Mostrar el registro sencillo del ítem

dc.contributor.authorRAMIREZ DELGADO, ROSA PATRICIA
dc.contributor.authorSanchez Molina, Jorge
dc.contributor.authorSarabia Guarin, Alejandra
dc.date.accessioned2021-11-18T15:30:39Z
dc.date.available2021-11-18T15:30:39Z
dc.date.issued2019-11-19
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/1083
dc.description.abstractFly ash obtained from coal combustion was used as a partial substitute of clay material for lightweight red ceramic floor tiles production by pressing. Raw materials were characterized by X-ray diffraction and X-ray fluorescence. The technique of molding by pressing was used for the manufacture of the prototypes, once firing, were evaluated their physical and mechanical properties (linear shrinkage, apparent density, water absorption, flexural strength). The results indicated that fly ash from the thermoelectric power plant at Termotasajero under the working conditions allow reduce the density of ceramic products with physic mechanical properties adequate for its use as ceramic tiles classified as BIIb and BIIIb.eng
dc.format.extent06 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherProduction of lightweight red ceramic floor tiles with addition of thermoelectric plant coal fly ash and its effect on physic mechanical propertiesspa
dc.relation.ispartofJournal of Physics: Conference Series
dc.rights© Copyright 2021 IOP Publishingeng
dc.sourcehttps://iopscience.iop.org/article/10.1088/1742-6596/1388/1/012017/metaspa
dc.titleProduction of lightweight red ceramic floor tiles with addition of thermoelectric plant coal fly ash and its effect on physic mechanical propertieseng
dc.typeArtículo de revistaspa
dcterms.referencesPrieto V, Jaca C and Ormazabal M 2017 Memoria Investig. Ing. 15 85-95spa
dcterms.referencesPark J, Sarkis J and Wu Z 2010 J. Cleaner. Prod. 18 1492-99spa
dcterms.referencesKarayannis V, Spiliotis X, Domopoulou A, Ntampegliotis K and Papapolymerou G 2015 Revista Romana de Materiale 45 358-63spa
dcterms.referencesSarabia A, Sánchez J and Leyva J 2017 Respuestas 22 6-15spa
dcterms.referencesRuiz J, Santos C, Cambronero L, Corpas F, Alfonso M and Moraño A 2000 Bol. Soc. Esp. Ceram. Vidr. 39 229-31spa
dcterms.referencesAhmaruzzaman M 2010 Prog. Energy Combust. Sci. 36 327-63spa
dcterms.referencesQuerol X, Moreno N, Umaña J, Alastuey A, Hernández E, López A and Plana F 2002 Int. J. Coal Geol. 50 413-23spa
dcterms.referencesYu J, Li X, Fleming D, Meng Z, Wang D and Tahmasebi A 2012 Energy Procedia 17 3-9spa
dcterms.referencesUPME 2018 Informe mensual de variables de generación y del mercado eléctrico colombiano: Marzo de 2018 (Bogotá: Sistema de Información Eléctrico Colombiano)spa
dcterms.referencesIyer R and Scott A 2001 Resour. Conserv. Recycl. 31 217-228spa
dcterms.referencesBlissett R and Rowson N 2012 Fuel 97 1-23spa
dcterms.referencesYao Z, Ji X, Sarker P, Tang J, Ge L, Xia M and Xi Y 2015 Earth Sci. Rev. 141 105-121spa
dcterms.referencesLuo Y, Ma S, Liu C, Zhao Z, Zheng S and Wang X 2017 J. Eur. Ceram. Soc. 37 1847-56spa
dcterms.referencesZimmer A and Bergmann C 2007 Waste Manage. 27 59-68spa
dcterms.referencesJi R, Zhang Z, Yan C, Zhu M and Li Z 2016 Constr. Build. Mater. 114 888-895spa
dcterms.referencesSokolar R and Smetanova L 2010 Ceram. Int. 36 215-21spa
dcterms.referencesKockal N 2012 Bol. Soc. Esp. Cerám. Vidr. 51 297-304spa
dcterms.referencesOlgun A, Erdogan Y, Ayhan Y and Zeybek B 2005 Ceram. Int. 31 153-8spa
dcterms.referencesWu X, Huo Z, Ren Q, Li H, Lin F and Wei T J. Alloys Compd. 702 442-48spa
dcterms.referencesLuo Y, Ma S, Zhao Z, Wang Z, Zheng S and Wang X 2017 Ceram. Int. 43 1-11spa
dcterms.referencesMartin L, Winnefeld F, Tschopp E, Müller C and Lothenbach B 2017 Cem. Concr. Res. 95 152-63spa
dcterms.referencesWang Q, Cui X, Wang J, Li S, Liv C and Dong Y 2017 Constr. Build. Mater. 138 35-44spa
dcterms.referencesPromateriales 2016 Cerámica en la construcción Consulted on: https://promateriales.com/ceramica-en-la-construccion/spa
dcterms.referencesSarabia A, Ramírez R and Sánchez J 2017 Congreso Internacional de Innovacion y Tendencias en Ingenieria (CONIITI) (Bogota) (Bogotá: Universidad Católica de Colombia)spa
dcterms.referencesInstituto Colombiano de Normas Técnicas y Certificación (ICONTEC) 1998 Ingeniería civil y arquitectura. Baldosas cerámicas. Parte 3: Método de ensayo para determinar la absorción de agua, porosidad aparente, densidad relativa aparente y densidad aparente, NTC 4321-3 (Colombia: Instituto Colombiano de Normas Técnicas y Certificación)spa
dcterms.referencesInstituto Colombiano de Normas Técnicas y Certificación (ICONTEC) 2015 Ingeninería civil y arquitectura. Baldosas cerámicas. Parte 4: Método de ensayo para determinar el módulo de rotura y la resistencia a la flexión, NTC 4321-4 (Colombia: Instituto Colombiano de Normas Técnicas y Certificación)spa
dcterms.referencesBernal I, Cabezas H, Espitia C, Mojica J and Quintero J 2003 Revista Acad. Colomb. Ci. Exact 27 569-78spa
dcterms.referencesSanchez J, Sarabia A and Alvarez D 2016 Respuestas 21 48-56spa
dcterms.referencesGazulla M, Sánchez E, Gonzales J and Orduña M 2014 Bol. Soc. Esp. Ceram. Vidr. 53 227-34spa
dcterms.referencesAmerican Society for Testing and Materials (ASTM) 2012 Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, ASTM C618 (West Conshohocken: American Society for Testing and Materials)spa
dcterms.referencesRodrígez G and Ortega L 2014 Ingenieria Investigacion y Desarrollo 4 14-19spa
dcterms.referencesGutierrez O, Pineda Y and Vera E 2015 Revista Metalurgica 51 2-11spa
dcterms.referencesNormas ICONTEC: Instituto Colombiano de Normas Técnicas y Certificación (ICONTEC) 2015 Baldosas cerámicas. Definiciones, clasificación, características y rotulado, NTC 919 (Colombia: Instituto Colombiano de Normas Técnicas y Certificación)spa
dc.identifier.doihttps://doi.org/10.1088/1742-6596/1388/1/012017
dc.publisher.placeReino Unidospa
dc.relation.citationeditionVol.1388 No.1.(2019)spa
dc.relation.citationendpage6spa
dc.relation.citationissue1(2019)spa
dc.relation.citationstartpage1spa
dc.relation.citationvolume1388spa
dc.relation.citesSarabia, A., Sanchez, J., & Ramírez, R. P. (2019, November). Production of lightweight red ceramic floor tiles with addition of thermoelectric plant coal fly ash and its effect on physic mechanical properties. In Journal of Physics: Conference Series (Vol. 1388, No. 1, p. 012017). IOP Publishing.
dc.relation.ispartofjournalJournal of Physics: Conference Seriesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem