| dc.contributor.author | Coba Salcedo, Milton Fabian | |
| dc.contributor.author | Acevedo Peñaloza, Carlos Humberto | |
| dc.contributor.author | Prada Botia, Gaudy Carolina | |
| dc.date.accessioned | 2021-12-11T15:20:38Z | |
| dc.date.available | 2021-12-11T15:20:38Z | |
| dc.date.issued | 2018-09-18 | |
| dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/6369 | |
| dc.description.abstract | In this article the results of the impact characterization of PETG and PA6
thermoplastics are presented, they have been characterized statically and
dynamically by the indentation test, and mathematical models developed in
previous works have also been used to adjust the obtained models. The Indenter
diameter of the impactor used were studied. The results have shown that the
specimen thickness influences the value of some of the measured properties as the
thickness increases, as well as that the impactor mass influences the velocity that
is printed during the test run. | eng |
| dc.format.extent | 11 páginas | spa |
| dc.format.mimetype | application/pdf | spa |
| dc.language.iso | eng | spa |
| dc.publisher | Contemporary Engineering Sciences | spa |
| dc.relation.ispartof | Contemporary Engineering Sciences | |
| dc.rights | © 2018 Milton F. Coba Salcedo, Carlos Acevedo Penaloza and Gaudy Prada Botia. This article is distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. | eng |
| dc.source | http://www.m-hikari.com/ces/ces2018/ces77-80-2018/88440.html | spa |
| dc.title | Influence of indenter diameter on dynamic indentation tests of PEGT and PA6 thermoplastics | eng |
| dc.type | Artículo de revista | spa |
| dcterms.references | L. Aretxabaleta, J. Aurrekoetxea, I. Urrutibeascoa, M. Sánchez-Soto, Characterisation of the impact behaviour of polymer thermoplastics, Polymer Testing, 24 (2005), no. 2, 145-151. https://doi.org/10.1016/j.polymertesting.2004.09.014 | spa |
| dcterms.references | S. Boria, A. Scattina, G. Belingardi, Impact behavior of a fully thermoplastic composite, Composite Structures, 167 (2017), 63-75. https://doi.org/10.1016/j.compstruct.2017.01.083 | spa |
| dcterms.references | X.C. Sun, L.F. Kawashita, A.S. Kaddour, M.J. Hiley, S.R. Hallett, Comparison of low velocity impact modelling techniques for thermoplastic and thermoset polymer composites, Composite Structures, 203 (2018), 659- 671. https://doi.org/10.1016/j.compstruct.2018.07.054 | spa |
| dcterms.references | Matthew Bondy, Pascal Pinter, William Altenhof, Experimental characterization and modelling of the elastic properties of direct compounded compression molded carbon fibre/polyamide 6 long fibre thermoplastic, Materials & Design, 122 (2017), 184-196. https://doi.org/10.1016/j.matdes.2017.03.010 | spa |
| dcterms.references | O. A. Jiménez Arévalo, Comportamiento A La Fractura De Composites Con Matriz De Poliestireno, PhD Tesis, Universidad Politécnica de Cataluña. Terrassa, 2002. | spa |
| dcterms.references | Marcus Schoßig, Christian Bierögel, Wolfgang Grellmann, Thomas Mecklenburg, Mechanical behavior of glass-fiber reinforced thermoplastic materials under high strain rates, Polymer Testing, 27 (2008), no. 7, 893- 900. https://doi.org/10.1016/j.polymertesting.2008.07.006 | spa |
| dcterms.references | J.L. Thomason, The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6, Com-posites Part A: Applied Science and Manufacturing, 40 (2009), no. 2, 114- 124. https://doi.org/10.1016/j.compositesa.2008.10.013 | spa |
| dcterms.references | S. Turner, Mechanical Testing of Plastics, 2nd Edition, The Plastics and Rubber Institute, Londres, 1983. | spa |
| dcterms.references | Gin Boay Chai, Periyasamy Manikandan, Low velocity impact response of fibre-metal laminates – A review, Composite Structures, 107 (2014), 363- 381. https://doi.org/10.1016/j.compstruct.2013.08.003 | spa |
| dcterms.references | Rafael Santiago, Wesley Cantwell, Marcílio Alves, Impact on thermoplastic fibre-metal laminates: Experimental observations, Composite Structures, 159 (2017), 800-817. https://doi.org/10.1016/j.compstruct.2016.10.011 | spa |
| dcterms.references | Norman Jones, Note on the impact behaviour of fibre-metal laminates, International Journal of Impact Engineering, 108 (2017), 147-152. https://doi.org/10.1016/j.ijimpeng.2017.04.004 | spa |
| dcterms.references | Matthew Bondy, William Altenhof, Low velocity impact testing of direct/inline compounded carbon fibre/polyamide-6 long fibre thermoplastic, International Journal of Impact Engineering, 111 (2018), 66- 76. https://doi.org/10.1016/j.ijimpeng.2017.08.012 | spa |
| dcterms.references | ISO 527-2:2012(en) Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics. | spa |
| dcterms.references | Javier Antonio Navas López. Estudio, Evaluación Y Modelado Del Comportamiento De Indentación Y Flexión-Indentación A Impacto De Baja Energía De Materiales Termoplásticos, PhD Thesis, Universidad Politecnica de Cataluña. Barcelona, 2008. | spa |
| dcterms.references | C. Hardy, C. N. Baronet and G. V. Tordion, The elasto-plastic indentation of a half-space by a rigid sphere, Journal of Numerical Methods in Engineering, 3 (1971), 451-462. https://doi.org/10.1002/nme.1620030402 | spa |
| dcterms.references | M. Sánchez-Soto, Comportamiento Mecánico y Fractura De Mezclas De Poliestireno y Microesferas De Vidrio, PhD Tesis, Universitat Politècnica de Catalunya, 2000. | spa |
| dcterms.references | J. Gámez Pérez, Relación Estructura-Propiedad En Placas Y Láminas De Polipropileno Y Copolímeros En Bloque Etileno-Propileno Obtenidas Por Diferentes Procesos De Transformación, PhD Tesis, Universitat Politècnica de Catalunya, 2006. | spa |
| dc.identifier.doi | https://doi.org/10.12988/ces.2018.88440 | |
| dc.publisher.place | Bulgaria | spa |
| dc.relation.citationedition | Vol.11 No.79.(2018) | spa |
| dc.relation.citationendpage | 3919 | spa |
| dc.relation.citationissue | 79(2018) | spa |
| dc.relation.citationstartpage | 3911 | spa |
| dc.relation.citationvolume | 11 | spa |
| dc.relation.cites | Salcedo, M. F. C., Peñaloza, C. A., & Botia, G. P. (2018). Influence of Sample Thickness and Indenter Mass on Dynamic Indentation Tests of PEGT and PA6 Thermoplastics. | |
| dc.relation.ispartofjournal | Contemporary Engineering Sciences | spa |
| dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
| dc.rights.creativecommons | Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) | spa |
| dc.subject.proposal | Impact resistance | eng |
| dc.subject.proposal | Indentation test | eng |
| dc.subject.proposal | PETG | eng |
| dc.subject.proposal | PA6 | eng |
| dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
| dc.type.content | Text | spa |
| dc.type.driver | info:eu-repo/semantics/article | spa |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
| oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
| oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
| dc.type.version | info:eu-repo/semantics/publishedVersion | spa |
