dc.date.accessioned | 2022-11-09T15:38:31Z | |
dc.date.available | 2022-10-27 | |
dc.date.available | 2022-11-09T15:38:31Z | |
dc.date.issued | 2022-10-27 | |
dc.identifier.uri | https://repositorio.ufps.edu.co/handle/ufps/6516 | |
dc.description.abstract | Abstract
We will address the role that low carbon fuels (not strictly “carbon
free” fuels, but those with low carbon intensity) can and should play
in reducing greenhouse gas emissions. To some, it seems a foregone
conclusion that the days of the internal combustion engine are
nearing an end, and that the fastest path to “zero carbon emissions”
is through adoption of electric vehicles. But bringing down fossil
carbon emissions immediately can yield tremendous improvements
with regard to the climate crisis, in contrast with waiting for electric
vehicles to penetrate the market, and electricity production to be
deeply de-carbonized. Widespread and immediate adoption of
low carbon intensity renewable fuels can provide dramatic carbon
intensity reductions, overnight, when used in the vehicles we drive
today. But both the pursuit of electrification of the transportation
sector and adoption of low carbon fuels runs into a major practical
challenge – achieving major reductions in reducing fossil carbon
emissions at scale. Replacing 20 million barrels a day of petroleum
presents a daunting barrier to addressing the climate crisis. We
will take a realistic look at these questions, and recommend a path
forward that uses both strategies, based on life cycle analysis and
experimental studies with engines and vehicles. | eng |
dc.description.tableofcontents | Contenido
Preface 8
General Committee 9
Academic Committee 10
Scientific Committee 11
Invited reviewers and subreviewers 13
English for Engineers Team 14
Design, Logistic and Assembly Congress Team 14
Key note speakers 15
ENERGY
Reducing GHG Emissions via Low Carbon Fuels: Challenges and Opportunities 17
Comparison of the performance of hydrofoils used in vertical-axis hydrokinetic
turbines (VAHT) using computational fluid dynamics 21
Computational fluid dynamics modelling of an oscillating water column air
chamber
Hydrodynamic characterization of turbomachines focused on pumps as turbines 36
Experimental characterization of hydrokinetic turbines 43
Design and implementation of an on-board laboratory for dual fuel strategies
evaluation in real-driving conditions in Colombia 51
Implementation of a port-fuel injected dual fuel engine in a commercial vehicle
and evaluation of diesel substitution for transient operation in Medellín-Colombia.
Replication of results: CFD modeling and experimental validation of an alkaline
water electrolysis cell for Hydrogen production 68
Numerical Analysis of Landfill Biodegradation 76
Kinetic model of anaerobic digestion based on the bioenergetics of microorganisms
Improving the Stability of Methylammonium Lead Iodide Perovskite by Propionic
Acid Doping 92
Representative evaluation methodology of graphene transfer processes applied
to inverted perovskite solar cell 99
Hybrid perovskite (Cs1-xDMA x) Pb(Br1-xI x)3 solar cells with improved stability 106
INFRASTRUCTURE
Insights and research in materials used to decrease noise pollution: developments
for Colombia 115
Hybrid dust of construction and demolition waste in the compressive strength of
hydraulic concrete mixtures 122
Vulnerability assessment by geographic information systems in buildings of the
historic center of Tunja 131
Analysis of the geographic coverage of urban green areas and its relationship with
the socioeconomic conditions of the population in Tunja, Boyacá 139
Application of isothermal heat treatments in AISI A2 tool steel to improve life of
cold working tools 146
Carbo-austempering of high silicon steels: an innovative alternative for surface
heat treatment 154
Austenite formation in ductile iron alloyed with copper and nickel 161
Nanobainitic cast steels: Scientific advances for the industrial sector 169
Evaluation of the anticorrosive properties of a paint using Buddleja incana extract
as a corrosion inhibitor 176
Analysis of mechanical energy transfer and dissipation in natural rubber – recycled
EPDM compounds with potential use in piezoelectric tile contact surfaces 184
Evaluation of the erosion behavior of UNS C52400 bronze for potential application
in 1 KW hydrokinetic turbine blades 191
Thermally sprayed hydroxyapatitebased coatings: advantages and challenges 198
Aglomeration of al2o3 nanometric and submicrometric particles by spray drying
for their use as feedstock in thermal spraying coatings 207
Flame spraying as alternative for sintering spray dried AT-13 granules 215
Effect of the binder type on the yield of 3-YSZ nanoparticles pelletized to their use
as feedstock in thermally sprayed coatings 223
Characterization of YSZ powders obtained by ball mill grinding with possible
application for TBCs thermal barrier systems 230
Arc sprayed coatings on infrastructure elements to protect them from corrosion
and abrasion 238
Axisymmetric modeling and CFD simulation of cold projection for ceramic particles
of HAp (Hydroxyapatite) 247
Study of thermal spray parameters through numerical simulations for ceramic
powders 255
Fabrication of Hydroxyapatite/ Polyester composite coatings by high velocity
oxygen fuel spray (HVOF) 264
Improvement of the structural quality of nicrbsife coatings elaborated by oxyacetylene
flame spraying from control of the main process parameters 269
Thermal projection by flame, as a way to obtain ceramic coatings resistant to wear
at high temperatures 278
Assessment of delaminated areas in Thermal Barrier Coating subjected to Thermal
Cycling by Infrared Thermography 286
VITAL ENGINEERING
Variation of organic matter and aquatic macroinvertebrates associated with
Eichhornia crassipes roots with flood pulse. 296
Capture of particulate matter of 1, 2.5 and 10 microns, with the use of microalgae
in outdoor photobioreactors 304
Analysis of Eichhornia crassipes root-associated protists and their relationship to
the flood pulse 311
Social and environmental contributions to floriculture in the hydrangea sector
through a life cycle assessment approach 319
Car fleet growth model in Medellín city: Exploratory review of the implementation
of public policies for the transportation demand management based on the
restriction due to the use of plates and scrapping
325
Emissions of criteria pollutants and greenhouse gasses from mobile sources in
three main streets of an intermediate city in colombia. 332
Comparison of extreme precipitation and temperature events between El Niño
Southern Oscillation and neutral years in the Colombian Andes 340
Life cycle analysis of a perovskite photovoltaic mini-module developed in Colombia
with a PIN meso-superstructured configuration 348
Mathematical model for the tactical planning of the supply chain of supplementary
cementitious materials 355
A Mixed Integer Linear Programming Model for Facility Location in Disaster Relief
Operations Using Georeferenced Data 364
CATESID: Software for identifying alluvial gold mining areas, their characteristic
coverages, and their multitemporal analysis 374
Customized Ti6Al4V implants by EBM: design, manufacturing and surface
treatments 381
Numerical study of microwave hyperthermia for the treatment of breast cancer 389
Automated semantic annotator for information retrieval, based on biomedical
ontologies 396
Biotribological behavior of Ti6Al4V alloy fabricated by EBM and subsequently
anodized 404
Bioengineering of Structured Lipids Microencapsulated as an Alternative of
Healthy Oil 411
Analysis of Sustainability of Nopol Catalytic Production Using NonWood Forestry
Biomass 420
Transformation of monoterpenes through one-pot pathways over heterogeneous
catalysts 428
4.0 TECHNOLOGY
Q-means clustering coherent noise tolerance analysis 437
Towards Anomaly Classification on IIoT Edge Devices Using Statistical Variable
Selection 444
Method for analyzing morphological traits of chrysanthemum cuttings based on
computer vision 451
Image characterization of coral reefs using computer vision techniques and
convolution neural networks (CNNs) 459
Effect of pressure and time on green compaction of UHMWPE powder by uniaxial
pressure 467
Implementation of a graphene nanocompound to reduce energy consumption as
measured with a current sensor using real-time data analysis through the internet 474
Graphene based Erbium doped fiber laser’s design guidelines for ultra short pulse
generation 481
Evaluation of the application of suspensions of iron oxide magnetic nanoparticles
functionalized with quaternized chitosan on maize seeds 488
Mechanical characterization of bioinspired composite materials produced via
additive manufacturing 495
Design and Construction of a Low-Cost Test Bench for Thrust Vector Control
Systems in Experimental Rockets 503
Prototype of a 3D indoor anemometer based on MEMS thermopile sensors 511
Design and improvement of a wireless energy harvesting rectenna operating at
2.4 GHz 519
Key enablers: measuring digital transformation in companies located in ocaña
norte de santander 526
Selecting a Data Platform to Support the Development of Applications Oriented to
Improve Citizen Security 533
Additive manufacturing: an opportunity for innovation and sustainability 541 | spa |
dc.format.extent | 1-551 | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | eng | spa |
dc.publisher | Fondo Editorial EIA | spa |
dc.rights.uri | https://creativecommons.org/licenses/by-nc/4.0/ | spa |
dc.title | Engineering for Transformation | eng |
dc.type | Documento de Conferencia | spa |
dcterms.audience | Estudiantes, Profesores, Comunidad científica colombiana, etc. | spa |
dc.description.notes | General Committee
Jesús Francisco Vargas Bonilla
Dean, Facultad de Ingeniería, Universidad de Antioquia
Tatiana Marcela Gómez Bustamante
EXPOIngeniería Director
Mauricio Andrés Correa-Ochoa
CESET Director, Engineering Faculty, Universidad de Antioquia
Juan Diego Velez
DRAI Director, Engineering Faculty, Universidad de Antioquia
Lyda Janeth Contreras Olivares
Logistic, design and assembly Director, International Congress EXPOIngeniería 2022
Víctor Hugo Zapata Madrigal
Representative of “Plaza Mayor”
Juan Esteban Taborda Grisales
Representative of “IMAGROUP”
Víctor Manuel Gámez Fonseca
Representative of “CPM Logística” | spa |
dc.description.notes | Contreras Olivares
Logistic, design and assembly Director, International Congress EXPOIngeniería 2022
Víctor Hugo Zapata Madrigal
Representative of “Plaza Mayor”
Juan Esteban Taborda Grisales
Representative of “IMAGROUP”
Víctor Manuel Gámez Fonseca
Representative of “CPM Logística”
10 Engineering for Transformation
Academic Committee
Sergio Cipriano Agudelo
Vice-Dean, Engineering School, Universidad de Antioquia
Mauricio Andrés Correa-Ochoa
CESET Director
Tatiana Marcela Gómez Bustamante
EXPOIngeniería Director
Ricardo Aristizábal-Sierra
Sara Cristina Vieira Agudelo
Research Director, Engineering School, Universidad de Antioquia
Maryory Astrid Gómez
“Facultad de Ingeniería UdeA” Journal, Director. Professor, Researcher
Andrea Rodríguez Sánchez
International Congress EXPOIngeniería 2022, Administrative support
Lina Herrera Moncada
Communicator International Congress EXPOEngineering
Astrid Marcela Mira Hincapié
Coordinator, Continuing Education and Events, Engineering Faculty,
Universidad de Antioquia | spa |
dc.description.notes | Scientific Committee
Aida Luz Villa
Universidad de Antioquia
Colombia
Ainhoa Rubio Clemente
Universidad de Antioquia
Colombia
Ana María Cárdenas
Universidad de Antioquia
Colombia
Ana María Pérez Ceballos
Universidad Industrial de Santander
Colombia
Ángela Rendón
Universidad de Antioquia
Colombia
Carlos Serna Giraldo
Universidad UNIRB
Brazil
Carlos Alberto Palacio
Universidad de Antioquia
Colombia
Carlos Rivero
Universidad de Antioquia
Colombia
Celia Malfatti
Universidad de Antioquia
Brazil
Claudia Patricia Serna
Universidad de Antioquia
Colombia
Daniel Estiben Ramírez
Universidad de Antioquia
Colombia
Danny Múnera
Universidad de Antioquia
Colombia
Diana Catalina Rodríguez
Universidad de Antioquia
Colombia
Edison Gustavo Cueva
Universida de Brasília
Brasil
Edwin Chica
Universidad de Antioquia
Colombia
Esperanza López Gómez
Universidad de Antioquia
Colombia
Fernando Juan Beltran
Universidad de Extremadura
Spain
Gianpaolo Vitale
National Research Council of Italy
Italy
Henry Colorado
Universidad de Antioquia
Colombia
Javier Rivero
Universidad de Antioquia
Colombia
Jhon Fredy Vélez
CARTIF Technological Center
Spain
John Ramiro Agudelo
Universidad de Antioquia
Colombia
Juan Guillermo Villegas
Universidad de Antioquia
Colombia
Juan Marcelo Rojas
Universidad de Antioquia
Colombia
Juan Sebastián Botero
Institución Universitaria ITM
Colombia
Juliana Uribe
Universidad de Antioquia
Colombia
Lina Berrouet
Universidad de Antioquia
Colombia
Luis Alejandro Fletscher
Universidad de Antioquia
Colombia
María Esperanza López
Universidad de Antioquia
Colombia
María Teresa Hernández
Ministry for The Ecological Transition
and the Demographic Challenge
Spain
Maryory Astrid Gómez
Universidad de Antioquia
Colombia
Melissa Barrera Durango
Universidad de Antioquia
Colombia
Nataly Carolina Rosero
Institute of Ceramic and Glass
Spain
Néstor Aguirre
Universidad de Antioquia
Colombia
Nuria Vela de Oro
Universidad Católica de Murcia
Spain
Pablo Andrés Maya
Universidad de Antioquia
Colombia
Rafael Orozco
Universidad de Antioquia
Colombia
Raquel Lebrero Fernández
University of Valladolid
Spain
Valeria Chávez Cerón
UNAM
Mexico | spa |
dc.description.notes | Invited reviewers and subreviewers
Sara Aguilar
Universidad de Antioquia
Claudia Aldana
Universidad de Antioquia
Luis Castaño-Londoño
Institución Universitaria ITM
Claudia Elena Echeverri
Universidad EIA
Carmiña Gartner
Universidad de Antioquia
Diego Hernán Giraldo
Universidad de Antioquia
Cristian Guarnizo-Lemus
Institución Universitaria ITM
Francisco López
Institución Universitaria ITM
David Márquez-Viloria
Institución Universitaria ITM
Luis Morantes-Guzmán
Institución Universitaria ITM
Juan Guillermo Muñoz
Universidad Nacional
Gustavo Patiño
Universidad de Antioquia
Edward Restrepo
Universidad de Antioquia
Erick Reyes
Institución Universitaria ITM
Oscar Ríos-Diez
Universidad de Antioquia
Daniel Tobón
Universidad de Antioquia
Juliana Valencia-Aguirre
Institución Universitaria ITM
Fabio Vargas
Universidad de Antioquia
Juan Camilo Villegas
Universidad de Antioquia
Juan Felipe Montoya Arango
Universidad de Antioquia
Franky Bedoya
EPFL, Suiza
Claudia Patricia Ossa Orozco
Universidad de Antioquia
Jonathan Gallego
Universidad de Antioquia
Fabián Castaño
Universidad de Antioquia
Ana María Torres López
Universidad de Antioquia
Isabel Cristina Muñoz Ortega
Universidad de Antioquia | spa |
dc.contributor.corporatename | Universidad de Antioquia | spa |
dc.contributor.corporatename | Colecciòn EUREKA | spa |
dc.contributor.corporatename | FONDO EDITORIAL EIA | spa |
dc.contributor.corporatename | Gobernaciòn de Antioquia | spa |
dc.publisher.place | Medellìn Antioquìa | spa |
dc.relation.conferencedate | 27-28-29 Octubre de 2022 | spa |
dc.relation.conferenceplace | Medellìn Antioquìa | spa |
dc.relation.ispartofconference | Expo Ingenieria | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.rights.creativecommons | Atribución-NoComercial 4.0 Internacional (CC BY-NC 4.0) | spa |
dc.subject.lemb | ENERGY | |
dc.subject.lemb | INFRASTRUCTURE | |
dc.subject.lemb | 4.0 TECHNOLOGY | |
dc.subject.lemb | VITAL ENGINEERING | |
dc.type.coar | http://purl.org/coar/resource_type/c_8544 | spa |
dc.type.content | Event | spa |
dc.type.driver | info:eu-repo/semantics/conferenceObject | spa |
dc.type.redcol | https://purl.org/redcol/resource_type/EC | spa |
oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
dc.type.version | info:eu-repo/semantics/publishedVersion | spa |