Mostrar el registro sencillo del ítem
Modelo matemático de una cámara de combustión de una caldera pirotubular utilizando la herramienta matlab-simulink
Mathematical model of a combustion chamber of a pirotubular boiler using the matlab-simulink tool
dc.contributor.author | fabra rivera, andrea del pilar | |
dc.contributor.author | RODRIGUEZ JIMENEZ, FRANCYS MARCEL | |
dc.contributor.author | Bermudez Santaella, Jose Ricardo | |
dc.contributor.author | Campos Rubio, Juan C. | |
dc.date.accessioned | 2021-11-23T23:17:30Z | |
dc.date.available | 2021-11-23T23:17:30Z | |
dc.date.issued | 2020-09-16 | |
dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/1324 | |
dc.description.abstract | En este artículo se presenta la implementación del modelo matemático de la cámara de combustión de una caldera piro-tubular, por medio del planteamiento de los balances de masa, energía y estequiométrico. Estos balances fueron descritos por los componentes de entrada (aire y combustible) que se presentan en la zona de combustión, basados en el concepto de mantener la relación estequiométrica entre ellos, los cuales, fueron simulados a través de las herramientas computacionales como el ESS y Matlab®, con el fin de determinar el comportamiento de los gases de combustión dependiendo del tipo de reacción química presentada. Así mismo, fue determinado la cantidad de carbonos e hidrógenos que componen los combustibles de estudio (ACMP y Keroseno), igualmente los kmol/s que componen al aire, con el objetivo de analizar su oxidación y determinar la producción de y . Finalmente, se realizó la respectiva comparación analizando los valores de presión y temperatura en los tres tipos de combustión, estequiométrica, con presencia de inquemados y con exceso de aire. El planteamiento del modelo matemático fue aplicado para los dos tipos de combustibles de estudio. | spa |
dc.description.abstract | This article presents the implementation of the mathematical model of the combustion chamber of a pyro-tubular boiler, by means of the approach of mass, energy and stoichiometric balances. These balances were described by the input components (air and fuel) that are presented in the combustion zone, based on the concept of maintaining the stoichiometric relationship between them, which were simulated through the computational tools such as the ESS and Matlab®, in order to determine the behavior of combustion gases depending on the type of chemical reaction presented. Likewise, it was determined the amount of carbons and hydrogens that make up the study fuels (ACMP and kerosene), as well as the kmol / s that compose the air, with the objective of analyzing its oxidation and determining the production of [CO]_(2,) H_2 O. Finally, the respective comparison was made analyzing the values of pressure and temperature in the three types of combustion, stoichiometric, with presence of unburned and with excess air. The approach of the mathematical model was applied for the two types of study fuels. | eng |
dc.format.extent | 10 páginas | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | spa | spa |
dc.publisher | Revista Matéria | spa |
dc.relation.ispartof | Revista Matéria | |
dc.rights | Este es un artículo publicado en acceso abierto (Open Access) bajo la licencia Creative Commons Attribution, que permite su uso, distribución y reproducción en cualquier medio, sin restricciones siempre que el trabajo original sea debidamente citado. | eng |
dc.source | https://www.scielo.br/j/rmat/a/7gzCfJjQ4HGbBPNxFmHKNtQ/?lang=es# | spa |
dc.title | Modelo matemático de una cámara de combustión de una caldera pirotubular utilizando la herramienta matlab-simulink | spa |
dc.title | Mathematical model of a combustion chamber of a pirotubular boiler using the matlab-simulink tool | eng |
dc.type | Artículo de revista | spa |
dcterms.references | MARTÍNEZ, et al Análisis de un Software para Determinar el Combustible Óptimo para una Caldera. Revista Ciencia, Ingeniería y Desarrollo Tec Lerdo, pp. 1-6, 2018. | spa |
dcterms.references | KHAUSTOV, et al Computer-aided simulation of fire-tube boiler emergency operation. Applied Engineering, pp. 548-551, 2016. | spa |
dcterms.references | GARCIA, et al Análisis de Ruido en el Diseño y Construcción de una Cámara Semianecoica para Diagnóstico de Motores de Combustión Interna. Información Tecnológica, pp. 121-132, 2016. | spa |
dcterms.references | GÓMEZ, et al Numerical simulation of the combustion process of a pellet-drop-feedboiler. The Science and Technology of Fuel and Energy, pp. 987-999, 2016. | spa |
dcterms.references | RODRÍGUEZ, et al Metodología para la evaluación del proceso de co/combustión de biomasas a partir de diferentes tecnologías en una caldera Retal. Revista cientifica de la universidad de cienfuegos, pp. 295-302, 2019. | spa |
dcterms.references | KHAN, QAMAREEN. Analysis ofAdiabatic Flame Temperature for differentAlkane-AirMixtures using SimulinkModel. International Journal of Engineering Technology Science and Research, pp. 1202-1210, 2018. | spa |
dcterms.references | MOLANO, et al Efecto de la saturación de agua durante la ignición de un proceso de combustión in situ. Revista Ion, pp. 83-97, 2018. | spa |
dcterms.references | KAZAKH, et al Numerical Modeling of Pulverized Coal Combustion at Thermal Power Plant Boilers. Journal of Thermal Science, pp. 275-282, 2015. | spa |
dcterms.references | OBED, et al Analysis of blended fuel properties and engine performance withpalm biodieselediesel blended fuel. Renewable Energy, pp. 59-67, 2015. | spa |
dcterms.references | KOHLER, et al In situ high-temperature gas sensors: continuousmonitoring of the combustion quality of differentwood combustion systems and optimizationof combustion process. Journal od sensors and sensor system, pp. 161-167, 2018. | spa |
dcterms.references | SUNIL, et al Mathematical modeling, simulation and validation of a boiler drum:Some investigations. The International Journal Energy, pp. 312-325, 2017. | spa |
dcterms.references | BABU, ANAND. Effect of biodiesel-diesel-n-pentanol and biodiesel-diesel-n-hexanolblends on diesel engine emission and combustion characteristics. The International Journal Energy, pp. 761-776, 2017. | spa |
dcterms.references | CASTRO, et al. Universitat Politècnica de València Retrieved from Universitat Politècnica de València: https://riunet.upv.es/handle/10251/103843, Junio 11, 2018 | spa |
dcterms.references | GANGARAJU, et al Design and analysis of gas turbine combustion chamber for producer gas as working fuel. International Journal of Current Engineering and Technology, pp. 444-447, Septiembre, 2015. | spa |
dc.identifier.doi | https://doi.org/10.1590/S1517-707620200003.1112 | |
dc.publisher.place | Brasil | spa |
dc.relation.citationedition | Vol.25 No.3.(2020) | spa |
dc.relation.citationendpage | 10 | spa |
dc.relation.citationissue | 3(2020) | spa |
dc.relation.citationstartpage | 1 | spa |
dc.relation.citationvolume | 25 | spa |
dc.relation.cites | Rivera, A. D. P. F., Jiménez, F. M. R., Santaella, J. R. B., & Rubio, J. C. C. (2020). Modelo matemático de una cámara de combustión de una caldera pirotubular utilizando la herramienta matlab-simulink. Matéria (Rio de Janeiro), 25. | |
dc.relation.ispartofjournal | Revista Matéria | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.rights.creativecommons | Atribución 4.0 Internacional (CC BY 4.0) | spa |
dc.subject.proposal | modelo matemático | spa |
dc.subject.proposal | relación aire combustible | spa |
dc.subject.proposal | Simulink® | spa |
dc.subject.proposal | cámara de combustión | spa |
dc.subject.proposal | Mathematical model | eng |
dc.subject.proposal | relation air fuel | eng |
dc.subject.proposal | combustion chamber | eng |
dc.subject.proposal | system | eng |
dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
dc.type.content | Text | spa |
dc.type.driver | info:eu-repo/semantics/article | spa |
dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
dc.type.version | info:eu-repo/semantics/publishedVersion | spa |