Mostrar el registro sencillo del ítem

dc.contributor.authorOrjuela Abril, Martha Sofia
dc.contributor.authorPabón León, J A
dc.contributor.authorRojas Suárez, J P
dc.date.accessioned2022-11-23T18:53:59Z
dc.date.available2022-11-23T18:53:59Z
dc.date.issued2021-06-04
dc.identifier.urihttps://repositorio.ufps.edu.co/handle/ufps/6602
dc.description.abstractIn this paper, a computerized analysis is performed to evaluate the effect of phase change materials on the performance of thermoelectric generators. This study was conducted using commercial OpenFOAM software. Analyze changes in temperature, potential and efficiency due to phase change materials. The study evaluated a variety of geometric and operational conditions, such as changes in material height and heat flux. The results obtained indicate that the presence of phase change material allows a significant increase in the temperature difference between the surfaces. The temperature difference is increased by 35% with a height of 3.25 mm. The temperature difference increases the potential of the thermoelectric generator and increases the maximum output voltage by 21%. Overall, phase change materials have been shown to improve thermoelectric efficiency by 23%. For test conditions, the maximum efficiency is 4.77%. From this result, it can be concluded that the phase change material is a promising alternative for improving the low efficiency of thermoelectric generators due to their heat storage capacity.eng
dc.format.extent08 Páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.relation.ispartofJournal of Physics: Conference Series, Volume 2046, 5+1 International Meeting for Researchers in Materials and Plasma Technology (5+1 IMRMPT), 2 - 4 June 2021, Medellín, Colombia
dc.rightsIOP Publishing Ltdeng
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/spa
dc.sourcehttps://iopscience.iop.org/article/10.1088/1742-6596/2046/1/012011/metaspa
dc.titleSimulation study of phase change materials operating in thermoelectric deviceseng
dc.typeArtículo de revistaspa
dcterms.referencesLamba R, Manikandan S, Kaushik S C 2018 Performance analysis and optimization of concentrating solar thermoelectric generator J. Electron. Mater 47 5310spa
dcterms.referencesValencia Ochoa G, Piero Rojas J, Duarte Forero J 2020 Advance exergo-economic analysis of a waste heat recovery system using orc for a bottoming natural gas engine Energies 13 267spa
dcterms.referencesValencia Ochoa G, Acevedo Peñaloza C, Duarte Forero J 2019 Thermo-economic assessment of a gas microturbine-absorption chiller trigeneration system under different compressor inlet air temperatures Energies 12 4643spa
dcterms.referencesOrr B, Akbarzadeh A, Mochizuki M, Singh R 2016 A review of car waste heat recovery systems utilising thermoelectric generators and heat pipes Appl. Therm Eng 101 490spa
dcterms.referencesRamírez R, Gutiérrez A S, Eras J J C, Valencia K, Hernández B, Forero J D 2019 Evaluation of the energy recovery potential of thermoelectric generators in diesel engines J. Clean. Prod 241 118412spa
dcterms.referencesConsuegra F, Bula A, Guillín W, Sánchez J, Duarte Forero J 2019 Instantaneous in-cylinder volume considering deformation and clearance due to lubricating film in reciprocating internal combustion engines Energies 12 1437spa
dcterms.referencesShittu S, Li G, Zhao X, Ma X, Akhlaghi Y G, Ayodele E 2019 Optimized high performance thermoelectric generator with combined segmented and asymmetrical legs under pulsed heat input power J. Power Sources 428 53spa
dcterms.referencesKarana D R, Sahoo R R 2018 Effect on TEG performance for waste heat recovery of automobiles using MgO and ZnO nanofluid coolants Case Stud. Therm. Eng 12 358spa
dcterms.referencesMohamed E S 2019 Development and performance analysis of a TEG system using exhaust recovery for a light diesel vehicle with assessment of fuel economy and emissions Appl. Therm Eng 147 661spa
dcterms.referencesLuo D, Wang R, Yu W 2019 Comparison and parametric study of two theoretical modeling approaches based on an air-to-water thermoelectric generator system J. Power Sources 439 227069spa
dcterms.referencesJaber H, Khaled M, Lemenand T, Ramadan M 2019 Effect of generator load on hybrid heat recovery system Case Stud. Therm. Eng 13 100359spa
dcterms.references] Mahmoudinezhad S, Rezaniakolaei A, Rosendahl L A 2019 Numerical parametric study on the performance of CPV-TEG hybrid system Energy Procedia 158 453spa
dcterms.referencesKarthick K, Suresh S, Joy G C, Dhanuskodi R 2019 Experimental investigation of solar reversible power generation in Thermoelectric Generator (TEG) using thermal energy storage Energy Sustain. Dev 48 107spa
dcterms.referencesDarkwa J, Calautit J, Du D, Kokogianakis G 2019 A numerical and experimental analysis of an integrated TEG-PCM power enhancement system for photovoltaic cells Appl. Energy 248 688spa
dcterms.referencesValencia G, Duarte J, Isaza-Roldan C 2019 Thermoeconomic analysis of different exhaust waste-heat recovery systems for natural gas engine based on ORC Appl. Sci 9 4017spa
dcterms.referencesAtouei S A, Ranjbar A A, Rezania A 2017 Experimental investigation of two-stage thermoelectric generator system integrated with phase change materials Appl. Energy 208 332spa
dcterms.referencesJaworski M, Bednarczyk M, Czachor M 2016 Experimental investigation of thermoelectric generator (TEG) with PCM module Appl. Therm. Eng 96 527spa
dcterms.referencesSaha S K, Srinivasan K, Dutta P 2008 Studies on optimum distribution of fins in heat sinks filled with phase change materials J. Heat Transfer 130 034505spa
dcterms.referencesAtouei S A, Rezania A, Ranjbar A A, Rosendahl L A 2018 Protection and thermal management of thermoelectric generator system using phase change materials: An experimental investigation Energy 156 311spa
dcterms.referencesManikandan S, Selvam C, Poddar N, Pranjyal K, Lamba R, Kaushik S C 2019 Thermal management of low concentrated photovoltaic module with phase change material J. Clean. Prod 219 359spa
dc.contributor.corporatenameJournal of Physics: Conference Seriesspa
dc.identifier.doi10.1088/1742-6596/2046/1/012011
dc.publisher.placeReino Unidospa
dc.relation.citationeditionVol. 2046 N0.012011 (2021)spa
dc.relation.citationendpage7spa
dc.relation.citationissue012011 (2021)spa
dc.relation.citationstartpage1spa
dc.relation.citationvolumeVol.2046spa
dc.relation.citesM S Orjuela-Abril et al 2021 J. Phys.: Conf. Ser. 2046 012011
dc.relation.ispartofjournalJournal of Physics: Conference Seriesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

IOP Publishing Ltd
Excepto si se señala otra cosa, la licencia del ítem se describe como IOP Publishing Ltd