dc.contributor.author | Aperador Chaparro, William Arnulfo | |
dc.contributor.author | Bautista-Ruiz, Jorge | |
dc.contributor.author | Garzon, P | |
dc.date.accessioned | 2021-10-31T15:10:10Z | |
dc.date.available | 2021-10-31T15:10:10Z | |
dc.date.issued | 2019-11 | |
dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/534 | |
dc.description.abstract | Steels are part of the basic equipment of most of the industrial framework, including very diverse sectors such as the oil, chemical and automotive industries. However, steels are susceptible to wear phenomena limiting their life in use and losing efficiency in the applications to which it is intended leading to a technological and economic problem. In mechanical systems, lubrication requires effective strategies to ensure that the increase in critical contact voltages does not cause material failure during operation. Although there are different ways to avoid the wear of steel parts, the development of material technology has allowed the manufacture of new alloys with anti-wear properties. Replacing steels with other higher cost materials is very unfeasible. For this reason, one of the alternatives of greatest interest to reduce wear is based on the surface modification of the metal through the use of coatings. The sol-gel method allows the manufacture of coatings on steel parts to reduce wear. The objective of this work was to manufacture, using sol-gel, bismuth-titanium coatings on 316 L stainless steel substrates in order to analyze the mechanical wear of the system and evaluate its wear rates and friction coefficients. The study focused on determining the effect of precursor concentration on performance as a film to reduce wear. It was determined that the friction coefficients show significant variations due to adhesive wear processes. With respect to wear, it is concluded that the coatings offer substrate protection by indicating wear rates lower than those reported for 316 L stainless steel substrates without coating. | eng |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | eng | spa |
dc.publisher | Journal of Physics: Conference Series | spa |
dc.relation.ispartof | Journal of Physics: Conference Series | |
dc.rights | Content from this work may be used under the terms of theCreative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltd | eng |
dc.source | https://iopscience.iop.org/article/10.1088/1742-6596/1386/1/012090/meta | spa |
dc.title | Evaluation of mechanical wear in bismuth-titanium coatings synthesized by the sol-gel method and applied on 316 L stainless steel substrates | eng |
dc.type | Artículo de revista | spa |
dcterms.references | Hosseinalipour S, Ershad-langroudi A, Hayati A and Nabizade-Haghighi A 2010 Prog. Org. Coat. 67 371 | spa |
dcterms.references | Pourhashem S and Afshar A 2014 Ceram. Int. 40 993 | spa |
dcterms.references | Tiwari S, Mishra T, Gunjan M, Bhattacharyya A, Singh T and Singh R 2007 Surf. Coat. Technol. 201 7582 | spa |
dcterms.references | Balamurugan A, Kannan S and Rajeswari S 2005 Mater. Lett. 59 3138 | spa |
dcterms.references | Tiwari S, Adhikary J, Singh T and Singh R 2009 Thin Solid Films 517 4502 | spa |
dcterms.references | Adraider Y, Pang Y, Nabhani F, Hodgson S, Sharp M and Al-Waidh A 2013 Ceram. Int. 39 9665 | spa |
dcterms.references | Li D, Wang J, Chen J and Liang P 2014 J. Power Sources 272 448 | spa |
dcterms.references | Alferez L, Olaya J and Bautista-Ruiz J 2018 Bol. Soc. Esp. Ceram. Vidr. 57 195 | spa |
dcterms.references | Bautista-Ruiz J, Aperador W, Delgado A and Díaz-Lagos M 2014 Int. J. Electrochem. Sci. 9 4144 | spa |
dcterms.references | Brinker C and Scherer G 1990 Sol–gel science: The physics and chemistry of sol–gel processing (San Diego: Academic Press) 56 | spa |
dcterms.references | Wang D and Bierwagen G 2009 Prog. Org. Coat. 64 327 | spa |
dcterms.references | Guglielmi M 1997 J. Sol-Gel Sci. Technol. 8 443 | spa |
dcterms.references | Alférez F, Olaya J and Bautista Ruiz J 2018 Ceram. Int. 44 2123 | spa |
dcterms.references | Fedrizzi L, Rodriguez J, Rossi S, Deflorian F and Di-Maggio R 2001 Electrochimica Acta 46 3715 | spa |
dcterms.references | Sugama T 2005 Journal of Coatings Technology and Research 2 649 | spa |
dcterms.references | Tlili B, Barkaoui A and Walock M 2016 Tribology International 102 348 | spa |
dcterms.references | Burbank J and Woydt M 2016 Wear 360 29 | spa |
dcterms.references | Rohr O 2002 Ind. Lubr. Tribol. 54 153 | spa |
dcterms.references | Hein R 2000 Lubr. Eng. 56 45 | spa |
dcterms.references | Bautista-Ruiz J, Aperador W and Caicedo J 2018 Indian Journal of Science and Technology 11 1 | spa |
dcterms.references | Bautista-Ruiz J, Ruiz E, Duque J, Aperador W and Olaya J 2016 Int. J. Chem. Sci. 14 1447 | spa |
dcterms.references | American Society for Testing and Materials (ASTM) 2016 Standard test method for wear testing with a pin-on-disk apparatus, ASTM G99-05 (West Conshohocken: American Society for Testing and Materials) | spa |
dc.identifier.doi | 10.1088/1742-6596/1386/1/012090 | |
dc.publisher.place | Inglaterra | spa |
dc.relation.citationedition | Vol.1386 No.1.(2019) | spa |
dc.relation.citationendpage | 7 | spa |
dc.relation.citationissue | 1 (2019) | spa |
dc.relation.citationstartpage | 1 | spa |
dc.relation.citationvolume | 1386 | spa |
dc.relation.cites | Garzón, P., Bautista-Ruiz, J., & Chaparro, A. (2019, November). Evaluation of mechanical wear in bismuth-titanium coatings synthesized by the sol-gel method and applied on 316 L stainless steel substrates. In Journal of Physics: Conference Series (Vol. 1386, No. 1, p. 012090). IOP Publishing. | |
dc.relation.ispartofjournal | Journal of Physics: Conference Series | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.rights.creativecommons | Atribución 4.0 Internacional (CC BY 4.0) | spa |
dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
dc.type.content | Text | spa |
dc.type.driver | info:eu-repo/semantics/article | spa |
dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
dc.type.version | info:eu-repo/semantics/publishedVersion | spa |