Show simple item record

dc.contributor.authorCELY ILLERA, LEONARDO
dc.contributor.authorCely Niño, J.
dc.contributor.authorCely Illera, C. V.
dc.date.accessioned2021-11-22T22:21:57Z
dc.date.available2021-11-22T22:21:57Z
dc.date.issued2018-07
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/1259
dc.description.abstractImproving the technological properties of a ceramic product without affecting its aesthetic quality is a daily challenge of the regional ceramic companies. To achieve this objective, analyzes were performed on an illitic-kaolinitic clay by adding corundum as an additive. The corundum content varied from 5% to 20% by weight with a particle size of less than 75 μm, being able to obtain products with low porosities and high mechanical resistance. This research is part of a series of studies carried out on an argillaceous raw material from the region of Norte de Santander (Colombia). The influence of the corundum content on the technological properties was evaluated. The results showed that corundum, when mixed with traditional raw materials, offers the conditions to be used as an additive in the production of ceramic products with increases of up to 67% in mechanical strength and a reduction of porosity of 46%, which can contribute to the development of value-added ceramic products for use in other technological applications.eng
dc.description.abstractMelhorar as propriedades tecnológicas de um produto cerâmico sem afetar sua qualidade estética é um desafio diário das empresas regionais de cerâmica. Para atingir este objetivo, foram realizadas análises em uma argila ilítica-caulinítica com adição de 5% a 20% em massa de coríndon com tamanho de partícula inferior a 75 μm, obtendo produtos com baixa porosidade e alta resistência mecânica. Esta pesquisa é parte de uma série de estudos realizada em uma matéria-prima argilosa da região do Norte de Santander (Colômbia). Foi estudado o efeito do teor de coríndon nas propriedades tecnológicas. Os resultados mostraram que o coríndon, quando adicionado a matérias-primas tradicionais, pode ser usado como um aditivo na manufatura de produtos cerâmicos com aumentos de até 67% na resistência mecânica e redução de porosidade de 46%, o que pode contribuir para o desenvolvimento de produtos cerâmicos com valor agregado para uso em outras aplicações tecnológicas.por
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherCeramicaspa
dc.relation.ispartofCeramica
dc.rightsThis is an open-access article distributed under the terms of the Creative Commons Attribution Licenseeng
dc.sourcehttps://www.scielo.br/j/ce/a/b8BS49YG6q4YtdVMMbmmZ7q/?lang=enspa
dc.titleEffects of corudum in the development of structural mechanical and tribological propietes of raw materials for the manufacture of structural productseng
dc.typeArtículo de revistaspa
dcterms.referencesG. Benveniste, C. Gazulla, P. Fullana, I. Celades, T. Ros, V. Zaera, B. Godes, Inf. Constr. 63, 522 (2011) 71.spa
dcterms.referencesW. Chih-Huang, L. Deng-Fong, C. Pen-Chi, Adv. Environ. Res. 7 (2003) 679.spa
dcterms.referencesL. Cely Illera, Rev. Fac. Ing. Univ. Antioquía 80 (2016) 31.spa
dcterms.referencesA. Safeer, I. Yaseen, M. Raz, Bol. Soc. Esp. Ceram. Vidr. 56 (2017) 131.spa
dcterms.referencesISO 8486-1, “Bonded abrasives: determination and designation of grain size distribution, part 1: macrogrits F4 to F220” (2011).spa
dcterms.referencesJ.F. Gelves, R. Monroy, J. Sánchez, R.P. Ramírez, Bol. Soc. Esp. Ceram. Vidr. 52, 1 (2013) 48.spa
dcterms.referencesAm. Soc. Test. Mater., ASTM C326-03: “Standard test method for drying and firing shrinkages of ceramic whiteware clays” (2011).spa
dcterms.referencesISO 10545-3, “Ceramic tiles - part 3: determination of water absorption, apparent porosity, apparent relative” (1995).spa
dcterms.referencesISO 10545-4, “Ceramic tiles - part 4: determination of modulus of rupture and breaking strength” (1994).spa
dcterms.referencesISO 10545-6, “Ceramic tiles - part 6: determination of resistance to deep abrasion for unglazed tiles” (1995).spa
dcterms.referencesC. Hoffmann, E.F.U. Carvalho, H.G. Riella, A.M. Bernardin, in: Congr. Mund. Calid. Azul. Pavim. Cerám., Castellon (2008) 149.spa
dcterms.referencesN.U. Kockal, Bol. Soc. Esp. Ceram. Vidr. 51, 5 (2012) 297.spa
dcterms.referencesJ.L. Amoros, A. Belda, M.J. Orts, A. Escardino, Bol. Soc. Esp. Ceram. Vidr. 31, 2 (1992) 109.spa
dcterms.referencesS. de Aza Pendas, Bol. Soc. Esp. Ceram. Vidr. 3, 4 (1964) 395.spa
dcterms.referencesA. Escardino Benlloch, J.L. Amores Albaro, J.E. Enrique Navarro, Bol. Soc. Esp. Ceram. Vidr. 20, 1 (1981) 17.spa
dcterms.referencesR. Galindo Renau, Prensas, moldes y prensado en la fabricación de baldosas cerámicas, Vol. 1, Macer, Italia (2008).spa
dcterms.referencesJ.L. Amoros, A. Moreno, M.J. Orts, A. Escardino, Bol. Soc. Esp. Ceram. Vidr. 29, 3 (1990) 151.spa
dcterms.referencesJ.L. Amorós, C. Felíu, E. Ginés, J.V. Agramunt, Bernardin, in: Congr. Mund. Calid. Azul. Pavim. Cerám., Castellon (1996) 153.spa
dcterms.referencesG.-H. Mahdavi, S. Arjmandnia, M. Fouladkar, in: Congr. Mund. Calid. Azul. Pavim. Cerám., Castellon (2016) 1.spa
dcterms.referencesM. Araque-Pabón, G. Peña-Rodríguez, F. Vargas-Galvis, TecnoLógicas 18, 35 (2015) 125.spa
dcterms.referencesS.N. Monteiro, J. Alexandre, J.I. Margem, R. Sánchez, C.M. Vieira, Constr. Build. Mater. 22 (2008) 1281.spa
dcterms.referencesL. Ven-Gen, Y. Ting-Hao, Mater. Sci. Eng. A. 485 (2008) 5.spa
dcterms.referencesJ. Gilabert, E. Zumaquero, C. Machí, J. Toledo, M.P. Gómez-Tena, Bol. Soc. Esp. Ceram. Vidr. 54, 5 (2015) 209.spa
dcterms.referencesN. Afanador García, G. Guerrero Gómez, R. Monroy Sepúlveda, Cienc. Ing. Neogranad. 22, 1 (2012) 43.spa
dcterms.referencesJ.F. Gelves Diaz, J. Sánchez Molina, G. Peña Rodríguez, Respuestas 14, 2 (2009) 32.spa
dcterms.referencesS.M. Rozo Rincón, J. Sánchez Molina, D.C. Álvarez, Cienc. Ing. Neogranad. 24, 1 (2014) 67.spa
dcterms.referencesISO 13006, “Ceramic tiles - definitions, classification, characteristics and marking” (1998).spa
dcterms.referencesA.L. Abitante, C.P. Bergmann, J.L. Ribeiro, Eng. Civ. 29 (2007) 71.spa
dcterms.referencesL. Esposito, A. Tucci, Bol. Soc. Esp. Ceram. Vidr. 39, 1 (2000) 165.spa
dcterms.referencesS. Ghasemi-Kahrizsangi, H.G. Dehsheikh, M. Boroujerdnia, Bol. Soc. Esp. Ceram. Vidr. 56 (2017) 83.spa
dc.identifier.doihttps://doi.org/10.1590/0366-69132018643712327
dc.publisher.placeMadrid , Españaspa
dc.relation.citationeditionVol.64 No.371.(2018)spa
dc.relation.citationendpage358spa
dc.relation.citationissue371 (2018)spa
dc.relation.citationstartpage352spa
dc.relation.citationvolume64spa
dc.relation.citesCely Illera, L., Cely, J., & Cely Illera, C. V. (2018). Effects of corundum in the development of structural, mechanical and tribological properties of raw materials for the manufacture of structural products. Cerâmica, 64, 352-358.
dc.relation.ispartofjournalCeramicaspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución-NoComercial 4.0 Internacional (CC BY-NC 4.0)spa
dc.subject.proposalcorundum wasteeng
dc.subject.proposalwater absorptioneng
dc.subject.proposalabrasioneng
dc.subject.proposalflexural strengtheng
dc.subject.proposaltribological behavioureng
dc.subject.proposalresíduo de coríndopor
dc.subject.proposalabsorção de águapor
dc.subject.proposalabrasãopor
dc.subject.proposalresistência à flexãopor
dc.subject.proposalcomportamento tribológicopor
dc.title.translatedEfeitos do coríndon no desenvolvimento de propriedades estruturais, mecânicas e tribológicas das matérias-primas para a fabricação de produtos estruturais
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record