Show simple item record

dc.contributor.authorPeña Rodriguez, Gabriel
dc.contributor.authorFerrer, Martha
dc.contributor.authorRodriguez Wilches, Luis Francisco
dc.date.accessioned2021-11-25T16:56:43Z
dc.date.available2021-11-25T16:56:43Z
dc.date.issued2019-11-29
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/1425
dc.description.abstractTungsten carbide is used in the production of cutting tools for steel and as protection against wear due to its extremely high hardness. High speed oxygen fuel spraying process has been widely used to deposit WC-Co coatings. However, the decomposition and oxidation of WC-Co has been reported during the process, where carbon and tungsten are released, resulting in the formation of an amorphous matrix with the cobalt of the compound. This is attributed to the high heating and cooling rates suffered by the raw material. An alternative method is the thermal spray by flame, which allows controlling the working temperature and the residence time of the particles in the hot flame, avoiding the decomposition of tungsten carbide, on the other hand, it is a versatile and a low cost method. In this study projection parameters of a WC-18Co coating sprayed with a thermal flame spraying process from a commercial feedstock powder were determined to decide the conditions under which compact coatings are obtained with low porosity, avoiding dissociation of the tungsten carbide. The composition of the powders and substrates was determined by X-ray fluorescence microscopy and optical emission, respectively, X-ray diffraction studies were performed to characterize compositions and microstructures the coatings sprayed; the morphology was by scanning electron microscope. It was found that the best condition for this type of coatings is a neutral flame at a projection distance of 12 cm.eng
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherJournal of Physics: Conference Seriesspa
dc.relation.ispartofJournal of Physics: Conference Series
dc.rightsContent from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltdeng
dc.sourcehttps://iopscience.iop.org/article/10.1088/1742-6596/1386/1/012023/metaspa
dc.titleObtaining and characterizing of WC-Co coatings obtained from thermal spray by flameeng
dc.typeArtículo de revistaspa
dcterms.referencesVerdon C, Karimi A and Martin J 1998 A study of high velocity oxy-fuel thermally sprayed tungsten carbide based coatings Microstructures Materials Science and Engineering: A 246 11-24spa
dcterms.referencesMahdipoor M, Tarasi F, Moreau C, Dolatabadi A and Medraj M 2015 HVOF sprayed coatings of nano- agglomerated tungsten-carbide/cobalt powders for water droplet erosion application Wear 330-331 38-347spa
dcterms.referencesLiao H, Normand B and Coddet C 2000 Influence of coating microstructure on the abrasive wear resistance of WC/Co cermet Surface and Coatings Tecnology 124 235-242spa
dcterms.referencesThiele S, Sempf K, Jaenicke-roessler K and Berger L 2011 Thermophysical and Microstructural Studies on Thermally Sprayed Tungsten Carbide-Cobalt Thermay Spray Thecnology 20 358-365spa
dcterms.referencesTu D, Chang S, Chao C and Lin C 2014 Tungsten carbide phase transformation during the plasma spray process Journal of Vacuum Science & Technology 3 2479-2482spa
dcterms.referencesNerz J, Kushner B and Rotolico A 1992 Microstructural Evaluation of Tungsten Carbide-Cobalt Coatings Journal of Vacuum Science & Technology 1 147-152spa
dcterms.referencesPawlowski L 2008 The science and engineering of thermal spray coatings (United States: Wiley)spa
dcterms.referencesDavis J 2004 Handbook of Thermal Spray Technology (United States: ASM International)spa
dcterms.referencesFauchais P, Heberlein J and Boulos M 2014 Thermal spray fundamentals (United States: Springer)spa
dcterms.referencesFerrer M, Vargas F and Moreno M 2018 Recubrimientos de circona y alúmina por proyección térmica con llama (Tunja: Editorial UPTC)spa
dcterms.referencesCadavid E, Velásquez P and Vargas F 2016 Estudio de llamas oxiacetilénicas usadas en la proyección térmica Revista Colombiana de Materiales 9 15-26spa
dcterms.referencesCadavid E, Parra C and Soto D 2015 Estudio termo-físico de llamas oxiacetilénicas utilizadas en la proyección térmica Proceedings del VIII Congreso Internacional de Materiales (Paipa) (Tunja,) 8 1-6 Universidad Pedagogica y Tecnologica de Colombiaspa
dc.identifier.doi10.1088/1742-6596/1386/1/012023
dc.publisher.placeLondres, Reino Unidospa
dc.relation.citationeditionVol.1386 No.1.(2019)spa
dc.relation.citationendpage7spa
dc.relation.citationissue1 (2019)spa
dc.relation.citationstartpage1spa
dc.relation.citationvolume1386spa
dc.relation.citesFerrer, M., Peña, G., & Rodríguez, L. F. (2019, November). Obtaining and characterizing of WC-Co coatings obtained from thermal spray by flame. In Journal of Physics: Conference Series (Vol. 1386, No. 1, p. 012023). IOP Publishing.
dc.relation.ispartofjournalJournal of Physics: Conference Seriesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record