| dc.contributor.author | Coba Salcedo, Milton Fabian | |
| dc.contributor.author | Acevedo Peñaloza, Carlos Humberto | |
| dc.contributor.author | Valencia Ochoa, Guillermo | |
| dc.date.accessioned | 2021-12-12T16:42:07Z | |
| dc.date.available | 2021-12-12T16:42:07Z | |
| dc.date.issued | 2018-07 | |
| dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/6381 | |
| dc.description.abstract | The economy of the machining process is an important point that has been given attention since
the beginning of the process. For this reason, this study focuses on the evaluation of the performance of
the cylindrical milling process, varying the feed rate per tooth for the operating conditions proposed in
the revised case study. This was done using a calculation algorithm in which the fixed parameters were
entered and the feed per tooth was varied. Finding benefits in terms of cutting speed, feed speed, cutting
time and more. Increased feed per tooth resulted in lower process costs. | eng |
| dc.format.extent | 05 páginas | spa |
| dc.format.mimetype | application/pdf | spa |
| dc.language.iso | eng | spa |
| dc.publisher | International Journal of Engineering and Technology | spa |
| dc.relation.ispartof | International Journal of Engineering and Technology | |
| dc.rights | © 2009 - 2021 Engg Journals Publications | eng |
| dc.source | http://www.enggjournals.com/ijet/abstract.html?file=18-10-03-096 | spa |
| dc.title | Technical-economic study of the feed per tooth influence in a cylindrical milling process of alloyed steels | eng |
| dc.type | Artículo de revista | spa |
| dcterms.references | G. Chryssolouris, N. Anifantis, and S. Karagiannis, “Laser Assisted Machining: An Overview,” J. Manuf. Sci. Eng., vol. 119, no. 4B, pp. 766–769, Nov. 1997. | spa |
| dcterms.references | X. Han and L. Tang, “Precise prediction of forces in milling circular corners,” Int. J. Mach. Tools Manuf., vol. 88, pp. 184–193, 2015. | spa |
| dcterms.references | M. San-Juan, Ó. Martín, M. del P. de Tiedra, F. J. Santos, R. López, and J. A. Cebrián, “Study of Cutting Forces and Temperatures in Milling of AISI 316L,” Procedia Eng., vol. 132, pp. 500–506, 2015. | spa |
| dcterms.references | L. Meng, M. Atli, and N. He, “Measurement of equivalent residual stresses generated by milling and corresponding deformation prediction,” Precis. Eng., vol. 50, pp. 160–170, 2017. | spa |
| dcterms.references | E. Diez, E. Leal-Muñoz, H. Perez, and A. Vizan, “Dynamic analysis of a piezoelectric system to compensate for workpiece deformations in flexible milling,” Mech. Syst. Signal Process., vol. 91, pp. 278–294, 2017. | spa |
| dcterms.references | J. Fei et al., “Investigation of moving fixture on deformation suppression during milling process of thin-walled structures,” J. Manuf. Process., vol. 32, pp. 403–411, 2018. | spa |
| dcterms.references | K. J. Kalinski and M. A. Galewski, “Optimal spindle speed determination for vibration reduction during ball-end milling of flexible details,” Int. J. Mach. Tools Manuf., vol. 92, pp. 19–30, 2015. | spa |
| dcterms.references | H. Moradi, G. Vossoughi, M. Behzad, and M. R. Movahhedy, “Vibration absorber design to suppress regenerative chatter in nonlinear milling process: Application for machining of cantilever plates,” Appl. Math. Model., vol. 39, no. 2, pp. 600–620, 2015. | spa |
| dcterms.references | X. Long, S. Ren, and P. Zheng, “Delayed State Feedback Control for Milling Process,” Procedia IUTAM, vol. 22, pp. 115–122, 2017. | spa |
| dcterms.references | M. E. Kara and E. Budak, “Optimization of Turn-milling Processes,” Procedia CIRP, vol. 33, pp. 476–483, 2015. | spa |
| dcterms.references | M. Groover, FUNDAMENTOS DE MANUFACTURA MODERNA, Mc Graw Hi. Mc Graw Hill, 2017. | spa |
| dc.identifier.doi | https://dx.doi.org/10.21817/ijet/2018/v10i3/181003096 | |
| dc.publisher.place | India | spa |
| dc.relation.citationedition | Vol.10 No.3.(2018) | spa |
| dc.relation.citationendpage | 842 | spa |
| dc.relation.citationissue | 3(2018) | spa |
| dc.relation.citationstartpage | 838 | spa |
| dc.relation.citationvolume | 10 | spa |
| dc.relation.cites | Salcedo, M.F., Peñaloza, C.A., & Ochoa, G.V. (2018). TECHNICAL-ECONOMIC STUDY OF THE FEED PER TOOTH INFLUENCE IN A CYLINDRICAL MILLING PROCESS OF ALLOYED STEELS. International Journal of Engineering and Technology. | |
| dc.relation.ispartofjournal | International Journal of Engineering and Technology | spa |
| dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
| dc.rights.creativecommons | Atribución 4.0 Internacional (CC BY 4.0) | spa |
| dc.subject.proposal | avance | eng |
| dc.subject.proposal | diente | eng |
| dc.subject.proposal | fresado | eng |
| dc.subject.proposal | costos | eng |
| dc.subject.proposal | velocidad | eng |
| dc.subject.proposal | corte | eng |
| dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
| dc.type.content | Text | spa |
| dc.type.driver | info:eu-repo/semantics/article | spa |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
| oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
| oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
| dc.type.version | info:eu-repo/semantics/publishedVersion | spa |
