Mostrar el registro sencillo del ítem

dc.contributor.authorPeña Rodriguez, Gabriel
dc.contributor.authorMedrano Lindarte, Carmen Teresa
dc.contributor.authorGarcía-Páez, Ismael H.
dc.date.accessioned2021-11-25T21:10:30Z
dc.date.available2021-11-25T21:10:30Z
dc.date.issued2019-11-29
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/1439
dc.description.abstractThe compressive strength of concrete mixtures with accelerator additives designed for structural elements with strength of 5000 psi was correlated with the maturity index of concrete at an early age. The design of the mixture was made by adding the quantity of additives according to the specifications of the supplier. The maturity index was calculated using the thermal profile of the concrete dependent of the setting time, which was obtained through an automated adiabatic system. The number of thermal sensors required for temperature measurement dependent of setting time (1, 3, 7, 14 and 28 days) was determined by a factorial experimental design of two factors. The correlation coefficient was 0.96, so the logarithmic model adequately explains the variability of the compressive strength. The equation obtained was validated by means of the values of resistance to compression measured by the standard method for each age of the concrete; all values are within the calibration range of the resistances estimated by the maturity method.eng
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherJournal of Physics: Conference Seriesspa
dc.relation.ispartofJournal of Physics: Conference Series
dc.rightsContent from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltdeng
dc.sourcehttps://iopscience.iop.org/article/10.1088/1742-6596/1386/1/012066/metaspa
dc.titleDetermination of correlation of compressive strength with maturity of concrete mixed with acceleratoreng
dc.typeArtículo de revistaspa
dcterms.referencesDuarte Casas I D and Vargas González D M 2016 Correlación entre las fases del perfil térmico del concreto obtenido en condiciones de aislamiento térmico con los tiempos de fraguado (Bogotá: Universidad Distrital Francisco José de Caldas)spa
dcterms.referencesInstituto Colombiano de Normas Técnicas y Certificación (ICONTEC) 2010 Ensayo de resistencia a la compresión de especímenes de cilíndricos de concreto, Norma Técnica Colombiana, NTC 673 (Colombia: Instituto Colombiano de Normas Técnicas y Certificación)spa
dcterms.referencesAmerican Society for Testing and Materials (ASTM) 2005 Standard test method for compressive strength of cylindrical concrete specimens, ASTM C-39 (USA: American Society for Testing and Materials)spa
dcterms.referencesOkonkwo V O and Nwokike V M 2015 Effect of curing age on the compressive strength of concrete made from local granite chippings Journal of Multidisciplinary Engineering Science and Technology 2 2671-2675spa
dcterms.referencesBenaicha M, Burtschell Y and Alaoui A H 2016 Prediction of compressive strength at early age of concrete - application of maturity Journal of Building Engineering 6 119-125spa
dcterms.referencesHaach V G, Juliani L M and Da Roz M R 2015 Ultrasonic evaluation of mechanical properties of concretes produced with high early strength cement Construction and Building Materials 96 1-10spa
dcterms.referencesIchim A, Saleh F K, Teodoriu C and Sondergeld C 2019 Investigation of mechanical behavior and physical characteristic of portland cement: implications for destructive and non-destructive methods Journal of Petroleum Science and Engineering 177 123-134spa
dcterms.referencesZhang J, Cusson D, Monteiro P and Harvey J 2008 New perspectives on maturity method and approach for high performance concrete applications Cement and Concrete Research 38 1438-1446spa
dcterms.referencesAmerican Society for Testing and Materials (ASTM) 2011 Standard practice for estimating concrete strength by the maturity method, ASTM C-1074 (USA: American Society for Testing and Materials)spa
dcterms.referencesHan M C and Han C G 2010 Use of maturity methods to estimate the setting time of concrete containing super retarding agents Cement and Concrete Composites 32 164-172spa
dcterms.referencesAmerican Society for Testing and Materials (ASTM) 2018 Standard practice for making and curing concrete test specimens in the laboratory, ASTM C-192 (USA: American Society for Testing and Materials)spa
dcterms.referencesInstituto Colombiano de Normas Técnicas y Certificación (ICONTEC) 2015 Ensayo para determinar el asentamiento del concreto, Norma Técnica Colombiana, NTC 396 (Colombia: Instituto Colombiano de Normas Técnicas y Certificación)spa
dcterms.referencesAmerican Society for Testing and Materials (ASTM) 2009 ASTM C511-09 (USA: American Society for Testing and Materials) Standard specification for mixing rooms, moist cabinets, moist rooms, and water storage tanks used in the testing of hydraulic cements and concretespa
dcterms.referencesFerreira L, Branco F G, Costa H S S, Julio E and Maranha P 2015 Characterization of alkali-activated binders using the maturity method Construction and Building Materials 95 337-344spa
dcterms.referencesAspilcueta Asencios M U 2015 Análisis comparativo de la resistencia a la compresión del concreto estimada a partir de la utilización del método de madurez (Lima: Universidad Nacional de Ingeniería)spa
dcterms.referencesCastro-Garrido M C, López-Garzón M C, Alvarado Y A, Castaño J O and Gasch I 2016 Aplicación del método de la madurez para la estimación del plazo de descimbrado de forjados construidos con sistemas industrializados Informes de la Construcción 68 e131spa
dcterms.referencesRudeli N and Santilli A 2014 Tiempos de desencofrado de elementos verticales de hormigón armado: método a través de coeficientes de maduración y encuesta en Uruguay Memoria Investigaciones en Ingeniería 12 45-55spa
dc.identifier.doi10.1088/1742-6596/1386/1/012066
dc.publisher.placeLondres, Reino Unidospa
dc.relation.citationeditionVol.1386 No.1.(2019)spa
dc.relation.citationendpage7spa
dc.relation.citationissue1 (2019)spa
dc.relation.citationstartpage1spa
dc.relation.citationvolume1386spa
dc.relation.citesMedrano, C. T., Peña-Rodríguez, G., & García-Páez, I. H. (2019, November). Determination of correlation of compressive strength with maturity of concrete mixed with accelerator. In Journal of Physics: Conference Series (Vol. 1386, No. 1, p. 012066). IOP Publishing.
dc.relation.ispartofjournalJournal of Physics: Conference Seriesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem