Listar Tecnología Cerámica – GITEC por título
Mostrando ítems 7-26 de 93
-
Caracterización Anticorrosiva y de Biocompatibilidad en Recubrimientos Silicio-Titanio-Zirconio Sintetizados Vía Solgel y Depositados sobre Sustratos 316L
(Informacion TecnologicaSantiago de Chile , Chile, 2018-02)Se sintetizaron, los sistemas ternarios [Si/Ti/Zr: 10/70/20] y [Si/Ti/Zr: 10/20/70] vía sol-gel y se aplicaron sobre sustratos de acero inoxidable 316L mediante la técnica de inmersión. En los recubrimientos obtenidos se ... -
Caracterización de cerámicos inmersos en soluciones del sistema sio2 – tio2 – zro2 sintetizadas por el método sol-gel
(Revista UIS IngenieríasColombia, 2017-05-30)Se presentan los resultados de la caracterización físico-cerámica, microquímica y estructural de muestras cerámicas de arcilla roja inmersas en soluciones de SiO2 – TiO2 – ZrO2 obtenidas por el método Sol-Gel utilizando ... -
Caracterización de los residuos de la cosecha del plátano harton para un potencial uso industrial
(Aibi revista de investigación, administración e ingenieríaColombia, 2020-11-30)La presente investigación caracterizó los residuos de la cosecha de plátano (Musa Paradisiaca Spp) que se producen en la vereda la Alejandra, municipio del Zulia, Norte de Santander, Colombia. El objetivo del estudio es ... -
Caracterización térmica y técnica del ladrillo multiperforado a nivel de laboratorio
(RespuestasColombia, 2020-01-01)The ceramics industry in Norte de Santander is recognized for the quality of the raw material that the products offer. However, the guild has limited itself to the mass production of units to satisfy the construction market, ... -
Características de las materias primas usadas por las empresas del sector cerámico del área metropolitana de Cúcuta (Colombia)
(Boletin de la Sociedad Española de Ceramica y vidrio, 2018-12)El área metropolitana de Cúcuta (Colombia) se caracteriza por contar con un conglomerado de empresas dedicadas a la fabricación de materiales cerámicos de construcción. La zona de influencia es rica en materiales arcillosos, ... -
Cámaras de aire ventiladas en un producto cerámico tradicional para envolventes de mampostería con enfriamiento pasivo
(Mundo FescColombia, 2020-01-01)Los productos cerámicos en la arquitectura presentan una oportunidad de desarrollo en soluciones constructivas capaces de mitigar las cargas térmicas en la envolvente de la edificación, el presente trabajo parte del reto ... -
Cenizas Volantes de Termoeléctrica como Materia Prima para la Fabricación de Materiales Cerámicos de Construcción: Efecto de la Temperatura de Cocción sobre el Material
(Informacion Tecnologica, 2019-02)Se empleó ceniza volante de una central termoeléctrica, como sustituto parcial de material arcilloso, para la elaboración de cerámicos de construcción. Las probetas se realizaron con sustituciones del 5, 10, 15 y 20% (peso), ... -
Characteristics of refractory bricks used in the coke production kilns in Colombia
(Reino Unido, 2021-06-04)A study has been carried out on the main physicochemical characteristics of the refractory bricks that are currently used in traditional coke-making kilns in Colombia. Two classes of material (brick) used in this industry ... -
Characterization of bismuth-silicate soles
(Journal of Physics: Conference SeriesInglaterra, 2019-11-29)The bismuth silicate compound was synthesized by the sol-gel method from bismuth nitrate pentahydrate and tetraethoxysilane, as precursors. The sol-gel method is attractive because the processes for obtaining oxides are ... -
Characterization of clay material and rice husk from northeast Colombia
(Rasayan Journal of ChemistryIndia, 2021-01)This research was to study materials from the region to use them industrially applying the circular economy concept. Clay Material and Rice Husk were evaluated in the manufacture of ceramic products. X-ray Diffraction and ... -
Characterization of the anticorrosive properties in bismuth-titanate films obtained by the sol-gel method
(Journal of Physics: Conference SeriesInglaterra, 2019-11-29)Sol-gel synthesis has been used since 1950 to prepare oxides. The method is attractive because the processes of obtaining the oxides are developed at room temperature; products with high purity and homogeneity are obtained, ... -
Characterization of the physical-mechanical and thermal behavior of a clay building unit designed with thermo-insulating attributes and a coffee cisco organic additive
(Journal of Physics: Conference SeriesReino Unido, 2019-11-29)This research is articulated from the clay framework as material wealth of the region of Norte de Santander, Colombia, and seeks to structure attributes of passive thermal cooling in a ceramic piece for low cost masonry ... -
Characterization of the tribological properties of bismuth-titanate coatings synthesized by sol-gel on 316L stainless steel substrates
(Tribology in IndustryBelgrado , Serbia, 2019)The objective of this investigation was to obtain ceramic coatings of bismuth titanate by Sol-gel synthesis on 316L stainless steel substrates using bismuth nitrate pentahydrate (III) and titanium tetrabutoxide as precursors. ... -
Coffee husk as feldspar substitute in the manufacture of enameled ceramic tile
(Ciencia e Ingeniería NeogranadinaBogota , Colombia, 2020-12-09)This study researches the effect of adding coffee husk (ch) and coffee husk ash (cha) as partial feldspar substitutes to the manufacture of enameled ceramic tiles. Clays and other paste additives were characterized using ... -
Comparative evaluation of the physical, mechanical and thermal properties of traditional H10 and H15 red clay blocks manufactured by the ceramic industry from San José de Cúcuta, Colombia
(Journal of Physics: Conference SeriesReino Unido, 2019-11-19)The traditional blocks of baked clay represent 15% of the total production of the ceramics cluster in the Norte de Santander region, with a product typology whose dimensions, shape, weight and price are the most demanded ... -
Comparative thermal analysis of extruded ceramic products between multi perforated brick and modified bricks in cells distribution
(Journal of Physics: Conference SeriesReino Unido, 2019-11-29)The demand for cooling and heating systems to adapt spaces is a critical environmental problem due to the high energy consumption required for its operation. For this reason, the offer of products for architectural facades ... -
“Una comunidad, Un Producto” Fortalecimiento del Sector Cerámico Artesanal de Cúcuta en la construcción de su producto identitario
(Universidad Francisco de Paula SantanderCúcuta, Norte de Santander, 2020-02-02)El proyecto busca fortalecer a las unidades productivas artesanales de la cerámica de Cúcuta y su área metropolitana, mediante el mejoramiento de las etapas del proceso productivo, a través de las siguientes líneas de ... -
Consumption of energy in the manufacturing of ceramic bricks in the metropolitan area of Cúcuta, Colombia
(Journal of Physics: Conference SeriesInglaterra, 2018-12-07)This research determined the consumption of electrical and thermal energy in the manufacturing of ceramic bricks in the metropolitan area of Cúcuta, city located in Colombia, South America. Three bricks manufacturers were ... -
Determination of expandability clay from San José de Cucuta metropolitan area, by varying calcination temperature and time
(Journal of Physics: Conference SeriesReino Unido, 2019-11-19)In this article, the volumetric change of the clay granules and sewage sludge (technological nutrient), San José de Cúcuta metropolitan area raw materials, when calcined at different temperatures and different burning times ... -
Determination of expandability clay from San José de Cúcuta metropolitan area, by adding different percentages of sewage sludge
(Journal of Physics: Conference SeriesReino Unido, 2019-11-19)This article shows the research carried out on clay from the San José de Cúcuta metropolitan area, Colombia, to which was added several percentages of a wastewater sludge, which is called as a technological nutrient. The ...