Search
Now showing items 21-30 of 39
Design and simulation of a mechanical system for the machining of parts and printing in 3D (x, y, z)
(Revista UIS Ingenierías, 2020-07-30)
The design and simulation of a multifunctional system for the machining of mechanical parts and printing in 3D (x, y,
z) using CAD software Solid works, was used to determine the static behavior of the system with the ...
Wear and corrosion behaviour of Al2O3-TiO2 coatings produced by flame thermal projection
(Journal of Physics: Conference Series, 2017-12-29)
Evaluated the wear resistance and the coatings corrosion behaviour of Al2O3-TiO2 prepared by thermal spraying by flame on AISI 1020 carbon steel substrates, previously coated with an alloy base Ni. For this purpose, were ...
Elaboración y caracterización de recubimientps de polvos de ZnSCu y resinas de poliester sobre sustratos cerámicos de arcilla roja, para el diseño de fachadas y revestimientos arquitectónicos fosforescentes
(Bistua Revista De La Facultad De Ciencias Basicas, 2018)
En este estudio se elaboran y caracterizan recubrimientos de polvos ZnSCu y resinas de poliéster termoestables sobre sustratos cerámicos de arcilla roja, para el diseño de fachadas y revestimientos arquitectónicos ...
Elaborar y caracterizar pastas cementantes fosforescentes a base de geopolímeros dopados con aluminatos de estroncio para aplicaciones ambientales
(Universidad Francisco de Paula Santander, 2021-08-25)
Dentro de las técnicas de tratamiento de aguas y aires, existe la fotocatálisis o fotoelectrocatalisis, donde el principio físico es la interacción de la radiación con la materia, utilizándose la radiación UV proveniente ...
Optimization of the parameters for obtaining zirconiaalumina coatings, made by flame spraying from results of numerical simulation
(Journal of Physics: Conference Series, 2017-12-29)
The K-Sommerfeld values (K) and the melting percentage (% F) obtained by numerical simulation using the Jets et Poudres software were used to find the projection parameters of zirconia-alumina coatings by thermal spraying ...
Obtaining and characterization of nanostructured coatings of zirconiaalumina- ceria by thermal spray flame
(Journal of Physics: Conference Series, 2019-11-19)
Zirconia, alumina and ceria powders were agglomerated, by granulator disk, to be used as raw material in the manufacture of coatings on red clay substrates by flame spray. Three mixtures of different compositions were made ...
Modelling the effect of temperature on the physical and mechanical properties of ceramic composites filled with foundry sand waste
(Journal of Physics: Conference Series, 2019-11-29)
The aim of this research is to describe the temperature effect on the water absorption, linear shrinkage, density and compressive strength of ceramic composites produced by mixing clay with additions of foundry sand waste ...
Optimization of the Tensile Properties of Polymeric Matrix Composites Reinforced with Magnetite Particles by Experimental Design
(TecnoLógicas, 2020-05-15)
A full-factorial 33 experiment was used in this study to determine the optimal values of the tensile properties of three composite materials manufactured based on three polymeric resins: Derakane Momentum epoxy vinyl ester ...
Porous covering compound of clay matrix and coal ashes
(Contemporary Engineering Sciences, 2018-11-05)
Here are presented the elaboration and characterization of a composite material with
an atomized ceramic paste and flying ashes product of the coal combustion. The
samples consist of prismatic tiles of 10x5x1 cm, formed ...
Design and manufacture of the cooling system of JUPITER reactor
(Journal of Physics: Conference Series, 2019-02-25)
The experimental investigations carried out in the Plasma laboratory of the Universidad Industrial de Santander, on superficial modification of metallic materials by hybrid discharges of high-voltage and electric arc at ...
