Buscar
Mostrando ítems 1-10 de 20
Evaluation of the drinking water treatment system (STAP) San Fernando –Los Patios urbanization, Colombia. Efficiency and qualityEvaluación del sistema de tratamiento de agua potable (STAP) en la urbanización San Fernando -Los Patios, Colombia. Eficiencia y calidad
(Revista UIS Ingenierías, 2020-08-26)
The quality of water for human consumption in the municipality of Los Patios in Colombia, depends 60% of the treatment systems for drinking water (STAP) independent, these are adapted according to the ...
PEST analysis of wind energy in the world: From the worldwide boom to the emergent in Colombia
(Journal of Physics: Conference Series, 2018-12-07)
This article presents the analysis of the political, economic, social and technological aspects of the countries with the greatest development and generation of wind energy in the world, with the aim of studying the successes ...
Artisanal filter with geo-materials: a basic water treatment alternative for human consumption in marginal areas
(Contemporary Engineering Sciences, 2018-11-29)
The article presents the design and development of filters (easy to implement in
homes) that have the capacity to eliminate microorganisms and chemical
substances; therefore, they act as handmade water purifiers. It ...
Bibliometric study of state observer research applied to internal combustion engine
(Journal of Physics: Conference Series, 2018-12-07)
The present study was conducted to evaluate the worldwide scientific production related to observers applied to internal combustion engines by taking information from the Web of Science (WoS) database and taking the papers ...
Experimental study of the 2D variability roughness in the honing process of the steel cylinder
(Contemporary Engineering Sciences, 2018-05-29)
This article presents the study of the surface roughness inside cylinders, machined
by honing in industrial honing machines, with a detailed review of the variability
of the values obtained in the measurement of the ...
Determination of the theoretical stress concentration factor in structural flat plates with two holes subjected to bending loads
(Contemporary Engineering Sciences, 2018-11-22)
Numerous research works have studied the stress distribution in sections with
geometric discontinuities and the relationship with the theoretical factor of stress
concentration using the finite element method. These works ...
Scientometric analysis of research on emissions control from 2007 to 2017
(International Journal of Applied Engineering Research, 2018-01)
A scientometric analysis of the production of scientific publications on emissions control from 2007 to 2017 was carried out. HistCite was used to analyze information collected from Web of Science (WoS) on this topic during ...
Design of an automated cheese cutting machine prototype
(Contemporary Engineering Sciences, 2018-11-30)
This work describes each of the parameters for the design of a prototype of an
automated machine to make cuts in different types of cheese, in cubic form and
slices. Each mechanical and structural component is designed, ...
Comparison of the radius of curvature in the cams which used in the displacement law beziér curves and cyclic and harmonic curves
(Contemporary Engineering Sciences, 2018-11-07)
The work shows the radius of curvature for different variations of the angle of
rotation β and of the ratio of Ro/L, the study is shown for the case in which the
laws of displacement of the cams have been designed by ...
Analysis and optimization for the process of glass tempering using autoclave
(Journal of Physics: Conference Series, 2018-12-07)
A mathematical analysis of the glass tempering process was carried out using an autoclave, varying the operating parameters of the system. It was found that the process time can be reduced by up to 3.23% by changing the ...