Mostrar el registro sencillo del ítem

Evaluation of Performance Parameters and Emissions of a Diesel Engine Fueled with Preheated Palm Oil Mill Effluent Biodiesel Blends

dc.contributor.authorPardo García, Carlos Eduardo
dc.contributor.authorPABON LEON, JHON ANTUNY
dc.contributor.authorFONSECA VIGOYA, MARLEN DEL SOCORRO
dc.date.accessioned2022-12-05T19:38:44Z
dc.date.available2022-12-05T19:38:44Z
dc.date.issued2021
dc.identifier.urihttps://repositorio.ufps.edu.co/handle/ufps/6643
dc.description.abstractThe current research analyzes the effect of fuel preheating on performance parameters and emission characteristics in a stationary diesel engine fuelled with palm oil mill effluent biodiesel blends. The investigation has been carried out on an experimental test bench under four-engine load conditions. The fuel injection temperature range is set between 35-75 °C. From the results obtained, it has been possible to demonstrate that the preheating process allows the reduction of fuel consumption and an increase in the efficiency of the engine powered with POME 5 and POME 10 blends. The preheating process has the potential to reduce by 14 % BSFC and increase by 17% the BTE of the engine. Additionally, the results have showed a reduction potential of 17.2%, 16.5%, and 15.6% in CO2, HC, and smoke opacity emissions when preheating processes are used in POME biodiesel blends. In general, this type of strategy is a promising solution to incentivize the use of biodiesel blends from palm oil mill effluent.eng
dc.format.extent07 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherInternational Review of Mechanical Engineeringspa
dc.relation.ispartofInternational Review of Mechanical Engineering. Vol.15 N°.10 (2021)
dc.rightsCopyright © 2021 Praise Worthy Prize - All rights reserved.eng
dc.sourcehttps://www.praiseworthyprize.org/jsm/index.php?journal=ireme&page=article&op=view&path%5B%5D=26228spa
dc.titleEvaluation of Performance Parameters and Emissions of a Diesel Engine Fueled with Preheated Palm Oil Mill Effluent Biodiesel Blendseng
dc.typeArtículo de revistaspa
dcterms.referencesV. M. Ortiz-Martinez, P. Andreo-Martinez, N. Garcia-Martinez, A. P. de los Rios, F. J. Hernández-Fernández, and J. Quesada-Medina, Approach to biodiesel production from microalgae under supercritical conditions by the PRISMA method, Fuel processing technology, vol. 191, pp. 211-222, 2019. https://doi.org/10.1016/j.fuproc.2019.03.031spa
dcterms.referencesMustafa, R., Al-Rawashdeh, H., Hassan, A., Gomaa, M., Enhancement of a Hydrogen Engine Cavitation Utilizing Mixed Fuel: a Review and Experimental Case Study, (2020) International Review of Mechanical Engineering (IREME), 14 (1), pp. 33-42. https://doi.org/10.15866/ireme.v14i1.17311spa
dcterms.referencesOmojola, A., Inambao, F., Onuh, E., Prediction of Properties, Engine Performance and Emissions of Compression Ignition Engines Fuelled with Waste Cooking Oil Methyl Ester - A Review of Numerical Approaches, (2019) International Review of Mechanical Engineering (IREME), 13 (2), pp. 97-110. https://doi.org/10.15866/ireme.v13i2.16496spa
dcterms.referencesOrozco, W., Acuña, N., Duarte Forero, J., Characterization of Emissions in Low Displacement Diesel Engines Using Biodiesel and Energy Recovery System, (2019) International Review of Mechanical Engineering (IREME), 13 (7), pp. 420-426. https://doi.org/10.15866/ireme.v13i7.17389spa
dcterms.referencesS. Loganathan, M. L. J. Martin, B. Nagalingam, and L. Prabhu, Heat release rate and performance simulation of DME fuelled diesel engine using oxygenate correction factor and load correction factor in double Wiebe function, Energy, vol. 150, pp. 77-91, 2018. https://doi.org/10.1016/j.energy.2018.02.112spa
dcterms.referencesJ. D. Forero, G. V. Ochoa, and W. P. Alvarado, Study of the Piston Secondary Movement on the Tribological Performance of a Single Cylinder Low-Displacement Diesel Engine, Lubricants, vol. 8, no. 11, pp. 97-128, 2020. https://doi.org/10.3390/lubricants8110097spa
dcterms.referencesJ. Duarte Forero, G. Valencia Ochoa, and J. Piero Rojas, Effect of the Geometric Profile of Top Ring on the Tribological Characteristics of a Low-Displacement Diesel Engine, Lubricants, vol. 8, no. 8, p. 83, 2020. https://doi.org/10.3390/lubricants8080083spa
dcterms.referencesB. Hernández-Comas, D. Maestre-Cambronel, C. Pardo-García, M. D. S. Fonseca-Vigoya, and J. Pabón-León, Influence of Compression Rings on the Dynamic Characteristics and Sealing Capacity of the Combustion Chamber in Diesel Engines, Lubricants, vol. 9, no. 3, pp. 25-57, 2021. https://doi.org/10.3390/lubricants9030025spa
dcterms.referencesE. Rajasekar and S. Selvi, Review of combustion characteristics of CI engines fueled with biodiesel, Renewable and Sustainable Energy Reviews, vol. 35, pp. 390-399, 2014. https://doi.org/10.1016/j.rser.2014.04.006spa
dcterms.referencesH. Raheman and A. G. Phadatare, Diesel engine emissions and performance from blends of karanja methyl ester and diesel, Biomass and bioenergy, vol. 27, no. 4, pp. 393-397, 2004. https://doi.org/10.1016/j.biombioe.2004.03.002spa
dcterms.referencesI. M. R. Fattah, H. H. Masjuki, A. M. Liaquat, R. Ramli, M. A. Kalam, and V. N. Riazuddin, Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions, Renewable and Sustainable Energy Reviews, vol. 18, pp. 552-567, 2013. https://doi.org/10.1016/j.rser.2012.10.036spa
dcterms.referencesE. Alptekin and M. Canakci, Determination of the density and the viscosities of biodiesel--diesel fuel blends, Renewable Energy, vol. 33, no. 12, pp. 2623-2630, 2008. https://doi.org/10.1016/j.renene.2008.02.020spa
dcterms.referencesG. Rao, G. N. Kumar, and M. Herbert, Effect of injection pressure on the performance and emission characteristics of the CI engine using Vateria indica biodiesel, International Journal of Ambient Energy, vol. 40, no. 7, pp. 758-767, 2019. https://doi.org/10.1080/01430750.2017.1421575spa
dcterms.referencesS. V. Kodate, A. K. Yadav, and G. N. Kumar, Combustion, performance and emission analysis of preheated KOME biodiesel as an alternate fuel for a diesel engine, Journal of Thermal Analysis and Calorimetry, vol. 141, no. 6, pp. 2335-2345, 2020. https://doi.org/10.1007/s10973-020-09814-5spa
dcterms.referencesA. Cernat et al., Combustion of preheated raw animal fats-diesel fuel blends at diesel engine, Journal of Thermal Analysis and Calorimetry, vol. 140, no. 5, pp. 2369-2375, 2020. https://doi.org/10.1007/s10973-019-08972-5spa
dcterms.referencesS. Vedharaj, R. Vallinayagam, W. M. Yang, S. K. Chou, K. J. E. Chua, and P. S. Lee, Performance emission and economic analysis of preheated CNSL biodiesel as an alternate fuel for a diesel engine, International Journal of Green Energy, vol. 12, no. 4, pp. 359-367, 2015. https://doi.org/10.1080/15435075.2013.841162spa
dcterms.referencesS. S. Prabu, M. A. Asokan, S. Prathiba, S. Ahmed, and G. Puthean, Effect of additives on performance, combustion and emission behavior of preheated palm oil/diesel blends in DI diesel engine, Renewable Energy, vol. 122, pp. 196-205, 2018. https://doi.org/10.1016/j.renene.2018.01.068spa
dcterms.referencesS. Anis and G. N. Budiandono, Investigation of the effects of preheating temperature of biodiesel-diesel fuel blends on spray characteristics and injection pump performances, Renewable Energy, vol. 140, pp. 274-280, 2019. https://doi.org/10.1016/j.renene.2019.03.062spa
dcterms.referencesH. Hazar, H. Sevinc, and S. Sap, Performance and emission properties of preheated and blended fennel vegetable oil in a coated diesel engine, Fuel, vol. 254, p. 115677, 2019. https://doi.org/10.1016/j.fuel.2019.115677spa
dcterms.referencesA. T. Hoang, Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel, Energy, vol. 171, pp. 795-808, 2019. https://doi.org/10.1016/j.energy.2019.01.076spa
dcterms.referencesB. Sajjadi, A. A. A. Raman, and H. Arandiyan, A comprehensive review on properties of edible and non-edible vegetable oil-based biodiesel: Composition, specifications and prediction models, Renewable and Sustainable Energy Reviews, vol. 63, pp. 62-92, 2016. https://doi.org/10.1016/j.rser.2016.05.035spa
dcterms.referencesH. J. Berchmans and S. Hirata, Biodiesel production from crude Jatropha curcas L. seed oil with a high content of free fatty acids, Bioresource Technology, vol. 99, no. 6, pp. 1716-1721, 2008. https://doi.org/10.1016/j.biortech.2007.03.051spa
dcterms.referencesP. G. I. Thushari and S. Babel, Biodiesel Production From Waste Palm Oil Using Palm Empty Fruit Bunch-Derived Novel Carbon Acid Catalyst, Journal of Energy Resources Technology, vol. 140, no. 3, 2018. https://doi.org/10.1115/1.4038380spa
dcterms.referencesS. Sumathi, S. P. Chai, and A. R. Mohamed, Utilization of oil palm as a source of renewable energy in Malaysia, Renewable and Sustainable Energy Reviews, vol. 12, no. 9, pp. 2404-2421, 2008. https://doi.org/10.1016/j.rser.2007.06.006spa
dcterms.referencesS. S. Lam et al., Co-processing of oil palm waste and waste oil via microwave co-torrefaction: A waste reduction approach for producing solid fuel product with improved properties, Process Safety and Environmental Protection, vol. 128, pp. 30-35, 2019. https://doi.org/10.1016/j.psep.2019.05.034spa
dcterms.referencesS. A. Sulaiman and F. F. F. Taha, Drying of oil palm fronds using concentrated solar thermal power, in Applied Mechanics and Materials, 2015, vol. 699, pp. 449-454, 2015. https://doi.org/10.4028/www.scientific.net/AMM.699.449spa
dcterms.referencesW. Liew, K. Muda, M. Azraai, A. Affam, and S. Loh, Agro-industrial waste sustainable management - a potential source of economic benefits to palm oil mills in Malaysia, Journal of Urban and Environmental Engineering, vol. 11, no. 1, pp. 108-118, 2017. https://doi.org/10.4090/juee.2017.v11n1.108118spa
dcterms.referencesS. Suwanno et al., The production of biodiesel using residual oil from palm oil mill effluent and crude lipase from oil palm fruit as an alternative substrate and catalyst, Fuel, vol. 195, pp. 82-87, 2017. https://doi.org/10.1016/j.fuel.2017.01.049spa
dcterms.referencesP. Rosha, S. K. Mohapatra, S. K. Mahla, H. Cho, B. S. Chauhan, and A. Dhir, Effect of compression ratio on combustion, performance, and emission characteristics of compression ignition engine fueled with palm (B20) biodiesel blend, Energy, vol. 178, pp. 676-684, 2019. https://doi.org/10.1016/j.energy.2019.04.185spa
dcterms.referencesE. G. Giakoumis, A. M. Dimaratos, C. D. Rakopoulos, and D. C. Rakopoulos, Combustion instability during starting of turbocharged diesel engine including biofuel effects, Journal of Energy Engineering, vol. 143, no. 2, p. 4016047, 2017. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000402spa
dcterms.referencesL. Geng, L. Bi, Q. Li, H. Chen, and Y. Xie, Experimental study on spray characteristics, combustion stability, and emission performance of a CRDI diesel engine operated with biodiesel--ethanol blends, Energy Reports, vol. 7, pp. 904-915, 2021. https://doi.org/10.1016/j.egyr.2021.01.043spa
dcterms.referencesC. Sun et al., Experimental study of effects of exhaust gas recirculation on combustion, performance, and emissions of DME-biodiesel fueled engine, Energy, vol. 197, p. 117233, 2020. https://doi.org/10.1016/j.energy.2020.117233spa
dcterms.referencesM. Elkelawy et al., Experimental study on combustion, performance, and emission behaviours of diesel/WCO biodiesel/Cyclohexane blends in DI-CI engine, Process Safety and Environmental Protection, vol. 149, pp. 684-697, 2021. https://doi.org/10.1016/j.psep.2021.03.028spa
dcterms.referencesM. K. Yesilyurt, A detailed investigation on the performance, combustion, and exhaust emission characteristics of a diesel engine running on the blend of diesel fuel, biodiesel and 1-heptanol (C7 alcohol) as a next-generation higher alcohol, Fuel, vol. 275, p. 117893, 2020. https://doi.org/10.1016/j.fuel.2020.117893spa
dcterms.referencesM. K. Yesilyurt and M. Aydin, Experimental investigation on the performance, combustion and exhaust emission characteristics of a compression-ignition engine fueled with cottonseed oil biodiesel/diethyl ether/diesel fuel blends, Energy Conversion and Management, vol. 205, p. 112355, 2020. https://doi.org/10.1016/j.enconman.2019.112355spa
dcterms.referencesP. Verma, G. Dwivedi, A. K. Behura, D. K. Patel, T. N. Verma, and A. Pugazhendhi, Experimental investigation of diesel engine fuelled with different alkyl esters of Karanja oil, Fuel, vol. 275, p. 117920, 2020. https://doi.org/10.1016/j.fuel.2020.117920spa
dcterms.referencesA. de Oliveira, A. M. de Morais, O. S. Valente, and J. R. Sodré, Combustion characteristics, performance and emissions from a diesel power generator fuelled by B7-ethanol blends, Fuel Processing Technology, vol. 139, pp. 67-72, 2015. https://doi.org/10.1016/j.fuproc.2015.08.010spa
dcterms.referencesB. S. Chauhan, N. Kumar, and H. M. Cho, A study on the performance and emission of a diesel engine fueled with Jatropha biodiesel oil and its blends, Energy, vol. 37, no. 1, pp. 616-622, 2012. https://doi.org/10.1016/j.energy.2011.10.043spa
dc.contributor.corporatenameInternational Review of Mechanical Engineeringspa
dc.identifier.doihttps://doi.org/10.15866/ireme.v15i10.21423
dc.publisher.placeItaliaspa
dc.relation.citationeditionVol.15 N°.10. (2021)spa
dc.relation.citationendpage544spa
dc.relation.citationissue10 (2021)spa
dc.relation.citationstartpage538spa
dc.relation.citationvolume15spa
dc.relation.citesPardo García, C., Pabon, J., Fonseca Vigoya, M., Evaluation of Performance Parameters and Emissions of a Diesel Engine Fueled with Preheated Palm Oil Mill Effluent Biodiesel Blends, (2021) International Review of Mechanical Engineering (IREME), 15 (10), pp. 538-544.doi:https://doi.org/10.15866/ireme.v15i10.21423
dc.relation.ispartofjournalInternational Review of Mechanical Engineeringspa
dc.rights.accessrightsinfo:eu-repo/semantics/closedAccessspa
dc.subject.proposalPreheatingeng
dc.subject.proposalBiodiesel POMEeng
dc.subject.proposalEmissionseng
dc.subject.proposalPerformanceeng
dc.subject.proposalDiesel Engineeng
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.accessrightshttp://purl.org/coar/access_right/c_16ecspa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa


Ficheros en el ítem

FicherosTamañoFormatoVer

No hay ficheros asociados a este ítem.

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem