Mostrar el registro sencillo del ítem
Study of the piston secondary movement on the tribological performance of a single cylinder low-displacement diesel engine
| dc.contributor.author | Duarte Forero, Jorge | |
| dc.contributor.author | Valencia, Guillermo | |
| dc.contributor.author | PALACIOS ALVARADO, WLAMYR | |
| dc.date.accessioned | 2021-11-08T15:32:09Z | |
| dc.date.available | 2021-11-08T15:32:09Z | |
| dc.date.issued | 2020-10-30 | |
| dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/750 | |
| dc.description.abstract | The present study aims to analyze the secondary movement of the piston considering the deformations present in the piston skirt, the hydrodynamic lubrication, and the effects of the clearances in the connecting rod bearings. The analysis of the piston movement is performed by developing a mathematical model, which was used to evaluate the dynamic characteristics of the piston movement, the slap force on the piston skirt, the effect of the secondary piston movement on the connecting rod, and the influence of clearances in the connecting rod bearings and in the piston. For the study, the geometric of the crankshaft-connecting rod–piston system of a single-cylinder diesel engine is taken as a reference. The deformation model of the piston was carried out by means of a symmetric finite element model (FEM), which was integrated into the mathematical model of the piston. MATLAB® software (The MathWorks Inc., Natick, MA, USA) is used for the development of model simulations. The obtained results show that during the combustion cycle, there are six changes of direction in the secondary movement of the piston with lateral and angular velocities that can reach a magnitude of 0.13 m/s and 4 rad/s. The lateral and angular movement of the piston during its travel causes the appearance of impacts on the piston skirt with the cylinder liner, which produces an increase of approximately 500 N in the hydrodynamic forces in the connecting rod bearings. The force analysis shows that the range of the maximum magnitudes of these forces is between 1900 N and 3480 N. The increase in clearance between the cylinder liner and the piston skirt (Cpc) causes a greater lateral displacement and an increase in the angle of inclination of the piston. Analysis of the change in connecting rod bearing clearance shows that there are critical values in relation to clearance Cpc. The model presented allows us to analyze the different characteristics of the secondary movement of the piston, which involve the interaction between the piston skirt and the cylinder liner. Additionally, the influence of this movement on the connecting rod bearings is considered. The foregoing can be used as an analysis tool for the study of designs and/or modifications in the engine in such a way that greater durability of the components, reductions in acoustic emissions, and reduction in friction losses are achieved. View Full-Text | eng |
| dc.format.extent | 32 páginas | spa |
| dc.format.mimetype | application/pdf | spa |
| dc.language.iso | eng | spa |
| dc.publisher | Lubricants | spa |
| dc.relation.ispartof | Lubricants | |
| dc.rights | © 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/). | eng |
| dc.source | https://www.mdpi.com/2075-4442/8/11/97 | spa |
| dc.title | Study of the piston secondary movement on the tribological performance of a single cylinder low-displacement diesel engine | eng |
| dc.type | Artículo de revista | spa |
| dcterms.references | Han, D.-C.; Lee, J.-S. Analysis of the piston ring lubrication with a new boundary condition. Tribol. Int. 1998, 31, 753–760. | spa |
| dcterms.references | Amador, G.; Forero, J.D.; Rincon, A.; Fontalvo, A.; Bula, A.; Padilla, R.V.; Orozco, W. Characteristics of Auto-Ignition in Internal Combustion Engines OperatedWith Gaseous Fuels of Variable Methane Number. J. Energy Resour. Technol. 2017, 139, 042205. | spa |
| dcterms.references | Consuegra, F.; Bula, A.; Guillín, W.; Sánchez, J.; Duarte Forero, J. Instantaneous in-Cylinder Volume Considering Deformation and Clearance due to Lubricating Film in Reciprocating Internal Combustion Engines. Energies 2019, 12, 1437. | spa |
| dcterms.references | Duarte Forero, J.; Valencia Ochoa, G.; Piero Rojas, J. E ect of the Geometric Profile of Top Ring on the Tribological Characteristics of a Low-Displacement Diesel Engine. Lubricants 2020, 8, 83. | spa |
| dcterms.references | Wong, V.W.; Tian, T.; Lang, H.; Ryan, J.P.; Sekiya, Y.; Kobayashi, Y.; Aoyama, S. A Numerical Model of Piston Secondary Motion and Piston Slap in Partially Flooded Elastohydrodynamic Skirt Lubrication. In Proceedings of the SAE Technical Papers; SAE:Warrendale, PA, USA, 1994. | spa |
| dcterms.references | Valencia Ochoa, G.; Acevedo Peñaloza, C.; Duarte Forero, J. Thermo-economic assessment of a gas microturbine-absorption chiller trigeneration system under di erent compressor inlet air temperatures. Energies 2020, 12, 4643. | spa |
| dcterms.references | Ochoa, G.V.; Isaza-Roldan, C.; Duarte Forero, J. Economic and Exergo-Advance Analysis of aWaste Heat Recovery System Based on Regenerative Organic Rankine Cycle under Organic Fluids with Low Global Warming Potential. Energies 2020, 13, 1317. | spa |
| dcterms.references | Valencia Ochoa, G.; Duarte Forero, J.; Rojas, J.P. A comparative energy and exergy optimization of a supercritical-CO2 Brayton cycle and Organic Rankine Cycle combined system using swarm intelligence algorithms. Heliyon 2020, 6, e04136. | spa |
| dcterms.references | Ramírez, R.; Gutiérrez, A.S.; Cabello Eras, J.J.; Valencia, K.; Hernández, B.; Duarte Forero, J. Evaluation of the energy recovery potential of thermoelectric generators in diesel engines. J. Clean. Prod. 2019, 241, 118412. | spa |
| dcterms.references | Valencia Ochoa, G.; Acevedo Peñaloza, C.; Duarte Forero, J. Combustion and Performance Study of Low-Displacement Compression Ignition Engines Operating with Diesel–Biodiesel Blends. Appl. Sci. 2020, 10, 907. | spa |
| dcterms.references | Kimura, T.; Takahashi, K.; Sugiyama, S. Development of a Piston Secondary Motion Analysis Program with Elastically Deformable Piston Skirt. In Proceedings of the SAE Technical Papers; SAE:Warrendale, PA, USA, 1999. | spa |
| dcterms.references | Koizumi, T.; Tsujiuchi, N.; Okamura, M.; Kubomoto, I.; Ishida, E. Reduction of piston slap excitation with optimization of piston profile. In Proceedings of the SAE Technical Papers; SAE:Warrendale, PA, USA, 2000. | spa |
| dcterms.references | Tsujiuchi, N.; Koizumi, T.; Hamada, K.; Okamura, M.; Tsukijima, H. Optimization of Profile fo r Reduction of Piston Slap Excitation. In Proceedings of the SAE Technical Papers; SAE:Warrendale, PA, USA, 2004. | spa |
| dcterms.references | Murakami, H.; Nakanishi, N.; Ono, N.; Kawano, T. New Three-dimensional Piston Secondary Motion Analysis Method Coupling Structure Analysis and Multi Body Dynamics Analysis. SAE Int. J. Engines 2011, 5, 42–50. | spa |
| dcterms.references | Diaz, G.A.; Forero, J.D.; Garcia, J.; Rincon, A.; Fontalvo, A.; Bula, A.; Padilla, R.V. Maximum Power From Fluid Flow by Applying the First and Second Laws of Thermodynamics. J. Energy Resour. Technol. 2017, 139, 032903. | spa |
| dcterms.references | Mejía, A.; Leiva, M.; Rincón-Montenegro, A.; Gonzalez-Quiroga, A.; Duarte-Forero, J. Experimental assessment of emissions maps of a single-cylinder compression ignition engine powered by diesel and palm oil biodiesel-diesel fuel blends. Case Stud. Therm. Eng. 2020, 19, 100613. | spa |
| dcterms.references | Valencia Ochoa, G.; Cárdenas Gutierrez, J.; Duarte Forero, J. Exergy, Economic, and Life-Cycle Assessment of ORC System for Waste Heat Recovery in a Natural Gas Internal Combustion Engine. Resources 2020, 9, 2. | spa |
| dcterms.references | Espinel Blanco, E.; Valencia Ochoa, G.; Duarte Forero, J. Thermodynamic, Exergy and Environmental Impact Assessment of S-CO2 Brayton Cycle Coupled with ORC as Bottoming Cycle. Energies 2020, 13, 2259. | spa |
| dcterms.references | Gutierrez, J.C.; Valencia Ochoa, G.; Duarte-Forero, J. Regenerative Organic Rankine Cycle as Bottoming Cycle of an Industrial Gas Engine: Traditional and Advanced Exergetic Analysis. Appl. Sci. 2020, 10, 4411. | spa |
| dcterms.references | Dolatabadi, N.; Theodossiades, S.; Rothberg, S.J. Passive Control of Piston Secondary Motion Using Nonlinear Energy Absorbers. J. Vib. Acoust. 2017, 139. | spa |
| dcterms.references | Lu, Y.; Li, S.; Wang, P.; Liu, C.; Zhang, Y.; Müller, N. The Analysis of Secondary Motion and Lubrication Performance of Piston considering the Piston Skirt Profile. Shock Vib. 2018, 2018, 3240469. | spa |
| dcterms.references | Tan, Y.-C.; Ripin, Z.M. Analysis of piston secondary motion. J. Sound Vib. 2013, 332, 5162–5176. | spa |
| dcterms.references | Valencia Ochoa, G.; Piero Rojas, J.; Duarte Forero, J. Advance Exergo-Economic Analysis of aWaste Heat Recovery System Using ORC for a Bottoming Natural Gas Engine. Energies 2020, 13, 267. | spa |
| dcterms.references | Tan, Y.-C.; Ripin, Z.M. Technique to determine instantaneous piston skirt friction during piston slap. Tribol. Int. 2014, 74, 145–153. | spa |
| dcterms.references | Meng, F.;Wang, X.; Li, T.; Chen, Y. Influence of cylinder liner vibration on lateral motion and tribological behaviors for piston in internal combustion engine. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 2015, 229, 151–167. | spa |
| dcterms.references | Narayan, S. E ects of Various Parameters on Piston Secondary Motion. In Proceedings of the SAE Technical Papers; SAE:Warrendale, PA, USA, 2015. | spa |
| dcterms.references | Obert, P.; Müller, T.; Füßer, H.-J.; Bartel, D. The influence of oil supply and cylinder liner temperature on friction, wear and scu ng behavior of piston ring cylinder liner contacts—A new model test. Tribol. Int. 2016, 94, 306–314. | spa |
| dcterms.references | Mazouzi, R.; Kellaci, A.; Karas, A. E ects of piston design parameters on skirt-liner dynamic behavior. Ind. Lubr. Tribol. 2016, 68, 250–258. | spa |
| dcterms.references | Fang, C.; Meng, X.; Xie, Y. A piston tribodynamic model with deterministic consideration of skirt surface grooves. Tribol. Int. 2017, 110, 232–251. | spa |
| dcterms.references | Meng, F.M.; Zhang, Y.Y.; Hu, Y.Z.; Wang, H. Thermo-elasto-hydrodynamic lubrication analysis of piston skirt considering oil film inertia e ect. Tribol. Int. 2007, 40, 1089–1099. | spa |
| dcterms.references | Zhang, Z.; Xie, Y.; Zhang, X.; Meng, X. Analysis of piston secondary motion considering the variation in the system inertia. Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 2009, 223, 549–563. | spa |
| dcterms.references | Meng, X.; Xie, Y. A new numerical analysis for piston skirt–liner system lubrication considering the e ects of connecting rod inertia. Tribol. Int. 2012, 47, 235–243. | spa |
| dcterms.references | Meng, X.; Ning, L.; Xie, Y.; Wong, V.W. E ects of the connecting-rod-related design parameters on the piston dynamics and the skirt–liner lubrication. Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 2013, 227, 885–898. | spa |
| dcterms.references | Zhu, J.; Zhu, H.; Fan, S.; Xue, L.; Li, Y. A study on the influence of oil film lubrication to the strength of engine connecting rod components. Eng. Fail. Anal. 2016, 63, 94–105. | spa |
| dcterms.references | Pelosi, M.; Ivantysynova, M. Heat transfer and thermal elastic deformation analysis on the piston/cylinder interface of axial piston machines. J. Tribol. 2012, 134, 041101. | spa |
| dcterms.references | Ning, L.; Meng, X.; Xie, Y. Incorporation of deformation in a lubrication analysis for automotive piston skirt–liner system. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 2013, 227, 654–670. | spa |
| dcterms.references | Flores, P. A parametric study on the dynamic response of planar multibody systems with multiple clearance joints. Nonlinear Dyn. 2010, 61, 633–653. | spa |
| dcterms.references | Daniel, G.B.; Cavalca, K.L. Analysis of the dynamics of a slider–crank mechanism with hydrodynamic lubrication in the connecting rod–slider joint clearance. Mech. Mach. Theory 2011, 46, 1434–1452. | spa |
| dcterms.references | Flores, P.; Ambrósio, J.; Claro, J.C.P.; Lankarani, H.M. Influence of the contact—Impact force model on the dynamic response of multi-body systems. Proc. Inst. Mech. Eng. Part K J. Multi-Body Dyn. 2006, 220, 21–34. | spa |
| dcterms.references | Daniel, G.B.; Machado, T.H.; Cavalca, K.L. Investigation on the influence of the cavitation boundaries on the dynamic behavior of planar mechanical systems with hydrodynamic bearings. Mech. Mach. Theory 2016, 99, 19–36. | spa |
| dcterms.references | Patir, N.; Cheng, H.S. Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces. J. Lubr. Technol. 1979, 101, 220–229. | spa |
| dcterms.references | Patir, N.; Cheng, H.S. An Average Flow Model for Determining E ects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication. J. Lubr. Technol. 1978, 100, 12–17. | spa |
| dcterms.references | Greenwood, J.A.; Tripp, J.H. The contact of two nominally flat rough surfaces. Proc. Inst. Mech. Eng. 1970, 185, 625–633. | spa |
| dcterms.references | Hays, D.F. Theory of hydrodynamic lubrication. J. Frankl. Inst. 1961, 272, 521–522. | spa |
| dcterms.references | DuBois, G.B.; Ocvirk, F.W. Analytical Derivation and Experimental Evaluation of Short-Bearing Approximation for Full Journal Bearings; National Advisory Committee for Aeronautics: Kitty Hawk, NC, USA, 1953. | spa |
| dcterms.references | Zhu, D.; Hu, Y.-Z.; Cheng, H.S.; Arai, T.; Hamai, K. A Numerical Analysis for Piston Skirts in Mixed Lubrication: Part II—Deformation Considerations. J. Tribol. 1993, 115, 125–133. | spa |
| dcterms.references | Cantore, G.; Giacopini, M.; Rosi, R.; Strozzi, A.; Pelloni, P.; Forte, C.; Achiluzzi, M.; Bianchi, G.M.; Ceschini, L.; Morri, A. Validation of a combined CFD/FEM methodology for the evaluation of thermal load acting on aluminum alloy pistons through hardness measurements in internal combustion engines. Metall. Sci. Tecnol. 2011, 29, 16–25. | spa |
| dcterms.references | McFadden, P.D.; Turnbull, S.R. Dynamic analysis of piston secondary motion in an internal combustion engine under non-lubricated and fully flooded lubricated conditions. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 2011, 225, 2575–2585. | spa |
| dcterms.references | Zavos, A.; Nikolakopoulos, P.G. Measurement of friction and noise from piston assembly of a single-cylinder motorbike engine at realistic speeds. Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 2018, 232, 1715–1735. | spa |
| dc.identifier.doi | https://doi.org/10.3390/lubricants8110097 | |
| dc.publisher.place | Suiza | spa |
| dc.relation.citationedition | Vol.8 No.11.(2020) | spa |
| dc.relation.citationendpage | 32 | spa |
| dc.relation.citationissue | 11(2020) | spa |
| dc.relation.citationstartpage | 1 | spa |
| dc.relation.citationvolume | 8 | spa |
| dc.relation.cites | Forero, J. D., Ochoa, G. V., & Alvarado, W. P. (2020). Study of the piston secondary movement on the tribological performance of a single cylinder low-displacement diesel engine. Lubricants, 8(11), 97. | |
| dc.relation.ispartofjournal | Lubricants | spa |
| dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
| dc.rights.creativecommons | Atribución 4.0 Internacional (CC BY 4.0) | spa |
| dc.subject.proposal | clearances | eng |
| dc.subject.proposal | deformation effects | eng |
| dc.subject.proposal | diesel engine | eng |
| dc.subject.proposal | piston secondary motion | eng |
| dc.subject.proposal | tribological performance | eng |
| dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
| dc.type.content | Text | spa |
| dc.type.driver | info:eu-repo/semantics/article | spa |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
| oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
| oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
| dc.type.version | info:eu-repo/semantics/publishedVersion | spa |
