| dc.contributor.author | ACEVEDO PENALOZA, CARLOS | |
| dc.contributor.author | Valencia, Guillermo E. | |
| dc.contributor.author | Coba Salcedo, Milton Fabian | |
| dc.date.accessioned | 2021-12-09T23:42:03Z | |
| dc.date.available | 2021-12-09T23:42:03Z | |
| dc.date.issued | 2018 | |
| dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/1793 | |
| dc.description.abstract | In the present investigation, the effect of main parameters for the development of
parts in production such as feed rate and depth were evaluated, obtaining the machining costs depending on the characteristics of the material. The machining process used was that of turning in pieces with carbon steels and cast iron as the base material, varying the feed rate in a range between 0.2mm/tooth and 0.8mm/tooth and the depth between 1mm and 4mm allowing important parameters to be determined such as cutting speed and machine operating conditions to obtain a good final finish without affecting the surface of the piece and in production time required to optimize costs. | eng |
| dc.format.extent | 6 Páginas | spa |
| dc.format.mimetype | application/pdf | spa |
| dc.language.iso | eng | spa |
| dc.publisher | International Journal of ChemTech Research ISSN | spa |
| dc.relation.ispartof | International Journal of ChemTech Research ISSN: 2455-9555, 2018 vol:11 fasc: 09 págs: 231 - 236, DOI:10.20902/IJCTR.2018.110930 | |
| dc.rights | CODEN (USA): IJCRGG | eng |
| dc.source | https://sphinxsai.com/2018/ch_vol11_no9/ch02.htm | eng |
| dc.title | Evaluation of the machining of a batch of parts by the turning process in carbon steels and cast iron | eng |
| dc.type | Artículo de revista | spa |
| dcterms.references | M. Mia and N. R. Dhar, ―Optimization of surface roughness and cutting temperature in high-pressure coolant-assisted hard turning using Taguchi method,‖ Int. J. Adv. Manuf. Technol., vol. 88, no. 1–4, pp. 739–753, Jan. 2017. | spa |
| dcterms.references | M. Mia et al., ―Prediction and optimization of surface roughness in minimum quantity coolant lubrication applied turning of high hardness steel,‖ Meas. J. Int. Meas. Confed., vol. 118, no. August 2017, pp. 43–51, 2018. | spa |
| dcterms.references | G. Poulachon, A. Albert, M. Schluraff, and I. S. Jawahir, ―An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turning,‖ Int. J. Mach. Tools Manuf., vol. 45, no. 2, pp. 211–218, Feb. 2005. | spa |
| dcterms.references | N. R. Dhar and M. Kamruzzaman, ―Cutting temperature, tool wear, surface roughness and dimensional deviation in turning AISI-4037 steel under cryogenic condition,‖ Int. J. Mach. Tools Manuf., vol. 47, no. 5, pp. 754–759, Apr. 2007. | spa |
| dcterms.references | G. K. Dosbaeva, M. A. El Hakim, M. A. Shalaby, J. E. Krzanowski, and S. C. Veldhuis, ―Cutting temperature effect on PCBN and CVD coated carbide tools in hard turning of D2 tool steel,‖ Int. J. Refract. Met. Hard Mater., vol. 50, pp. 1–8, May 2015. | spa |
| dcterms.references | T. Tawakoli, M. J. Hadad, M. H. Sadeghi, A. Daneshi, S. Stöckert, and A. Rasifard, ―An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication— MQL grinding,‖ Int. J. Mach. Tools Manuf., vol. 49, no. 12–13, pp. 924–932, Oct. 2009. | spa |
| dcterms.references | P. Hoier, A. Malakizadi, P. Stuppa, S. Cedergren, and U. Klement, ―Microstructural characteristics of Alloy 718 and Waspaloy and their in fl uence on fl ank wear during turning,‖ Wear, vol. 400–401, no. February, pp. 184–193, 2018 | spa |
| dcterms.references | C. Lahiff, S. Gordon, and P. Phelan, ―PCBN tool wear modes and mechanisms in finish hard turning,‖ Robot. Comput. Integr. Manuf., vol. 23, no. 6, pp. 638–644, Dec. 2007. | spa |
| dcterms.references | R. M. Lazzarin and M. Noro, ―Energy efficiency opportunities in the production process of cast iron cast iron: An experience in Italy,‖ Appl. Therm. Eng., vol. 90, pp. 509–520, Nov. 2015. | spa |
| dcterms.references | N. Mardan and R. Klahr, ―Combining optimisation and simulation in an energy systems analysis of a Swedish iron foundry,‖ Energy, vol. 44, no. 1, pp. 410–419, 2012. | spa |
| dc.identifier.doi | https://doi.org/10.20902/IJCTR.2018.110930 | |
| dc.publisher.place | India | spa |
| dc.relation.citationedition | Vol. 11 No. 09 (2018) | spa |
| dc.relation.citationendpage | 236 | spa |
| dc.relation.citationissue | 09 (2018) | spa |
| dc.relation.citationstartpage | 231 | spa |
| dc.relation.citationvolume | 11 | spa |
| dc.relation.cites | "Evaluation of the machining of a batch of parts by the turning process in carbon steels and cast iron", International Journal of ChemTech Research ISSN, vol. 11, n.º 9, p. 6, 2015. | |
| dc.relation.ispartofjournal | International Journal of ChemTech Research | spa |
| dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
| dc.subject.proposal | carbon steels | eng |
| dc.subject.proposal | cast iron | eng |
| dc.subject.proposal | machining | eng |
| dc.subject.proposal | turning process | eng |
| dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
| dc.type.content | Text | spa |
| dc.type.driver | info:eu-repo/semantics/article | spa |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
| oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
| oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
| dc.type.version | info:eu-repo/semantics/publishedVersion | spa |
