| dc.contributor.author | Bautista-Ruiz, Jorge | |
| dc.contributor.author | Aperador Chaparro, Willian | |
| dc.contributor.author | Olaya, Jhon | |
| dc.date.accessioned | 2021-12-07T20:46:25Z | |
| dc.date.available | 2021-12-07T20:46:25Z | |
| dc.date.issued | 2019 | |
| dc.identifier.uri | http://repositorio.ufps.edu.co/handle/ufps/1730 | |
| dc.description.abstract | The objective of this investigation was to obtain ceramic coatings of
bismuth titanate by Sol-gel synthesis on 316L stainless steel substrates
using bismuth nitrate pentahydrate (III) and titanium tetrabutoxide as
precursors. The characterization focused on determining wear rates,
coefficients of friction, adhesion, nano-hardness, and thickness of the
coatings, depending on the concentration of the precursors, the speed of
rotation and the number of layers. It is concluded that the sol presents
favorable conditions for their potential application as coatings on
metallic substrates | eng |
| dc.format.mimetype | application/pdf | spa |
| dc.language.iso | eng | spa |
| dc.publisher | Tribology in Industry | spa |
| dc.relation.ispartof | Tribology in Industry | |
| dc.rights | This is an open access journal which means that all content is freely available without charge to the user or his/her institution. All papers are licensed under a Creative Commons Attribution- NonCommercial 4.0 International License | eng |
| dc.source | http://www.tribology.rs/journals/2019/2019-3/2019-3-15.html | spa |
| dc.title | Characterization of the tribological properties of bismuth-titanate coatings synthesized by sol-gel on 316L stainless steel substrates | eng |
| dc.type | Artículo de revista | spa |
| dcterms.references | J. Bautista-Ruiz, W. Aperador, A. Delgado, M. Díaz-Lagos, Synthesis and Characterization of Anticorrosive Coatings of SiO2 -TiO2 - ZrO2 Obtained from Sol-Gel Suspensions, International Journal of Electrochemical Science, vol. 9, pp. 4144-4157, 2014 | spa |
| dcterms.references | H. Uchiyama, T. Bando, H. Kozuka, Effect of the amount of H2O and HNO3 in Ti(OC3H7 i)4 solutions on the crystallization of sol-gel-derived TiO2 films, Thin Solid Films, vol. 669, no. 1, pp. 157-161, 2019, doi: 10.1016/j.tsf.2018.10.050 | spa |
| dcterms.references | C. Brinker, G. Scherer, Sol–gel science: The physics and chemistry of sol–gel processing, San Diego: Academic Press, 1990 | spa |
| dcterms.references | B. Tlili, A. Barkaoui, M. Walock, Tribology and wear resistance of the stainless steel. The sol–gel coating impact on the friction and damage, Tribology International, vol. 102, pp. 348-354, 2016, doi: 10.1016/j.triboint.2016.06.004 | spa |
| dcterms.references | H. Cheraghi, M. Shahmiri, Z. Sadeghian, Corrosion behavior of TiO2–NiO nanocomposite thin films on AISI 316L stainless steel prepared by sol–gel method, Thin Solid Films, vol. 552, pp. 289-296, 2012, doi: 10.1016/j.tsf.2012.07.125 | spa |
| dcterms.references | G. Ruhi, O.P. Modi, A.S.K. Sinha, I.B. Singh, Effect of sintering temperatures on corrosion and wear properties of sol–gel alumina coatings on surface pre-treated mild steel, Corrosion Science, vol. 50, iss. 3, pp. 639-649, 2008, doi: 10.1016/j.corsci.2007.10.002 | spa |
| dcterms.references | S.A. Omar, J. Ballarre, S.M. Ceré, Protection and functionalization of AISI 316L stainless steel for orthopedic implants: hybrid coating and sol gel glasses by spray to promote bioactivity, Electrochimica Acta, vol. 203, pp. 309-315, 2016, doi: 10.1016/j.electacta.2016.01.051 | spa |
| dcterms.references | S.M. Hosseinalipour, A. Ershad-langroudi, A. Nemati, A.M. Nabizade-Haghighi,Characterization of sol–gel coated 316L stainless steel for biomedical applications, Progress in Organic Coatings, vol. 67, iss. 4, pp. 371-374, 2010, doi: 10.1016/j.porgcoat.2010.01.002 | spa |
| dcterms.references | S. Rahoui, V. Turq, J.-P. Bonino, Effect of thermal treatment on mechanical and tribological properties of hybrid coatings deposited by sol–gel route on stainless steel, Surface and Coatings Technology, vol. 235, pp. 15-23, 2013, doi: 10.1016/j.surfcoat.2013.07.008 | spa |
| dcterms.references | A. Alvarez-Vera,H.M. Hdz-García, R. Muñoz-Arroyo, J.C. Diaz-Guillen, A.I. Mtz-Enriquez, J.L. AcevedoDávila, Tribological study of a thin TiO2 nanolayer coating on 316L steel, Wear, vol. 376, pp. 1702- 1706, 2017, doi: 10.1016/j.wear.2017.01.029 | spa |
| dcterms.references | C. Belon, M. Schmitt, S. Bistac, C. Croutxé-Barghorn, A. Chemtob, Friction and wear properties of hybrid sol–gel nanocomposite coatings against steel: Influence of their intrinsic properties, Applied Surface Science, vol. 257, iss. 15, pp. 6618-6625, 2011, doi: 10.1016/j.apsusc.2011.02.088 | spa |
| dcterms.references | I. Piwoński, K. Soliwoda, The effect of ceramic nanoparticles on tribological properties of alumina sol–gel thin coatings, Ceramics International, vol. 36, iss. 1, pp. 47-54, 2010, doi: 10.1016/j.ceramint.2009.06.024 | spa |
| dcterms.references | G. Ji, Z. Shi, W. Zhang, G. Zhao, Tribological properties of titania nanofilms coated on glass surface by the sol–gel method, Ceramics International, vol. 40, iss. 3, pp. 4655-4662, 2014, doi: 10.1016/j.ceramint.2013.09.006 | spa |
| dcterms.references | F. Alférez, J.J. Olaya, J. Bautista-Ruiz, Síntesis y evaluación de resistencia a la corrosión de recubrimientos de SiO2-TiO2-ZrO2-BiO2 sobre acero inoxidable 316L producidos por sol-gel, Boletín, de la Sociedad Española de Cerámica y Vidrio, vol. 57, iss. 5, pp. 195-206, 2018, doi. 10.1016/j.bsecv.2018.02.001 | spa |
| dcterms.references | S. Omar, F. Repp, P. Desimone, R. Weinkamer, W. Wagermaier, S. Ceré, J. Ballarre, Sol–gel hybrid coatings with strontium-doped 45S5 glass particles for enhancing the performance of stainless steel implants: Electrochemical, bioactive and in vivo response, Journal of NonCrystalline Solids, vol. 425, pp. 1-10, 2015, doi: 10.1016/j.jnoncrysol.2015.05.024 | spa |
| dcterms.references | A. Marsal, F. Ansart, V. Turq, J.P. Bonino, J.M. Sobrino, Y.M. Chen, J. García, Mechanical properties and tribological behavior of a silica or/and alumina coating prepared by sol-gel route on stainless steel, Surface and Coatings Technology, vol. 237, pp. 234-240, 2013, doi: 10.1016/j.surfcoat.2013.06.037 | spa |
| dcterms.references | M.S. Kartavtseva, A.R. Kaul, T.V. Murzina, S.A. Savinov, A. Barthélémy, BiFeO3 thin films prepared using metalorganic chemical vapor deposition, Thin Solid Films, vol. 515, iss. 16, pp. 6416-6421, 2007, doi: 10.1016/j.tsf.2006.11.133 | spa |
| dcterms.references | J. Bautista-Ruiz, Caracterización Anticorrosiva y de Biocompatibilidad en Recubrimientos SilicioTitanio-Zirconio Sintetizados Vía Sol-gel y Depositados sobre Sustratos de Acero Inoxidable, Información Tecnológica, vol. 29, no. 1, pp. 201- 210, 218, doi: 10.4067/S0718- 07642018000100201 | spa |
| dcterms.references | S. Pourhashem, A. Afshar, Double layer bioglasssilica coatings om 316L stainless steel by sol-gel method, Ceramics International, vol. 40, iss. 1, pp. 993-1000, 2014, doi: 10.1016/j.ceramint.2013.06.096 | spa |
| dcterms.references | A. Owens, S. Brühl, S. Simison, C. Forsich, D. Heim, Comparison of tribological properties of stainless steel with hard and soft DLC coatings, Procedia Materials Science, vol. 9, pp. 246–253, 2015, doi: 10.1016/j.mspro.2015.04.031 | spa |
| dcterms.references | C. Lavollée, M. Gressier, J. García, J. Sobrino, J. Reby, M. Rossi, New architectured hybrid sol-gel coatings for wear and corrosion protection of low-carbon steel, Progress in Organic Coatings, vol. 99, pp. 337-345, 2016, doi: 10.1016/j.porgcoat.2016.06.015 | spa |
| dcterms.references | B. Pietrzyk, S. Miszczak, Ł. Kaczmarek, M. Klich, Low friction nanocomposite aluminum oxide/MoS2 coatings prepared by sol-gel method, Ceramics International, vol. 47, iss. 7, pp. 8534-8539, 2018, doi: 10.1016/j.ceramint.2018.02.055 | spa |
| dcterms.references | A. Veber, Š. Kunej, D. Suvorov, Synthesis and microstructural characterization of Bi12SiO20 (BSO) thin films produced by the sol-gel process. Ceramics International, vol. 36, iss. 1, pp. 245- 250, 2010, doi: 10.1016/j.ceramint.2009.07.024 | spa |
| dcterms.references | H. Gua, C. Dong, P. Chena, D. Bao, A. Kuang, X. Lic, Growth of layered perovskite Bi4Ti3O12thin films by sol–gel process, Journal of Crystal Growth, vol. 186, iss. 3, pp. 403-408, 1998, doi: 10.1016/S0022-0248(97)00508-3 | spa |
| dcterms.references | W. Oliver, G. Pharr, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments, Journal of Materials Research, vol. 7, iss. 6, pp. 1564–1583, 1992, doi: 10.1557/JMR.1992.1564 | spa |
| dc.identifier.doi | 10.24874/ti.2019.41.03.15 | |
| dc.publisher.place | Belgrado , Serbia | spa |
| dc.relation.citationedition | Vol.41 No.3.(2019) | spa |
| dc.relation.citationendpage | 462 | spa |
| dc.relation.citationissue | 3 (2019) | spa |
| dc.relation.citationstartpage | 452 | spa |
| dc.relation.citationvolume | 41 | spa |
| dc.relation.cites | Bautista-Ruiz, J., Chaparro, A., & Olaya, J. J. (2019). Characterization of the Tribological Properties of Bismuth-titanate Coatings Synthesized by Sol-gel on 316L Stainless Steel Substrates. Tribology in Industry, 41(3). | |
| dc.relation.ispartofjournal | Tribology in Industry | spa |
| dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
| dc.rights.creativecommons | Atribución-NoComercial 4.0 Internacional (CC BY-NC 4.0) | spa |
| dc.subject.proposal | Tribological | eng |
| dc.subject.proposal | Wear | eng |
| dc.subject.proposal | Sol-gel | eng |
| dc.subject.proposal | Bimuth-titanate | eng |
| dc.subject.proposal | Thin films | eng |
| dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
| dc.type.content | Text | spa |
| dc.type.driver | info:eu-repo/semantics/article | spa |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
| oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
| oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
| dc.type.version | info:eu-repo/semantics/publishedVersion | spa |
