Mostrar el registro sencillo del ítem
Optimization of the parameters for obtaining zirconiaalumina coatings, made by flame spraying from results of numerical simulation
dc.contributor.author | Peña Rodriguez, Gabriel | |
dc.contributor.author | Ferrer, Martha | |
dc.contributor.author | Vargas, Fabio | |
dc.date.accessioned | 2021-11-26T23:44:07Z | |
dc.date.available | 2021-11-26T23:44:07Z | |
dc.date.issued | 2017-12-29 | |
dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/1476 | |
dc.description.abstract | The K-Sommerfeld values (K) and the melting percentage (% F) obtained by numerical simulation using the Jets et Poudres software were used to find the projection parameters of zirconia-alumina coatings by thermal spraying flame, in order to obtain coatings with good morphological and structural properties to be used as thermal insulation. The experimental results show the relationship between the Sommerfeld parameter and the porosity of the zirconia-alumina coatings. It is found that the lowest porosity is obtained when the K-Sommerfeld value is close to 45 with an oxidant flame, on the contrary, when superoxidant flames are used K values are close 52, which improve wear resistance. | eng |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | eng | spa |
dc.publisher | Journal of Physics: Conference Series | spa |
dc.relation.ispartof | Journal of Physics: Conference Series | |
dc.rights | Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltd | eng |
dc.source | https://iopscience.iop.org/article/10.1088/1742-6596/935/1/012023/meta | spa |
dc.title | Optimization of the parameters for obtaining zirconiaalumina coatings, made by flame spraying from results of numerical simulation | eng |
dc.type | Artículo de revista | spa |
dcterms.references | Muñoz J 2012 Una visión general de los cerámicos de circona–estructura, propiedades y aplicaciones Rev. Colomb. Mater. 2 1-18 | spa |
dcterms.references | Garvie R C, Hannink RH and Pascoe R T 1975 Ceramic steel? Nature 258 703-704 | spa |
dcterms.references | Gonzalez A, Henao J, Diaz A F, López E and Vargas F 2013 Influencia de los parámetros de proyección térmica en la microestructura de los recubrimientos de circona-alúmina y circona-ceria usados como barreras térmicas Rev. Latinoam. Metal. y Mater. 33 272-281 | spa |
dcterms.references | Cadavid E, Parra C, Soto D and Vargas F 2015 Memorias del VIII Congreso Internacional de Materiales (Paipa) (Colombia: Universidad Pedagógica y Tecnológica de Colombia) Estudio termo-físico de llamas oxiacétilenicas utilizadas en la proyección térmica | spa |
dcterms.references | Fauchais P L, Heberlein J V and Boulos M 2014 Thermal spray fundamentals (New York: Springer) | spa |
dcterms.references | Berndt E C 2001 Thermal Spray 2001 New surfaces for a new millennium Int. Therm. Spray Conf. 14 | spa |
dcterms.references | Mundo C, Tropea C and Sommerfeld M 1997 Numerical and experimental investigation of spray characteristics in the vicinity of a rigid wall Experimental thermal and fluid science 15 228-237 | spa |
dcterms.references | Mundo C, Sommerfeld M and Tropea C 1995 Droplet-wall collisions: Experimental studies of the deformation and breakup process Int. J. Multiph. Flow 21 151-173 | spa |
dcterms.references | Jets&Poudres 2009 Software assistant for thermal spray coating (France: Université de Limoges) http://jets.poudres.free.fr/en/downloadupdates.html | spa |
dcterms.references | McWilliams A 2016 High-performance ceramic coatings: Markets and technologies (USA: BccResearch) | spa |
dcterms.references | Pawlowski L 2008 The science and engineering of thermal spray coatings 2 (Great Britain: John Wiley & Sons, Ltd.) 656 | spa |
dcterms.references | Fukumoto M, Tanaka Y and Nishioka E 2004 Flattening Problem of Thermal Sprayed Particles Mate. Sc. Forum 449–452 1309-1312 | spa |
dcterms.references | Fauchais P L, Vardelle M, Vardelle A, Bianchi L and Léger A 1995 Parameters controlling the generation and properties of plasma spray zirconia coatings Plasma Chem. and Plasma Process 16 99-125 | spa |
dc.identifier.doi | 10.1088/1742-6596/935/1/012023 | |
dc.publisher.place | Londres , Inglaterra | spa |
dc.relation.citationedition | Vol.935 No.1.(2017) | spa |
dc.relation.citationendpage | 6 | spa |
dc.relation.citationissue | 1 (2017) | spa |
dc.relation.citationstartpage | 1 | spa |
dc.relation.citationvolume | 935 | spa |
dc.relation.cites | Ferrer, M., Vargas, F., & Peña, G. (2017, December). Optimization of the parameters for obtaining zirconia-alumina coatings, made by flame spraying from results of numerical simulation. In Journal of Physics: Conference Series (Vol. 935, No. 1, p. 012023). IOP Publishing. | |
dc.relation.ispartofjournal | Journal of Physics: Conference Series | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.rights.creativecommons | Atribución 4.0 Internacional (CC BY 4.0) | spa |
dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
dc.type.content | Text | spa |
dc.type.driver | info:eu-repo/semantics/article | spa |
dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
dc.type.version | info:eu-repo/semantics/publishedVersion | spa |