Objectives: This research proposes the feasibility of working on surfaces obtained by honing with 2D roughness parameters, as the 3D roughness measurement commonly used in the industry requires many hours of measurement time. ...

This paper developed a methodology for estimating Abbott-Firestone curves from the roughness parameters of the material probability curves. The surface roughness profile obtained in plateau-honing processes is the ...

The economy of the machining process is an important point that has been given attention since the beginning of the process. For this reason, this study focuses on the evaluation of the performance of the cylindrical ...

A bibliometric analysis of the literature on the subject of Environmental Impact Assessment for a period from 2007 to 2015 was carried out under an expanding and shifting focus. For this purpose, the metadata used ...

The complexity of the milling process has led us to study different parameters, among which are the cutting speed, feed speed, chip volume, cutting time and associated costs, which are the focus of this study. For this ...

This article analyses the hardness of ASTM-A36 steel both in its delivery state and after various cutting processes. The material was cut with different methods conventionally used in the metal-mechanic and construction ...

Regenerative vibration is a major drawback in machining processes reducing the geometric accuracy and dynamic stability of the cutting system. Achieving a dynamically stable cutting operation represents a significant ...

This article analyses the microstructure of ASTM-A36 steel both in its delivery state and after various cutting processes. The material was cut with some methods conventionally used in the metal-mechanical and construction ...

This article analyses the roughness of ASTM-A36 steel both in its delivery state and after various cutting processes. The material was cut with different methods conventionally used in the metal-mechanic and construction ...

The chattering in the machine tools is a phenomenon that causes instability in the machining process, surface finish with high roughness, also produces excessive and accelerated wear on the tool in the metal cutting ...