Mostrar el registro sencillo del ítem

Experimental study of the 2D variability roughness in the honing process of the steel cylinder

dc.contributor.authorAcevedo Peñaloza, Carlos Humberto
dc.contributor.authorValencia, Guillermo
dc.contributor.authorCoba Salcedo, Milton Fabian
dc.date.accessioned2021-11-02T19:18:06Z
dc.date.available2021-11-02T19:18:06Z
dc.date.issued2018-05-29
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/604
dc.description.abstractThis article presents the study of the surface roughness inside cylinders, machined by honing in industrial honing machines, with a detailed review of the variability of the values obtained in the measurement of the machined surface. The determination of the amount of measurement data on the cover is displayed to get characteristic mean values of the measured surface. For this reason, and due to the randomness of the surfaces machined by honing, an experimental study has been proposed to carry out this analysis, where the roughness has been measured with a roughness meter with a contact probe, since this type of instrument is widely used academically and especially industrially, and is apparently standardized by international standards such as ISO 3274 or ASME B46.1.eng
dc.format.extent08 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherContemporary Engineering Sciencesspa
dc.relation.ispartofContemporary Engineering Sciences
dc.rights© 2018 Milton Coba Salcedo, Carlos Acevedo Penaloza and Guillermo Valencia Ochoa. This article is distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.eng
dc.sourcehttp://www.m-hikari.com/ces/ces2018/ces37-40-2018/84157.htmlspa
dc.titleExperimental study of the 2D variability roughness in the honing process of the steel cylindereng
dc.typeArtículo de revistaspa
dcterms.referencesD. J. Whitehouse, (David J.), Handbook of Surface Metrology, Institute of Physics Pub, Bristol; Philadelphia, 1994.spa
dcterms.referencesASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay), 2002.spa
dcterms.referencesE.S. Gadelmawla, M.M. Koura, T.M.A. Maksoud, I.M. Elewa, H.H. Soliman, Roughness parameters, Journal of Materials Processing Technology, 123 (2002), 133-145. https://doi.org/10.1016/s0924-0136(02)00060-2spa
dcterms.referencesD. Whitehouse, Surface – A link between manufacture and function, Proc. Instn. Mech. Engrs., 192 (1978), 179-188. https://doi.org/10.1243/pime_proc_1978_192_018_02spa
dcterms.referencesFritz Klocke, Manufacturing Processes 2. Grinding, Honing, Lapping, RTWK Aachen, Springer-Verlag 2009. https://doi.org/10.1007/978-3-540-92259-9spa
dcterms.referencesS. Malkin, Grinding Technology: "Theory and Applications of Machining with Abrasives, Ellis Horwood, Chichester, 1989.spa
dcterms.referencesP. Demircioglu, 3.17 Topological Evaluation of Surfaces about Surface Finish, Chapter in Comprehensive Materials Finishing, edited by MSJ Hashmi, Elsevier, Oxford, 2017, 243-260.spa
dcterms.referencesG. Petropoulos, C. Pandazaras, J. Davim, Surface Texture Characterization and Evaluation Related to Machining, Chapter in Surface Integrity in Machining, J. David eds., Springer, London, 2010. https://doi.org/10.1007/978-1-84882-874-2_2spa
dcterms.referencesChin Y. Poon, Bharat Bhushan, Comparison of surface roughness measurements by stylus profiler, AFM, and non-contact optical profiler, Wear, 190 (1995), no. 1, 76-88. https://doi.org/10.1016/0043-1648(95)06697-7spa
dcterms.referencesISO 3274:1996, Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instrumentsspa
dcterms.referencesT.R. Thomas, Rough Surface, Imperial College Press, 1982.spa
dcterms.referencesFEPA, 61/97 - FEPA standard for superabrasives grain sizes, (1997).spa
dcterms.referencesISO 4287:1997. Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions, and surface texture parameters. https://doi.org/10.3403/01161286uspa
dcterms.referencesISO 13565-2. Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve.spa
dcterms.referencesE.S. Gadelmawla, M.M. Koura, T.M.A. Maksoud, I.M. Elewa, H.H. Soliman, Roughness parameters, Journal of Materials Processing Technology, 123 (2002), 133-145. https://doi.org/10.1016/s0924-0136(02)00060-2spa
dc.identifier.doihttps://doi.org/10.12988/ces.2018.84157
dc.publisher.placeBulgariaspa
dc.relation.citationeditionVol.11 No.38.(2018)spa
dc.relation.citationendpage1892spa
dc.relation.citationissue38(2018)spa
dc.relation.citationstartpage1885spa
dc.relation.citationvolume11spa
dc.relation.citesSalcedo, M. C., Peñaloza, C. A., & Ochoa, G. V. (2018). Experimental Study of the 2D Variability Roughness in the Honing Process of the Steel Cylinder.
dc.relation.ispartofjournalContemporary Engineering Sciencesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.subject.proposalHoning processeng
dc.subject.proposalmanufacturing processeng
dc.subject.proposalroughnesseng
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail
Nombre:
Experimental study of the 2D ...
Tamaño:
683.5Kb
Formato:
application/pdf
Ver/

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem