander. Épsilon [Online]. 20, 2013. [date of reference August 15th of 2018]. Available at: https://revistas.lasalle.edu.co/index.php/ep/article/view/2195 | spa |
| dcterms.references | Gelves, J., Sánchez, J., Monroy, R., Ramirez, R. Estudio comparativo de las técnicas de extrusión y prensado como procesos de conformado de productos cerámicos de construcción en el Área Metropolitana de Cúcuta. Boletín de la Sociedad Española de Cerámica y Vidrio, 52 (1), pp. 48-54, 2013. https://doi.org/10.3989/cyv.62013 | spa |
| dcterms.references | Dondi, M., Raimondo, M. and Zanelli C. Clays and bodies for ceramic tiles: Reappraisal and technological classification. Applied Clay Science, 96, pp. 91-109, 2014. https://doi.org/10.1016/j.clay.2014.01.013 | spa |
| dcterms.references | Meseguer, S., Sanfeliu, T., Jordán, M. Classification and statistical analysis of mine spoils chemical composition from Oliete basin (Teruel, NE Spain). Environmental Geology, 56 (7), pp. 1461-1466. 2008. http://dx.doi.org/10.1007/s00254-008-1241-0 | spa |
| dcterms.references | Baccour, H., Medhioub, M., Jamoussi, F., Mhiri T. Influence of firing temperature on the ceramic properties of Triassic clays from Tunisia. Journal of Materials Processing Technology, 209 (6), pp. 2812-2817. 2009. https://doi.org/10.1016/j.jmatprotec.2008.06.055 | spa |
| dcterms.references | Cáceres, V., Sánchez, J., Chaparro, A. Evaluación de arcillas caoliniticas-illiticas provenientes de la formación guayabo del Área Metropolitana de Cúcuta, Norte de Santander, Colombia. Revista Ion, 30 (1), pp. 117-127. 2017. https://doi.org/10.18273/revion.v30n1-2017009 | spa |
| dcterms.references | ASTM D422-63 (2007)e2, Standard Test Method for Particle-Size Analysis of Soils, ASTM International, West Conshohocken, PA, 2007. Available at: http://www.astm.org | spa |
| dcterms.references | ASTM D4318-05, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, ASTM International, West Conshohocken, PA, 2005. Available at: http://www.astm.org | spa |
| dcterms.references | Monteiro, S., Vieira C. Influence of firing temperature on the ceramic properties of clays from Campos dos Goytacazes, Brazil. Applied Clay Science, 27 (3–4), pp. 229-234. 2004. https://doi.org/10.1016/j.clay.2004.03.002 | spa |
| dcterms.references | Meseguer, S., Pardo, F., Jordan M., Sanfeliu, T., González, I. Ceramic behaviour of some kaolins from Cauquenes Province (VII Region of Maule, Chile. Applied Clay Science, 52 (4), pp. 414-418. 2011. https://doi.org/10.1016/j.clay.2011.03.019 | spa |
| dcterms.references | Baioumy, H., Ismael, I. Composition, origin and industrial suitability of the Aswan ball clays, Egypt. Applied Clay Science, 102, pp. 202-212. 2014. https://doi.org/10.1016/j.clay.2014.09.041 | spa |
| dcterms.references | Zhou, H., Qiao, X., Yu, J. Influences of quartz and muscovite on the formation of mullite from kaolinite. Applied Clay Science, 80–81, pp. 176-181. 2013. http://dx.doi.org/10.1016/j.clay.2013.04.004 | spa |
| dcterms.references | Ghorbel, A., Fourati, M., Bouaziz, J. Microstructural evolution and phase transformation of different sintered Kaolins powder compacts. Materials Chemistry and Physics, 112 (3), pp. 876-885. 2008. https://doi.org/10.1016/j.matchemphys.2008.06.047 | spa |
| dcterms.references | Lecomte-Nana, G., Bonnet, J., Blanchart, P., Investigation of the sintering mechanisms of kaolin–muscovite. Applied Clay Science, 51(4), pp. 445-451. 2011. https://doi.org/10.1016/j.clay.2011.01.007 | spa |
| dcterms.references | Dondi, M., Fabbri, B., Guarini, G. Grain-size distribution of Italian raw materials for building clay products; a reappraisal of the Winkler diagram. Clay Minerals, 33 (3), 435-442. 1998. https://doi.org/10.1180/000985598545732 | spa |
| dcterms.references | Chaklader, A., Roberts, A. Transformation of quartz to cristobalite. Journal of the American Ceramic Society 44 (1), pp. 35-41. 1961. https://doi.org/10.1111/j.1151-2916.1961.tb15344.x | spa |
| dcterms.references | Mendes, J. Caracterización y estudio tecnológico de arcillas del Estado da Bahía (Brasil), para la obtención de materiales cerámicos tradicionales, Tesis de Doctorado, Universidad de Santiago de Compostela, Santiago de Compostela, España, 2010. | spa |
| dcterms.references | Agostini, L., Colaci, V., Dondi, M., Fabbri, B., Marsigli, M. Valutazione dell'idoneità di argille italiane per la cottura rapida di laterizi a bassa percentuale di foratura. L'industria dei laterizi [Online]. 47, pp. 299-312. 1997. [date of reference August 15th of 2018]. Available at: https://www.researchgate.net/profile/Michele_Dondi/publication/268506267_Valutazione_della_idoneita_alla_cottura_rapida_di_argille_italiane_per_laterizi_a_bassa_percentuale_di_foratura/links/546cffa70cf2a7492c55aff7/Valutazione-della-idoneita-alla-cottura-rapida-di-argille-italiane-per-laterizi-a-bassa-percentuale-di-foratura.pdf | spa |
| dcterms.references | Muñoz, R., Muñoz, J., Mancilla, P., Rodríguez, J. Caracterización fisicoquímica de arcillas del municipio de Guapi–costa Pacífica Caucana (Colombia). Revista de la Academia Colombiana de Ciencias exactas, físicas y naturales [Online]. 31 (121), pp. 537-544. 2007. [date of reference August 15th of 2018]. Available at: https://www.researchgate.net/profile/Javier_Munoz_Chaves/publication/277712668_Caracterizacion_fisicoquimica_de_arcillas_del_municipio_de_Guapicosta_Pacifica_Caucana_Colombia/links/5570fd0408ae2f213c223bfa/Caracterizacion-fisicoquimica-de-arcillas-del-municipio-de-Guapi-costa-Pacifica-Caucana-Colombia.pdf | spa |
| dcterms.references | Bain, A. A plasticity chart as an aid to the identification and assessment of industrial clays. Clay Minerals 9 (1), pp. 1-17. 1971. https://doi.org/10.1180/claymin.1971.009.1.01 | spa |
| dc.coverage.country | North East Colombia | |
| dc.identifier.doi | https://doi.org/10.15446/dyna.v86n209.74291 | |
| dc.publisher.place | Colombia | spa |
| dc.relation.citationedition | Vol.86 No.209.(2019) | spa |
| dc.relation.citationendpage | 103 | spa |
| dc.relation.citationissue | 209 (2019) | spa |
| dc.relation.citationstartpage | 97 | spa |
| dc.relation.citationvolume | 86 | spa |
| dc.relation.cites | Torres Sanchez, D. A., Mora Basto, R. L., Chaparro García, A. L., & Sánchez Molina, J. (2019). Physicochemical and mineralogical properties of clays used in ceramic industry at North East Colombia. DYNA, 86(209), 97-103. https://doi.org/10.15446/dyna.v86n209.74291 | |
| dc.relation.ispartofjournal | DYNA | spa |
| dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
| dc.rights.creativecommons | Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) | spa |
| dc.subject.proposal | Clays | eng |
| dc.subject.proposal | properties | eng |
| dc.subject.proposal | ceramics | eng |
| dc.subject.proposal | El Zulia | spa |
| dc.subject.proposal | arcillas | spa |
| dc.subject.proposal | propiedades | spa |
| dc.subject.proposal | cerámica | spa |
| dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
| dc.type.content | Text | spa |
| dc.type.driver | info:eu-repo/semantics/article | spa |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
| oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
| oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
| dc.type.version | info:eu-repo/semantics/publishedVersion | spa |
