Listar por tema "Lobe Diagram"

Chatter in the machine tools represents one of the biggest problems due to the instability in the machining process, breakage of the tool and accelerated wear of the tool and spindle or machine components in the metal ...

The chattering in the machine tools is a phenomenon that causes instability in the machining process, surface finish with high roughness, also produces excessive and accelerated wear on the tool in the metal cutting ...

Influence of natural frequency on stability during milling of inconel and udimet 500
...
ACEVEDO PENALOZA, CARLOS | 2018-09-18

Chatter in the machine tools represents one of the biggest problems due to the instability in the machining process, breakage of the tool and accelerated wear of the tool and spindle or machine components in the metal cutting processes, such as turning, milling, boring, drilling, etc. Which translates into a poor-quality surface finish, this phenomenon consists of self-excited vibrations that are produced and maintained due to shear forces, the purpose of this article is to predict the optimal points of operation in the milling process for Ni-based Inconel and make a comparison with Ni-based Udimet 500 through observation supported by a graphical and analytical tool to generate stability lobe diagrams, a code was developed in the MATLAB® software capable of generating stability lobe diagrams for the milling operation that provides optimal operating points to avoid tool vibration, thus improving chip removal rates and increasing productivity.

LEER
Regenerative reassembly phenomenon in the turning process machining the A1020 steel
...
Coba Salcedo, Milton Fabian | 2018-08-01

The chattering in the machine tools is a phenomenon that causes instability in the machining process, surface finish with high roughness, also produces excessive and accelerated wear on the tool in the metal cutting processes, this phenomenon consists of self-excited vibrations which are produced and maintained due to the cutting forces, the purpose of this article is to analyze regenerative chatter and predict the optimal points of operation in the turning process for 1020 carbon steel by developing analytical methods for generating stability lobe diagrams. To achieve this objective, the methods proposed by Altinas and Budak to stabilize the self-excited vibrations in the turning process applied to the orthogonal cut were studied in detail. These methods are widely accepted within the community of researchers and specialists in the field, thanks to the excellent results obtained in practice. Once the models studied were compressed, a computational algorithm was developed with the help of the MATLAB® software that was able to generate stability lobe diagrams for the turning operation in order to find the optimal points of operation so that there was no chatter, thus improving the material removal rate and increasing productivity

LEER

Repositorio Digital

Listar por tema "Lobe Diagram"

Influence of natural frequency on stability during milling of inconel and udimet 500

Regenerative reassembly phenomenon in the turning process machining the A1020 steel

Envíos recientes

Influence of natural frequency on stability during milling of inconel and udimet 500

Regenerative reassembly phenomenon in the turning process machining the A1020 steel

Portales Institucionales

Enlaces de Interés

Contactos

Listar por tema "Lobe Diagram"

Influence of natural frequency on stability during milling of inconel and udimet 500 ﻿

Regenerative reassembly phenomenon in the turning process machining the A1020 steel ﻿

Envíos recientes

Influence of natural frequency on stability during milling of inconel and udimet 500

Regenerative reassembly phenomenon in the turning process machining the A1020 steel

Portales Institucionales

Influence of natural frequency on stability during milling of inconel and udimet 500

Regenerative reassembly phenomenon in the turning process machining the A1020 steel