Mostrar el registro sencillo del ítem

dc.contributor.authorHurtado-Figueroa, Oswaldo
dc.contributor.authorCárdenas-Gutiérrez, Javier Alfonso
dc.contributor.authorCordero Estevez, Gerson David
dc.date.accessioned2021-11-23T15:08:30Z
dc.date.available2021-11-23T15:08:30Z
dc.date.issued2018-11-26
dc.identifier.urihttp://repositorio.ufps.edu.co/handle/ufps/1277
dc.description.abstractA conventional concrete mixture elaborated according to the parameters described in the Colombian Technical Standards NTC under the conditioning established by the Quake Resistant Standard NSR-10 that regulates our country. A residual ceramic sample was taken from elements of masonry and tiles from the brick industry Santa Rosa, the obtained material was taken to the crusher La Victoria, where the milling process and reduction of particles was performed as well as to the conventional mineral aggregates. The granulometry was performed to the coarse aggregate of the crushed ceramic material according to the NTC-77, simultaneously the respective test to determine its physical properties according to the stipulated by the same standards were performed. Designs of experimental mixtures were made, 10, 20-100% of the weight of the conventional concrete coarse aggregate was replaced by its equivalent in ceramic coarse aggregate. To the designs of both conventional and experimental mixtures, the test of concrete setting was performed with the help of the concrete slump test to determine its handling. The results obtained by the test performed to the different mixtures were portrayed in a table, were the obtained data for the conventional concrete mixture was used as a comparative base for the rest of the data.eng
dc.format.extent09 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherContemporary Engineering Sciencesspa
dc.relation.ispartofContemporary Engineering Sciences
dc.rightsCopyright © 2018 Oswaldo Hurtado-Figueroa et al.eng
dc.sourcehttp://www.m-hikari.com/ces/ces2018/ces97-100-2018/810543.htmlspa
dc.titleHandling of concrete with addition of residual ceramic material in different % replacing conventional stony aggregateeng
dc.typeArtículo de revistaspa
dcterms.referencesA. M. Alhozaimy, Effect of absorption of limestone aggregates on strength and slump loss of concrete, Cem. Concr. Compos., 31 (2009), no. 7, 470–473. https://doi.org/10.1016/j.cemconcomp.2009.04.010spa
dcterms.referencesR. Combrinck, L. Steyl and W. P. Boshoff, Interaction between settlement and shrinkage cracking in plastic concrete, Constr. Build. Mater., 185 (2018), 1–11. https://doi.org/10.1016/j.conbuildmat.2018.07.028spa
dcterms.referencesM. A. DeRousseau, J. R. Kasprzyk and W. V. Srubar, Computational design optimization of concrete mixtures: A review, Cem. Concr. Res., 109 (2018), 42– 53. https://doi.org/10.1016/j.cemconres.2018.04.007spa
dcterms.referencesR. Combrinck, L. Steyl and W. P. Boshoff, Influence of concrete depth and surface finishing on the cracking of plastic concrete, Constr. Build. Mater., 175 (2018), 621–628. https://doi.org/10.1016/j.conbuildmat.2018.04.225spa
dcterms.referencesC. Zheng, C. Lou, G. Du, X. Li, Z. Liu and L. Li, Mechanical properties of recycled concrete with demolished waste concrete aggregate and clay brick aggregate, Results Phys., 9 (2018), 1317–1322. https://doi.org/10.1016/j.rinp.2018.04.061spa
dcterms.referencesQ. Peng, L. Wang and Q. Lu, Influence of recycled coarse aggregate replacement percentage on fatigue performance of recycled aggregate concrete, Constr. Build. Mater., 169 (2018), 347–353. https://doi.org/10.1016/j.conbuildmat.2018.02.196spa
dcterms.referencesS. Laserna and J. Montero, Influence of natural aggregates typology on recycled concrete strength properties, Constr. Build. Mater., 115 (2016), 78–86. https://doi.org/10.1016/j.conbuildmat.2016.04.037spa
dcterms.referencesG. Fares, Effect of slump cone orientation on the slump flow time (T50) and stability of sustainable self-compacting concrete containing limestone filler, Constr. Build. Mater., 77 (2015), 145–153. https://doi.org/10.1016/j.conbuildmat.2014.12.052spa
dcterms.referencesK. Ma, J. Feng, G. Long, Y. Xie and X. Chen, Improved mix design method of self-compacting concrete based on coarse aggregate average diameter and slump flow, Constr. Build. Mater., 143 (2017), 566–573. https://doi.org/10.1016/j.conbuildmat.2017.03.142spa
dcterms.referencesY. Liu, N. J. Balmforth and S. Hormozi, Axisymmetric viscoplastic dambreaks and the slump test, J. Nonnewton. Fluid Mech., 258 (2018), 45–57. https://doi.org/10.1016/j.jnnfm.2018.04.012spa
dc.identifier.doihttps://doi.org/10.12988/ces.2018.810543
dc.publisher.placeBulgariaspa
dc.relation.citationeditionVol.11 No.100.(2018)spa
dc.relation.citationendpage4955spa
dc.relation.citationissue100(2018)spa
dc.relation.citationstartpage4947spa
dc.relation.citationvolume11spa
dc.relation.citesHurtado-Figueroa, O., Cordero-Estévez, G. D., & Cárdenas-Gutiérrez, J. A. (2018). Handling of Concrete with Addition of Residual Ceramic Material in Different% Replacing Conventional Stony Aggregate.
dc.relation.ispartofjournalContemporary Engineering Sciencesspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.creativecommonsAtribución 4.0 Internacional (CC BY 4.0)spa
dc.subject.proposalConcreteeng
dc.subject.proposalResidual ceramiceng
dc.subject.proposalAggregateseng
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem