Mostrar el registro sencillo del ítem

dc.contributor.authorCoba Salcedo, Milton Fabian
dc.contributor.authorAcevedo Peñaloza, Carlos Humberto
dc.contributor.authorValencia, Guillermo
dc.date.accessioned2021-11-02T13:53:50Z
dc.date.available2021-11-02T13:53:50Z
dc.date.issued2018-08
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/590
dc.description.abstractObjectives: This research proposes the feasibility of working on surfaces obtained by honing with 2D roughness parameters, as the 3D roughness measurement commonly used in the industry requires many hours of measurement time. Methods/Statistical Analysis: In this article, we study the values of surface roughness in two dimensions and three dimensions measured inside cylinders, machined by honing in industrial honing machines. Hardness has been measured with a contact probe roughness meter, as this type of instrument is widely used in academic and especially industrial applications and is standardized in international standards such as ISO 3274 or ASME B46.1. Findings: It is concluded that due to the excellent association obtained, it is sufficient to work with adjustments in two dimensions to characterize the surface, since the roughness in three dimensions takes a long time to be measured with a contact roughness meter like the one used in this investigation, so 2D parameters can be used because due to their normal behavior, they offer competitive advantages due to their ease of determination and require shorter measurement times. Application/Improvements: Manufacturers of hydraulic cylinders, surface finish of the inner wall of internal combustion engines and all those applications where it is machined with honing.eng
dc.format.extent09 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherIndian Journal of Science and Technologyspa
dc.relation.ispartofIndian Journal of Science and Technology
dc.rightsThis work is licensed under a Creative Commons Attribution 4.0 International License.eng
dc.sourcehttps://indjst.org/articles/experimental-study-of-the-correlation-the-surface-roughness-2d-and-3d-in-the-honing-process-of-the-steel-cylinderspa
dc.titleExperimental study of the correlation the surface roughness 2D and 3D in the honing process of the steel cylindereng
dc.typeArtículo de revistaspa
dcterms.referencesThomas TR. Rough surfaces. London, New York: Longman; 1982. p. 1–261. PMCid:PMC226660.spa
dcterms.referencesAbebe M, Appl FC. Theoretical analysis of the basic mechanics of abrasive processes: Part I: General model. Wear. 1988; 126(3):251–66. https://doi. org/10.1016/0043-1648(88)90169-X.spa
dcterms.referencesLawrence KD, Ramamoorthy B. An accurate and robust method for the honing angle evaluation of cylinder liner surface using machine vision. The International Journal of Advanced Manufacturing Technology. 2011; 55(5–8):611– 21. https://doi.org/10.1007/s00170-010-3061-0spa
dcterms.referencesMichail SK, Barber GC. The effects of roughness on piston ring lubrication Part I: Model development. Tribology Transactions. 1995; 38(1):19–26. https://doi. org/10.1080/10402009508983375.spa
dcterms.referencesMichail SK, Barber GC. The effects of roughness on piston ring lubrication- Part II: The relationship between cylinder wall surface topography and oil film thickness. Tribology Transactions. 1995; 38(1):173–7. https://doi. org/10.1080/10402009508983394.spa
dcterms.referencesISO 25178-2. 2012. Geometrical Product Specifications (GPS)- Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters.Standard International Organization for Standardization; 2012. p. 1–47.spa
dcterms.referencesISO 4287. 1997. Geometrical Product Specifications (GPS)- Surface texture: Profile method- Terms, definitions and surface texture parameters.Standard International Organization for Standardization; 1997. p. 1–25.spa
dcterms.referencesISO 13565-2. 1996. Geometrical Product Specifications (GPS)- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve. Standard International Organization for Standardization; 1996. p. 1–6.spa
dcterms.referencesASME B46.1-2009, (Revision of ASME B46.1-2002). American National Standard. Surface Texture (Surface Roughness, Waviness, and Lay); 2002. p. 1–8.spa
dcterms.referencesCoba S. Aportaciones en el Modelado del Proceso de Honing y Plateau-Honing. Doctorado Universidad Politecnica De Cataluna Ingenieria Mecanica; 2012. PMCid:PMC3978779.spa
dcterms.referencesLee J, Malkin S, Barber GC. Mechanics of Honing. SME Technical Paper #FC90-233; 1990.spa
dcterms.referencesFEPA, 61/97 - FEPA standard for superabrasives grain sizes; 1997.spa
dcterms.referencesISO 3274. 1996. Geometrical Product Specifications (GPS)- Surface texture: Profile method- Nominal characteristics of contact (stylus) instruments. Standard International Organization for Standardization; 1996. p. 1–13.spa
dcterms.referencesStout KJ. Three-dimensional surface topography. 2nd Revised Ed. Elsevier Science and Technology. Penton Press; 2000. p. 1–320.spa
dc.identifier.doihttps://dx.doi.org/10.17485/ijst/2018/v11i29/123309
dc.publisher.placeIndiaspa
dc.relation.citationeditionVol.11 No.29.(2018)spa
dc.relation.citationendpage9spa
dc.relation.citationissue29(2020)spa
dc.relation.citationstartpage1spa
dc.relation.citationvolume11spa
dc.relation.citesSalcedo, M. F. C., Penaloza, C. A., & Ochoa, G. V. (2018). Experimental Study of the Correlation the Surface Roughness 2D and 3D in the Honing Process of the Steel Cylinder. Indian Journal of Science and Technology, 11(29), 1-9.
dc.relation.ispartofjournalIndian Journal of Science and Technologyspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.subject.proposalHoning Processeng
dc.subject.proposalSurface Roughnesseng
dc.subject.proposalSteel Cylindereng
dc.subject.proposal2D/3D Roughnesseng
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem