@ARTICLE{Ace_A c_2018,
author = "Acevedo Peñaloza, Carlos Humberto - Valencia, Guillermo - Coba Salcedo, Milton Fabian",
title = "A comparative study of the cutting parameter in milling process under different material",
abstract = "In the present study, the incidence of the variation in feed rate per tooth and depth
of cut for SAE 4340 alloy steel and SAE J431 steel castings was analysed and in
which material this variation is most noticeable. For this purpose, the machining
process studied was milling. This is a machining operation in which a workpiece
is passed in front of a rotating cylindrical tool with multiple cutting edges. For this
study, the feed rate per tooth and depth of cut were varied by 4 values each. The
feed rate ranged from 0.002 mm to 0.008 mm and the depth of 2 mm to 8 mm
found that for both parameter variations cutting speeds always decrease with
increasing both feed per tooth and depth of cut and that feed per tooth and depth
of cut significantly affect process costs.",
year = 2018,
publisher = "Contemporary Engineering Sciences",
url = "https://repositorio.ufps.edu.co/handle/ufps/603",
}