Listar por tema "Biocompatibility"

Bismuth silicate, (BSO) thin films have been fabricated by sol–gel process. The stable sol was synthesized by using bismuth nitrate (III) pentahydrate and tetraethyl orthosilicate (TEOS). The films were deposited by ...

Objectives: This study was carried out in order to establish the potential offered by the sol-gel method to obtain Titanium/ Bismuth oxide coatings on 316L Stainless Steel (SS) substrates in biocompatibility applications. ...

Biocompatibility of bismuth silicate coatings deposited on 316L stainless steel by sol-gel process
...
Bautista-Ruiz, Jorge | 2017-09-25

Bismuth silicate, (BSO) thin films have been fabricated by sol–gel process. The stable sol was synthesized by using bismuth nitrate (III) pentahydrate and tetraethyl orthosilicate (TEOS). The films were deposited by spin-coating at 1500 rpm on Stainless Steel 316L. The films were characterized by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) besides the measured of the films thickness. This study aimed to evaluate the cell adhesion and cellular proliferation of osteoblast cells on BSO thin films and substrate 316L by MTT assay. It is concluded that the growth of osteoblasts is homogeneous in the surface of the coatings indicating that the medium offered by the films does not present active cytotoxicity and exceed in large number the level of cellular growth compared to Stainless Steel

LEER
Sol-Gel Synthesis of Titanium/Bismuth Oxide Coatings for Biocompatibility Applications on 316L Stainless Steel
...
Aperador Chaparro, William Arnulfo | 2018-05

Objectives: This study was carried out in order to establish the potential offered by the sol-gel method to obtain Titanium/ Bismuth oxide coatings on 316L Stainless Steel (SS) substrates in biocompatibility applications. Methods/Analysis: The stable sol was synthesized by using Bismuth nitrate (III) pentahydrate and Titanium (IV) butoxide. The coatings were deposited by spin-coating technique at 4000 rpm and characterized topographically by Scanning Electron Microscopy SEM and structurally by X-ray diffraction XRD. Through the techniques of polarization potentiodynamic curves and Electrochemical Impedance Spectroscopy (EIS), the anticorrosive response of the �ilms was evaluated. The thickness was then measured, and biocompatibility test was developed. Findings: It was found that the coatings with high composition of the precursor titanium (IV) butoxide offer the best results as an anticorrosive application. Likewise, the growth of cells was uniform on the �ilms indicating that the medium offered by the �ilms does not present active cytotoxicity and surpasses by a large number the cellular growth level compared to stainless steel. Applications /Improvement: 316L (SS) is very useful in implantology, for its low cost compared with other materials. The implanted steel suffers corrosion by the physiological �luids of body. Titanium/Bismuth coatings establish a barrier between body �luids and SS implant.

LEER

Repositorio Digital

Listar por tema "Biocompatibility"

Biocompatibility of bismuth silicate coatings deposited on 316L stainless steel by sol-gel process

Sol-Gel Synthesis of Titanium/Bismuth Oxide Coatings for Biocompatibility Applications on 316L Stainless Steel

Envíos recientes

Biocompatibility of bismuth silicate coatings deposited on 316L stainless steel by sol-gel process

Sol-Gel Synthesis of Titanium/Bismuth Oxide Coatings for Biocompatibility Applications on 316L Stainless Steel

Portales Institucionales

Enlaces de Interés

Contactos

Listar por tema "Biocompatibility"

Biocompatibility of bismuth silicate coatings deposited on 316L stainless steel by sol-gel process ﻿

Sol-Gel Synthesis of Titanium/Bismuth Oxide Coatings for Biocompatibility Applications on 316L Stainless Steel ﻿

Envíos recientes

Biocompatibility of bismuth silicate coatings deposited on 316L stainless steel by sol-gel process

Sol-Gel Synthesis of Titanium/Bismuth Oxide Coatings for Biocompatibility Applications on 316L Stainless Steel

Portales Institucionales

Biocompatibility of bismuth silicate coatings deposited on 316L stainless steel by sol-gel process

Sol-Gel Synthesis of Titanium/Bismuth Oxide Coatings for Biocompatibility Applications on 316L Stainless Steel