Mostrar el registro sencillo del ítem

Wear and corrosion behaviour of Al2O3-TiO2 coatings produced by flame thermal projection

dc.contributor.authorHector Jaime, Dulce-Moreno
dc.contributor.authorFerrer, Martha
dc.contributor.authorVargas, Fabio
dc.date.accessioned2021-11-27T13:16:47Z
dc.date.available2021-11-27T13:16:47Z
dc.date.issued2017-12-29
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/1487
dc.description.abstractEvaluated the wear resistance and the coatings corrosion behaviour of Al2O3-TiO2 prepared by thermal spraying by flame on AISI 1020 carbon steel substrates, previously coated with an alloy base Ni. For this purpose, were controlled parameters of thermal spraying and the use of powders of similar but different chemical composition is taken as a variable commercial reference for ceramic coating. SEM images allowed to know the morphology of the powders and coatings. Electrochemical techniques (Tafel) were applied to evaluate the protection against corrosion. Coatings were tested for wear with a tribometer configuration bola-disco. It was determined that the phases present in coatings are directly relate to the behaviour against corrosion and wear them. Keywords: wear, corrosion, thermal imaging.eng
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherJournal of Physics: Conference Seriesspa
dc.relation.ispartofJournal of Physics: Conference Series
dc.rightsContent from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltdeng
dc.sourcehttps://iopscience.iop.org/article/10.1088/1742-6596/935/1/012021/metaspa
dc.titleWear and corrosion behaviour of Al2O3-TiO2 coatings produced by flame thermal projectioneng
dc.typeArtículo de revistaspa
dcterms.referencesPawloski L 2008 The science and engineering of thermal spray coatings 2 (New York: Wiley)spa
dcterms.referencesEspinosa A, Pacheco J, Ibarra L, Galván R and Espitia I 2011 Resistencia a la corrosión de películas cerámicas delgadas Superficies y Vacío 24 121-125spa
dcterms.referencesGarcia I, Fransaer J and Celis J P 2001 Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles Surface and Coatings Technology 148 171-178spa
dcterms.referencesOrlovskaya L, Periene N, Kurtinaitiene M and Surviliene S 1999 Ni–SiC composite plated under a modulated current Surface and Coatings Technology 111 234-239spa
dcterms.referencesBenea L, Bonora P L, Borello A and Martelli S 2002 Wear corrosion properties of nano-structured SiC–nickel composite coatings obtained by electroplating Wear 249 995-1003spa
dcterms.referencesCoronado J 2006 Efecto de la preparación superficial y aplicación de recubrimientos en la resistencia a la fatiga del acero SAE 1045 Scientia Et Technica 13 213-218spa
dcterms.referencesLiu C T and Stiegler J O 1990 ASM Metals handbook: Properties and selection: nonferrous alloys and special purpose materials 2 10 (USA: ASM International) Ordered Intermetallics 913-942spa
dcterms.referencesGardo M and Guilemany J 2014 Milestones in Functional Titanium Dioxide Thermal Spray Coatings: A Review Journal of Thermal Spray Technology 23 577-595spa
dcterms.referencesRomero M, Liscano S, Palomo A and Padilla P 2014 Caracterización morfológica de polvos cerámicos para la fabricación de recubrimientos termorrociados Iteckne 11 93-98spa
dcterms.referencesVargas F 2010 Development of thick ceramic layers with micrometric and nanometric structures by thermal spraying for tribological applications (France: University of Limoges)spa
dcterms.referencesWang Y, Jiang S, Wang M, Wang S, Xiao Danny and Strutt P R 2000 Abrasive Wear Characteristics of Plasma Sprayed Nanostructured Alumina/Titania Coatings Wear 237 176-185spa
dcterms.referencesRosso M, Scrivani A, Ugues D and Bertini S 2001 Corrosion Resistance and Properties of Pump Pistons Coated with Hard Materials Int. J. Refract. Met. Hard Mater 19 45-52spa
dc.identifier.doi10.1088/1742-6596/935/1/012021
dc.publisher.placeBogota , Colombiaspa
dc.relation.citationeditionVol.935 No.1.(2017)spa
dc.relation.citationendpage6spa
dc.relation.citationissue1 (2017)spa
dc.relation.citationstartpage2spa
dc.relation.citationvolume935spa
dc.relation.citesForero-Duran, M., Dulce-Moreno, H. J., Ferrer-Pacheco, M., & Vargas-Galvis, F. (2017, December). Wear and corrosion behaviour of Al2O3-TiO2 coatings produced by flame thermal projection. In Journal of Physics: Conference Series (Vol. 935, No. 1, p. 012021). IOP Publishing.
dc.relation.ispartofjournalJournal of Physics: Conference Seriesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail
Nombre:
Wear and corrosion behaviour of ...
Tamaño:
904.0Kb
Formato:
application/pdf
Ver/

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem