Mostrar el registro sencillo del ítem
Effects of corundum in the development of structural, mechanical and tribological properties of raw materials for the manufacture of structural products
Efeitos do coríndon no desenvolvimento de propriedades estruturais, mecânicas e tribológicas das matérias-primas para a fabricação de produtos estruturais
dc.contributor.author | CELY ILLERA, CLAUDIA VANESSA | |
dc.contributor.author | Cely Niño, Jairo | |
dc.contributor.author | CELY ILLERA, LEONARDO | |
dc.date.accessioned | 2021-11-19T16:32:00Z | |
dc.date.available | 2021-11-19T16:32:00Z | |
dc.date.issued | 2018 | |
dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/1149 | |
dc.description.abstract | Improving the technological properties of a ceramic product without affecting its aesthetic quality is a daily challenge of the regional ceramic companies. To achieve this objective, analyzes were performed on an illitic-kaolinitic clay by adding corundum as an additive. The corundum content varied from 5% to 20% by weight with a particle size of less than 75 μm, being able to obtain products with low porosities and high mechanical resistance. This research is part of a series of studies carried out on an argillaceous raw material from the region of Norte de Santander (Colombia). The influence of the corundum content on the technological properties was evaluated. The results showed that corundum, when mixed with traditional raw materials, offers the conditions to be used as an additive in the production of ceramic products with increases of up to 67% in mechanical strength and a reduction of porosity of 46%, which can contribute to the development of value-added ceramic products for use in other technological applications. | eng |
dc.description.abstract | Melhorar as propriedades tecnológicas de um produto cerâmico sem afetar sua qualidade estética é um desafio diário das empresas regionais de cerâmica. Para atingir este objetivo, foram realizadas análises em uma argila ilítica-caulinítica com adição de 5% a 20% em massa de coríndon com tamanho de partícula inferior a 75 μm, obtendo produtos com baixa porosidade e alta resistência mecânica. Esta pesquisa é parte de uma série de estudos realizada em uma matéria-prima argilosa da região do Norte de Santander (Colômbia). Foi estudado o efeito do teor de coríndon nas propriedades tecnológicas. Os resultados mostraram que o coríndon, quando adicionado a matérias-primas tradicionais, pode ser usado como um aditivo na manufatura de produtos cerâmicos com aumentos de até 67% na resistência mecânica e redução de porosidade de 46%, o que pode contribuir para o desenvolvimento de produtos cerâmicos com valor agregado para uso em outras aplicações tecnológicas. | por |
dc.format.extent | 7 páginas | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | eng | spa |
dc.publisher | Ceramica | spa |
dc.relation.ispartof | Ceramica ISSN: 1678-4553, 2018 vol:64 fasc: N/A págs: 352 - 358 | |
dc.rights | Este es un artículo de acceso abierto distribuido bajo los términos de la licencia de atribución Creative Commons. | spa |
dc.source | https://www.scielo.br/j/ce/a/b8BS49YG6q4YtdVMMbmmZ7q/?lang=en | spa |
dc.title | Effects of corundum in the development of structural, mechanical and tribological properties of raw materials for the manufacture of structural products | eng |
dc.title | Efeitos do coríndon no desenvolvimento de propriedades estruturais, mecânicas e tribológicas das matérias-primas para a fabricação de produtos estruturais | por |
dc.type | Artículo de revista | spa |
dcterms.references | G. Benveniste, C. Gazulla, P. Fullana, I. Celades, T. Ros, V. Zaera, B. Godes, Inf. Constr. 63, 522 (2011) 71. | spa |
dcterms.references | W. Chih-Huang, L. Deng-Fong, C. Pen-Chi, Adv. Environ. Res. 7 (2003) 679. | spa |
dcterms.references | L. Cely Illera, Rev. Fac. Ing. Univ. Antioquía 80 (2016) 31. | spa |
dcterms.references | A. Safeer, I. Yaseen, M. Raz, Bol. Soc. Esp. Ceram. Vidr. 56 (2017) 131. | spa |
dcterms.references | ISO 8486-1, “Bonded abrasives: determination and designation of grain size distribution, part 1: macrogrits F4 to F220” (2011). | spa |
dcterms.references | J.F. Gelves, R. Monroy, J. Sánchez, R.P. Ramírez, Bol. Soc. Esp. Ceram. Vidr. 52, 1 (2013) 48. | spa |
dcterms.references | Am. Soc. Test. Mater., ASTM C326-03: “Standard test method for drying and firing shrinkages of ceramic whiteware clays” (2011). | spa |
dcterms.references | ISO 10545-3, “Ceramic tiles - part 3: determination of water absorption, apparent porosity, apparent relative” (1995). | spa |
dcterms.references | ISO 10545-4, “Ceramic tiles - part 4: determination of modulus of rupture and breaking strength” (1994). | spa |
dcterms.references | ISO 10545-6, “Ceramic tiles - part 6: determination of resistance to deep abrasion for unglazed tiles” (1995). | spa |
dcterms.references | C. Hoffmann, E.F.U. Carvalho, H.G. Riella, A.M. Bernardin, in: Congr. Mund. Calid. Azul. Pavim. Cerám., Castellon (2008) 149. | spa |
dcterms.references | N.U. Kockal, Bol. Soc. Esp. Ceram. Vidr. 51, 5 (2012) 297. | spa |
dcterms.references | J.L. Amoros, A. Belda, M.J. Orts, A. Escardino, Bol. Soc. Esp. Ceram. Vidr. 31, 2 (1992) 109. | spa |
dcterms.references | S. de Aza Pendas, Bol. Soc. Esp. Ceram. Vidr. 3, 4 (1964) 395. | spa |
dcterms.references | A. Escardino Benlloch, J.L. Amores Albaro, J.E. Enrique Navarro, Bol. Soc. Esp. Ceram. Vidr. 20, 1 (1981) 17. | spa |
dcterms.references | R. Galindo Renau, Prensas, moldes y prensado en la fabricación de baldosas cerámicas, Vol. 1, Macer, Italia (2008). | spa |
dcterms.references | J.L. Amoros, A. Moreno, M.J. Orts, A. Escardino, Bol. Soc. Esp. Ceram. Vidr. 29, 3 (1990) 151. | spa |
dcterms.references | J.L. Amorós, C. Felíu, E. Ginés, J.V. Agramunt, Bernardin, in: Congr. Mund. Calid. Azul. Pavim. Cerám., Castellon (1996) 153. | spa |
dcterms.references | G.-H. Mahdavi, S. Arjmandnia, M. Fouladkar, in: Congr. Mund. Calid. Azul. Pavim. Cerám., Castellon (2016) 1. | spa |
dcterms.references | M. Araque-Pabón, G. Peña-Rodríguez, F. VargasGalvis, TecnoLógicas 18, 35 (2015) 125. | spa |
dcterms.references | S.N. Monteiro, J. Alexandre, J.I. Margem, R. Sánchez, C.M. Vieira, Constr. Build. Mater. 22 (2008) 1281. | spa |
dcterms.references | L. Ven-Gen, Y. Ting-Hao, Mater. Sci. Eng. A. 485 (2008) 5. | spa |
dcterms.references | J. Gilabert, E. Zumaquero, C. Machí, J. Toledo, M.P. Gómez-Tena, Bol. Soc. Esp. Ceram. Vidr. 54, 5 (2015) 209. | spa |
dcterms.references | N. Afanador García, G. Guerrero Gómez, R. Monroy Sepúlveda, Cienc. Ing. Neogranad. 22, 1 (2012) 43. | spa |
dcterms.references | J.F. Gelves Diaz, J. Sánchez Molina, G. Peña Rodríguez, Respuestas 14, 2 (2009) 32. | spa |
dcterms.references | S.M. Rozo Rincón, J. Sánchez Molina, D.C. Álvarez, Cienc. Ing. Neogranad. 24, 1 (2014) 67. | spa |
dcterms.references | ISO 13006, “Ceramic tiles - definitions, classification, characteristics and marking” (1998). | spa |
dcterms.references | A.L. Abitante, C.P. Bergmann, J.L. Ribeiro, Eng. Civ. 29 (2007) 71. | spa |
dcterms.references | L. Esposito, A. Tucci, Bol. Soc. Esp. Ceram. Vidr. 39, 1 (2000) 165. | spa |
dcterms.references | S. Ghasemi-Kahrizsangi, H.G. Dehsheikh, M. Boroujerdnia, Bol. Soc. Esp. Ceram. Vidr. 56 (2017) 83. (Rec. 17/07/2017, Rev. 18/10/2017, 26/12/2017, Ac. 14/01/2018) | spa |
dc.identifier.doi | 10.1590/0366-69132018643712327 | |
dc.publisher.place | Brasil | spa |
dc.relation.citationedition | Vol. 64, No. 371 (2018) | spa |
dc.relation.citationendpage | 358 | spa |
dc.relation.citationissue | 371 (2018) | spa |
dc.relation.citationstartpage | 352 | spa |
dc.relation.citationvolume | 64 | spa |
dc.relation.cites | Cely Illera, L., Cely, J. and Cely Illera, C. V.Effects of corundum in the development of structural, mechanical and tribological properties of raw materials for the manufacture of structural products. Cerâmica [online]. 2018, v. 64, n. 371 [Accessed 19 November 2021] , pp. 352-358. Available from: https://doi.org/10.1590/0366-69132018643712327. ISSN 1678-4553. https://doi.org/10.1590/0366-69132018643712327. | |
dc.relation.ispartofjournal | Ceramica | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.rights.creativecommons | Atribución-NoComercial 4.0 Internacional (CC BY-NC 4.0) | spa |
dc.subject.proposal | Corundum waste | eng |
dc.subject.proposal | Water absorption | eng |
dc.subject.proposal | Abrasion | eng |
dc.subject.proposal | Flexural strength | eng |
dc.subject.proposal | Tribological behaviour. | eng |
dc.subject.proposal | Resíduo de coríndon | por |
dc.subject.proposal | Absorção de água | por |
dc.subject.proposal | Abrasão | por |
dc.subject.proposal | Resistência à flexão | por |
dc.subject.proposal | Comportamento tribológico | por |
dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
dc.type.content | Text | spa |
dc.type.driver | info:eu-repo/semantics/article | spa |
dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
dc.type.version | info:eu-repo/semantics/publishedVersion | spa |